Quoted:
Quoted:
Is it a law in your state to pin the stock? // Why would you want to pin the stock for?
Sounds like he's moving to New York.
Not to side-track this, but how do you like the Kriss? I've been toying around with setting one up as a suppressed SBR.
I love the Kriss. One thing you can do, to help save money and tax stamp filing is to get the CARBINE and taxstamp for a suppressor. then permanently attach the suppressor to the Carbine. No need for SBR tax stamp.
Anyway I already moved to NY last October. Been here a year and havent shot anything. I moved to Rockland County which is lower Hudson Valley.
NYS does not allow two of the AWB critieria. One for sure is the folding stock. So i have to do something about it. The second one is the "pistol grip" which is debateable since the letter of the law is "conspicuous grip that protrudes beneath the action of the gun" On the Kriss, the grip does NOT protrude conspicuously and it is behind the action. However it is real gray area.
Here are some pictures of what I did to "pin" the stock.
Here you can see the channel that the catch slides back into in order to release the stock from the upper receiver.
This piece from a large Ziptie is a perfect fit for that channel.
Then I taped it over so the piece cant fall out.
Then I slide the stock to the left and when the hinge holes line up, I put the sling mount pin through it.
My sling mount pin is installed using a small hex wrench. Normally the stock pin is a simple push pin. one of the LEO suggested I use a non standar screw like a torx rather than hex. I will look into that. You cannot close the stock now without removing the stock sling mount pin.
I look at this like an AR-15 with full sized M-16 stock. Those stocks do not need to be permanently attached to the lower receiver. They are held with a bolt. Same as mine.