[b]WTS M4 SOCOM/SOPMOD Upgrades! Including; Bolt & Carrier, Buffer, Flash Suppressor & MORE![/b]
Just scroll down and see what you might need!!
>>>KEEP IN MIND, ALL prices INCLUDE PRIORITY SHIPPING within lower 48 United States.<<<<
>>>I accept Pay-Pal (+3.5%) or Money Orders.<<<
[b]>>>To purchase, simply contact me at email@example.com or call (828) 289-4498. <<<[/b]
[b]= CURRENT SOCOM spec. Bolt and Carrier upgrade parts!![/b]
EVERYTHING you need to upgrade to CURRENT SOCOM spec. Bolt and Carrier!!!
This is the carrier only, your current bolt only needs a few upgrades to the extractor area to meet specs. The ones I sell are current Colt production M4 "semi-auto" carriers. They are made in the "semi-auto" configuration for the Law Enforcement community. We've outfitted a lot of LE rifles from local, state and other state agencies with the new Carrier and bolt upgrades.
[b]-COLT M4 LE (Civilian/Semi-Auto) Bolt Carrier, $150.00[/b]
[b]-New improved Colt Extractor Spring assembly, $6.00.[/b]
[b]-D-Fender, D-ring for extractor spring, $16.00.[/b] (See Picture)
[b]-COLT BOLT with upgrades included, $94.00.[/b]
[b]= Other Weapons Upgrades:[/b]
[b]-ACCU-Wedge, $6.00.[/b] (See Picture)
[b]-Gapper, $5.00.[/b] (See Picture)
[b]-Pre-Ban, NEW, 30 round magazines with green followers, $30.00 each.[/b] (See Picture)
[b]= Tactical Rubber Band[/b]
(Don't laugh! Try to find a bicycle tube the exact size to do this!)
For use on Knight's Vertical Fore Grips.
Holds your Pressure Switch/Switches in place even under the heat of battle! Throw away the Velcro. If you ever put it under some real heat it will come loose, move and fall off. Leaving you with a large sticky mess on the grip and no pressure switch, when you need it the most! Our Tactical Rubber Band solves that problem. It's the perfect diameter to give a tight fit, holding your pressure switch/switches in place on your vertical fore grip BUT not so tight as to activate the switch. The perfect fit!
[b]-Tactical Rubber Band $6.00 each.[/b]
>>>Also available for other Vertical Fore Grips, e-mail me with your type to see if we stock the band for it.<<<
[b]= AAC Flash Suppressor, (SOPMOD interchangeable!)[/b]
The AAC Flash Suppressor is designed to accept the AAC M4-2000 suppressor. It is designed to accept and interchange with all SOPMOD M4 accessories. The M4-2000 was just featured in winter 2003 edition of Special Weapons for Military and Police.
The article, written by Al Paulson, described the M4-2000 system as "well designed and a splendid performer".
If you are interested in the M4-2000 SOUND suppressor, you’ll need to call the shop. The SOUND suppressor is a class III item.
HOWEVER, if you are a collector of military weapons and just want the flash suppressor for your PRE-BAN AR15, the price is below. I've put this flash suppressor on all of my M4s, its an awesome addition to your Main Battle Rifle.
[b]-AAC M4-2000 Flash Suppressor, $90.00.[/b]
[b]= NEW SOCOM Rate Reducing Buffer!![/b]
I also have a NEW BUFFER that has been tested by SOCOM and ordered for US Spec-Ops! SOCOM has ordered these to reduce the cycle rates in their full auto M4s. It brings the rate from over 750 to a more controllable around 600 RPM. In semi auto rifles it reduces the recoil and speeds in target re-acquisition time. We are getting these DIRECT from the SOCOM contract supplier, with everything going on with the war our supplies are very limited.
[b]-NEW SOCOM M4 Buffer, $150.00.[/b]
[b]=We have a second unit that is the same buffer as the M4 but it comes with an insert to allow you to use your standard (A2) length tube and spring.[/b] ALSO, it will work with the “POST BAN Fixed M4 Stocks” that use full-length tubes!
[b]-New SOCOM M16/AR15 A2 Buffer, $165.00.[/b]
>>>>> Thanks for stopping to look. <<<<<