All tools are in stock now.
Receiver wrenches $50.
Barrel vises $60.
Wrench and vise for $105.
Steel vise base add $30 - recommended if you do not have a VERY HEAVY DUTY bench vise.
All prices include shipping via USPS priority mail.
Wrench fits all known metric receivers. Some inch receivers will require minor fitting.
Barrel vise fits standard profile barrels, inch and metric.
- Cashier's check or money order (preferred)
- PayPal to firstname.lastname@example.org
- Personal check (requires two-week wait before shipping. )
Please mail to:
12208 Glen Canyon Rd. NE
Albuquerque, NM 87111
When ordering, please remember to include your shipping and e-mail addresses.
For questions or comments, please e-mail me at email@example.com
The profile of these wrenches accomodates the small boss on the bottom of the Dan Coonan receivers. These were designed to be used with either 3/4 or 1/2-inch breaker bars, plus they include two thru-holes for attachment of a home-made handle, or for bolting to a work bench. Firmly fixed to a work bench, the open-end wrench method may be used for barrel installation without the need for a large bench vise.
These wrenches have slots in the top half. It makes the fit of the wrench to the receiver more flexible and universal.
They are made from high-carbon hot-rolled steel. [COLOR=blue]Available only in the white.
[/COLOR] Purchasers will want to add some type of protective finish: cold blue, paint, park, etc. I keep the cost down by not adding a finish.http://chilirat.com/FAL_tools/wrench_improved.jpghttp://chilirat.com/FAL_tools/vise_1_post.jpghttp://chilirat.com/FAL_tools/vise_2_post.jpghttp://chilirat.com/FAL_tools/vise_3_post.jpg
Buy both the vise and the base. With this setup, no need for a large bench vise.http://chilirat.com/FAL_tools/vise_and_base_post.jpg
Vise base is steel, 3/8" thick. Add to your barrel vise.http://chilirat.com/FAL_tools/base_post.jpg
The following thread shows a test of the aluminum barrel vise:Barrel vise test
LINK FIXED !
Here are the "legacy" marketplace threads:WTS: Receiver Wrenches WTS: Barrel Vises and Bases
NOTE: Marketplace feedback is appreciated. Thanks. http://chilirat.com/emoticons/chilirat.gif