Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/4/2006 12:58:25 PM EDT
I found a list at RTG but was wondering what others might also suggest for my PTR91F.

Does anyone sell kits?

TIA

Seydou
Link Posted: 1/4/2006 2:16:06 PM EDT
[Last Edit: 1/4/2006 2:16:56 PM EDT by osprey21]
Haven't seen any replacement parts "kits" persay, only collections of parts the various owners thought were necessary.

FWIW.. I shoot the living crap out my HK91/G3 clone (w/sear pack) and have yet to replace ANY part but the extractor spring(s).
Link Posted: 1/4/2006 10:57:26 PM EDT
w/ exception of springs, I keep spare guns, really. murphy's law, just like on my old Harley, if I got it in my saddlebag/rangebag, it's never gonna break/be lost

If I see a part wearing, then I get another

usually I only break parts when I don't know what I'm doing, part of learning experience, then it don't happen again


but I did buy a whole bunch from Robert... figure never get cheaper than right now
Link Posted: 1/6/2006 11:02:23 PM EDT
specific to hk91, was told by leo friend that is armorer...

never, ever take trigger group apart... or I'd have to be calling him, he said no need

so I skipped buying spare trigger

but from mult. total disassembly, I think I'm more likely to lose small parts than break parts

so I got spare charging handle, pin, spring

and took bolt assy apart and got spare springs, rollers, pins, etc.

and got locking assy, and firing pin, cheap but important

for recoil spring--just bought green hardware, was cheap plus came w/ stock pins


but, I don't expect anything to break especially now that I got parts
Link Posted: 1/7/2006 4:02:46 AM EDT

Originally Posted By ChopperBob:
I don't expect anything to break especially now that I got parts


You're right, stuff never seems to break when you have the spare parts.
Link Posted: 1/7/2006 11:36:04 AM EDT
1.Magazines
2.+2 rollers,including the plate and a new roll pin.
3.Extractor and spring.
4.Firing pin and spring
5.Locking piece-also effects head spacing just like the rollers.
6.Bolt head
7.Slide out section of the entire trigger mechanism.
You can send just this section for a trigger job ,and keep it as a drop in spare.
8.Selector switch-I've seen em break.
9.Magazine catch assembly-including new roll pin.
10.+4 rollers,including plate and new roll pin.

I'm poor ,so that,s my abbreviated list.
Chances are ,that should carry you to the life span of the weapon.

Which will probably last longer than most of us,depending on how often you
heat up the barrel with constant rapid fire.

You just have to once in a while .
Link Posted: 1/8/2006 8:09:36 AM EDT
Thanks for all the input.

Seydou
Link Posted: 1/8/2006 4:02:40 PM EDT
LP,roller, firing pin spring,,locking arm,,bolt head, ejector or complete FCG
Link Posted: 1/8/2006 7:25:53 PM EDT
BTT
Link Posted: 1/8/2006 7:30:06 PM EDT
[Last Edit: 1/8/2006 7:32:19 PM EDT by wildearp]
It is no big deal to take apart a trigger group. Just don't lose the parts and pay attention.

I think the rollers wear to cause excessive head space and have heard they can be replaced to restore correct dimensions.

I traded my G3 before I had to worry about it. Now I want another one.

I also found that if you start to progressively shorten the hammer spring to lighten the trigger pull, that you will need to replace said spring. DOH!!

It had, hands down, the worst trigger pull of anything I have ever seen. I hear that is normal...
Link Posted: 1/8/2006 7:55:24 PM EDT

Originally Posted By wildearp:


It had, hands down, the worst trigger pull of anything I have ever seen. I hear that is normal...



A Williams trigger job fixes this in a MAJOR way!
Link Posted: 1/11/2006 9:54:58 AM EDT
The Bill Springfield Trigger job is great and the price is very right at just under $50 shipped!

It made a HUGE difference in the shootability of the gun.

I think HK figures that WAY Heavy, Long, Gritty trigger is really a back up safety, because you REALLY have to WANT to shoot to muster the strenght to pull it!!

BIGGER_HAMMER
Top Top