Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
User Panel

Posted: 4/6/2001 10:27:15 AM EDT
Would someone please tell me where I would be able to look up serial #'s to verify pre-ban AR's...... I appreciate the info, Dudley
Link Posted: 4/6/2001 11:07:57 AM EDT
[#1]
If I'm not mistaken, all of that information along with a lot of other good stuf used to be on the front page of the old site. I can't seem to find it at the moment.
[:\]
Link Posted: 4/6/2001 11:10:51 AM EDT
[#2]
call colt direct ,give them your serial number.
Link Posted: 4/6/2001 11:17:29 AM EDT
[#3]
[url]http://home1.gte.net/bblakley/ban/index.htm[/url]
Link Posted: 4/6/2001 11:24:04 AM EDT
[#4]
Princeton,
That is some great information to have.  I should book mark that.  Thanks!
Link Posted: 4/6/2001 11:34:21 AM EDT
[#5]
www.brownells.com/benchtalk/BTK-001-005.htm
Link Posted: 4/6/2001 11:50:02 AM EDT
[#6]
American Spirit Arms (Formerly "Sun Valley Traders")
ALL lowers are Post-Ban. Began introduction of lowers and rifles in mid/late 1998. Noted as having good fit & finish. Also, reported to be manufactured by Lewis Machine & Tool.

Armalite/Eagle 800-336-0184
Slightly over S/N 30,000 was the Pre-Ban cut-off, call to verify.* (Some Eagle lowers below the 30,000 range were determined to be POST ban by BATF - call to verify) Armalite sells Eagle lowers, but sells factory complete rifles with Armalite lowers.

Bohica
Made stainless steel lowers, rumored to have also made AR-15 pistols. Lower marked M16-SA. This is NOT verifiable info as it came from the Internet. Out of Business.

Bushmaster 800-998-SWAT
Below L051000 - Assembled Pre-Ban Rifles and some pre-94 lowers.**
L051001-L063000 - Mixed Pre-Ban Assembled Rifles and Pre-Sept 94 Lowers (Call to verify)
L063001 and Up - Post-Ban


Century Arms
Lower marked CIA. All are Post-Ban. Made with Olympic Arms Receivers under contract.

Colt 800-962-COLT
CC001616 and Below - Pre-Ban
CH019500 and Below - Pre-Ban
GC018500 and Below - Pre-Ban
LH011326 and Below - Pre-Ban
MH086020 and Below - Pre-Ban
NL004800 and Below - Pre-Ban
SL027246 and Below - Pre-Ban
SP360200 and Below - Pre-Ban
1963 SP00001-SP00023**
1964 SP00101
1965 SP02501
1966 SP05600
1967 SP08250
1968 SP10750
1969 SP14000-SP14653
1970 SP15001-SP15473
1971 SP16001
1972 SP19401
1973 SP24201
1974 SP32601
1975 SP43801
1976 SP55301
1977 SP67651
1978 SP83400
ST038100 and Below - Pre-Ban
TA10100 and Below - Pre-Ban
BD000134 and Below - Pre-Ban (AR-15A3 Tactical Carbine - very rare model)
MT00001 and Above - Post-Ban
BK000001and Above - Post Ban (CAR-A3)
CST000001 and Above - Post-Ban (Began Late 1997 Production)
CMH000001 and Above - Post Ban
CCH010000 and Above - Post Ban MT6700, MT6700C and MT6700CH series, 1998 production


Dalphon (360) 427-6867
All are POST ban. Cast 356-T6 Aluminum, hardcoat anodized per mil-spec A-8625

DPMS 800-578-3767
Below 10300 - Pre-Ban.
Some or all lowers are cast. Black in color. Some lowers are Stainless Steel.

Eagle Arms 309-944-6939
Now called ArmaLite. They will not give out a list, but will look up on an individual basis. Lower receiver serial numbers DO NOT begin with EA.

Essential Arms
All are Pre-Ban as they went out of business in 1993. (DPMS bought them prior to the Ban) Call DPMS Lower receiver serial numbers begin with EA. Some or all lowers are cast. Light gray coloring. It is rumored that Ruger investment casted the lowers for Essential Arms.

Frankford Arsenal
All are pre-ban. As rumor has it, Olympic Arms produced the lowers for Frankford Arsenal Call Olympic Arms and then Frankford assembled the weapon. A2 configuration lower. Frankford Arsenal went out of business in 1987. (Info from [email protected])

Hesse Arms
All AR-15’s are post ban. Manufacturing began late 1997/early 1998.

J.L.M & Sons* (603) 425-1860
SC001 thru SC250 are Pre-Ban. All others are post ban.

Knights Armament Co.
All AR-15’s are post ban, very few AR-10’s are pre-ban. No further info at this time.

Military Manufacturing (M2) (FAX 702-263-7875)
All were military/law enforcement only. Full auto lowers were standard, semi were optional. Lowers were machined form raw bar stock with improvements incorporated - 18deg magazine angle and square mag release. (See: http://www.m2corp.com/HOME.htm)

Nesard
See "Sendra" below.

O
Link Posted: 4/6/2001 12:00:17 PM EDT
[#7]
Dudley, welcome to the board.  It is good to see you over here.  It looks like most of the needed information has already been posted.  You can also find the Colt information at [url]www.biggerhammer.net[/url].
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top