User Panel
Posted: 7/21/2011 12:08:39 PM EDT
Let's use this thread as a FAQ entry for what everyone likes for pots and pans.
|
|
Daddy loves you. Now go away.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape. |
I tend to buy discontinued Kitchen Aid from Tuesday Mornings.
I have never found one I love. If I settle down into a house I love: Mauviel Set Copper cookware: The last part of the cooking equation that needs to be considered is how the heat gets from the outside of the vessel to the inside. through different metals at different rates. The common metals used in pots — copper, aluminum, stainless steel, iron, steel — all have different rates of heat transfer. The quickest (best?) heat transfer is through copper. The rate of transfer decreases in speed with aluminum being the next fastest and the iron-based metals the slowest. The rate of transfer is also a function of material thickness. As logic would dictate, the thinner the material, the faster heat will transfer through it. But if too thin, there will be hot spots produced by the uneven application of heat by the burner. The ideal vessel combines a thick enough wall with a fast enough heat transfer to cook evenly and with appropriate speed. Link |
|
|
Frying/saute pans: I think the staple for most of us is a good 12" non-stick pan (I'll leave the SS varieties to someone with more knowledge). The thing with non-stick pans is that the coating will wear down over time and will start to stick. How soon depends on how much you use it and how gently you treat it. Either way, it's probably a good idea to NOT blow a huge chunk of change on one.
Personally, I've been happy with the Bakers and Chef's pans from Sam's Club. The 12" non-stick pan runs about $15, is heavy-gauge aluminum, non-stick, and a silicone-covered handle. I also like Calphalon hard-anodized pans, but they are more expensive of course. |
|
Daddy loves you. Now go away.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape. |
Dishwasher safety: Most aluminum pans are NOT dishwasher safe. Make sure to check the box and/or manual. The reason for this is the harsh chemical in dishwasher detergent, which is usually a strong lye. These lyes attack aluminum with gusto and discolor/etch it in short order. If you don't care that your pan looks bad, then this might not be an issue for you. Even expensive pots and pans could be subject to this, so make sure you check before throwing them in the dishwasher.
|
|
Daddy loves you. Now go away.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape. |
Don't buy boxed sets.
They seem like a good idea, but they're not. For one thing, the 14 piece set is really about 6 undersized pots, 6 lids, and 2 spatulas. You will most likely find that you won't use the majority of the pieces most of the time. Seriously - a 1qt. sauce pan is simply not very useful. Buy your pieces individually, even if you're on a budget. Start cheap, and you can always toss out a piece when you replace it with something nicer. To start with, I'd highly recommend a 12" saute/fry pan, one or two 3qt. sauce pans, and a bigger pot to boil soups/pasta/potatoes. |
|
Daddy loves you. Now go away.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape. |
Calphalon for regular usage.
Cleans up with green scuffpads. Calphalon non-stick omelet and saute pans. Cleans up inside with blue scuffpad/sponges. For sale at Mothers Day Sales every year at disposable prices. |
|
Fuck Obama
I agree with uxb |
Swiss Diamond
easily my favorites I have all-clad, kitchen aid (clad), various others.... |
|
|
Originally Posted By Lovelessk999:
I tend to buy discontinued Kitchen Aid from Tuesday Mornings. I have never found one I love. If I settle down into a house I love: Mauviel Set Copper cookware: The last part of the cooking equation that needs to be considered is how the heat gets from the outside of the vessel to the inside. through different metals at different rates. The common metals used in pots — copper, aluminum, stainless steel, iron, steel — all have different rates of heat transfer. The quickest (best?) heat transfer is through copper. The rate of transfer decreases in speed with aluminum being the next fastest and the iron-based metals the slowest. The rate of transfer is also a function of material thickness. As logic would dictate, the thinner the material, the faster heat will transfer through it. But if too thin, there will be hot spots produced by the uneven application of heat by the burner. The ideal vessel combines a thick enough wall with a fast enough heat transfer to cook evenly and with appropriate speed. Link JESUCRISTO! MY FIRST HOUSE DIDN'T COST THAT MUCH! that being said, i'm pretty happy with clad and cast iron, as well as a couple 'o Zhukov's sam's club saute' pans. -tom |
|
|
I bought the Calphalon 10 piece box set. It was $599, but I had a 20% off coupon that sold me on the box set. $480 was a good deal I felt.
The pans are both different. One is slide nonstick and the other is sear non-stick. I used the sear to blacken salmon tonight. It was great. I think I'll try some eggs on the slide pan tomorrow. The pots are great too. I think I might get another 3 qt pot, and I'll be set for most of my cooking for my small family. |
|
ARFCOM.....Time well wasted.
Originally Posted By Keith_J: Just remember to pay it forward. If someone is in need, do something positive. |
I looked at pot sets that had utensils......they were out.
The Emerald sets that had the aluminum brass laminate bottom was shitcanned and returned after the online reviews showed the problems at high heat. with gas I'm still open for good cookwear for my RV. let me know. |
|
ARFCOM.....Time well wasted.
Originally Posted By Keith_J: Just remember to pay it forward. If someone is in need, do something positive. |
I personally think All Clad are the best of the best but they're expensive as hell. I was talking to my 19 yr old daughter and she said TJ Max frequently has them.. So I checked them out and got a $235 pan for $60. Also check out Bed Bath and Beyond. I've got a few slightly dented Emeril pans for 60% off.
|
|
I cook with wine and sometimes it ends up in the food
|
I use cast iron & am currently looking for the Granite Ware pots for the smaller pieces of my cookware. Simple & universal.
I had bought T-Fal years ago & the teflon coating started coming off recently, so I threw them out & got the cast iron. |
|
<font size=2>Jack Kevorkian for White House Physician.</font id=blue>
<font color=red><font size=2>You can get further with kind words and a gun then kind words alone.</font id=s2></font id=red> |
America's Test Kitchen has done a review of 12" non-stick saute pans. The hands-down winner was the following: http://www.amazon.com/T-Fal-Professional-Total-Nonstick-2-Inch/dp/B000GWG0T2
T-Fal Professional Total Nonstick 12-1/2-Inch Saute PanOne of the tests involved cooking eggs without oil to see how many they could cook before the eggs would start sticking. Most started sticking at 10-20 eggs, this one they had to stop at 75+ eggs. It had the most layers of teflon, cooked the most even, etc. For $30, it's an incredible bargain. I ordered one myself and got it this week. Here are their comments: http://www.cooksillustrated.com/equipment/overview.asp?docid=25947 |
|
Daddy loves you. Now go away.
Originally Posted By PAEBR332: Congratulations. This post has a created a stupidity event horizon from which no logic, reason or science will ever escape. |
I have health Craft. All SS.
|
|
NRA Life Member
|
I'll second the Health Craft. They are made by Vita Craft in Shawnee, Ks. and I bought mine at the outlet store there.
|
|
|
go to a restaurant supply and get eagleware or the equivalent. with proper care they will last you for as long as you're cooking. shop around as different stores will price them differently. the pans you get at sam's are ok,too. i don't use teflon-coated pans, as i don't like the thought of having microscopic pics of teflon in my food. ymmv.
|
|
if it smells like trout, get the hell out:
paraphrased from mryenko |
Tfal SS. I won't use anything else. Heats evenly, cleans up quick and can really take a beating. I've even thrown one into a 450* oven before with no problems.
|
|
|
Originally Posted By thebomber:
I personally think All Clad are the best of the best but they're expensive as hell. I was talking to my 19 yr old daughter and she said TJ Max frequently has them.. So I checked them out and got a $235 pan for $60. Also check out Bed Bath and Beyond. I've got a few slightly dented Emeril pans for 60% off. I got a fair amount of All-clad skillets and pots as wedding gifts. They have worked great so far. |
|
Let us disappoint the Men who are raising themselves upon the ruin of this Country.
~John Adams |
Allclad Copper Core if you can afford it, or used cast iron.
Forget nonstick. Learn how to use a metal pan. Th Coper Core is the best commonly availble in the US, but if you're a hard-head or are seriously on a budget, get used cast iron. Clean them well and then season them well and learn how to cook with them. It doesn't get better, but it does get easier with the Copper Core option above. The intermediate steps are not worth the delta in money over the cast iron, IMO.
|
|
|
All Clad copper core
Le Creuset My wife and I got a bunch of this for our wedding. I cant imagine cooking with anything else. |
|
The helicopter is probably the most versatile instrument ever invented by man. It approaches closer than any other to fulfillment of mankind's ancient dreams of the flying horse and the magic carpet. —Igor Ivanovitch Sikorsky
|
Originally Posted By rwilkins01:
go to a restaurant supply and get eagleware or the equivalent. with proper care they will last you for as long as you're cooking. shop around as different stores will price them differently. the pans you get at sam's are ok,too. i don't use teflon-coated pans, as i don't like the thought of having microscopic pics of teflon in my food. ymmv. This. Exactly. I could not have said it better. You might be surprised how cheap some stuff is at the local restaurant supply house. Sam's pans are a good second. I occasionally use good ole Lodge Cast Iron. Depends on the dish. When I was younger, I used a Revere Ware set (copper bottom) from my Grandmother and Mother, probably from the '50s. They do cook well, and are very responsive, I have kept them all. I still use the big Dutch Oven, but find that the skillets need too much oil for my tastes and health to work well. I am currently on a diet that allows no fat at all. I use the non-stick skillets from Sam's to pan fry my chicken, beef and fish dry (no oil). Saute onions with a little water. It does work. Lost 17 pounds so far. I would go for these "better value" pans and plan to replace them every decade or so. Although, I do have a hard time throwing any pan out in the trash. |
|
|
Originally Posted By krpind:
I bought the Calphalon 10 piece box set. It was $599, but I had a 20% off coupon that sold me on the box set. $480 was a good deal I felt. The pans are both different. One is slide nonstick and the other is sear non-stick. I used the sear to blacken salmon tonight. It was great. I think I'll try some eggs on the slide pan tomorrow. The pots are great too. I think I might get another 3 qt pot, and I'll be set for most of my cooking for my small family. I have Calphalon ones too and love them. I would agree though with the previous post that says don't buy boxed sets. That's true for my needs especially since there are only two of us in the household and the boxed sets tend to be bigger in size than what we need for most meals. I own the Calphalon Panini Pan and LOVE it. You got a good deal on your set though! |
|
|
Originally Posted By thebomber:
I personally think All Clad are the best of the best but they're expensive as hell. I was talking to my 19 yr old daughter and she said TJ Max frequently has them.. So I checked them out and got a $235 pan for $60. Also check out Bed Bath and Beyond. I've got a few slightly dented Emeril pans for 60% off. All-Clad are American-made. Martha Stewart uses them I believe. Great set. |
|
|
Calphalon One here.
You can get seconds at the outlets for 70% off. Can't even tell where they were dented or scratched on 4 of the 5 I have and the one that you can see it is minor. Still have a lifetime warranty too. $195 10" skillet for $43 is not too bad. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.