Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 12/23/2005 9:08:20 AM EDT
That is the question! My DSA needs a little help to discourage jaming. Seems to feed right but the bolt won't close 100%, maybe 5-10 times in a hundred rounds. Thanks!
Link Posted: 12/23/2005 12:33:59 PM EDT
[Last Edit: 12/23/2005 12:35:07 PM EDT by drop_zone]
Go to www.falfiles.com and post this. Somebody might help. Lucky bastard you live in CO. I used to line in Denver and work at Stapleton


Link Posted: 12/24/2005 10:43:51 PM EDT
Check the top edge of the locking pin/shoulder.

If needed, take a stone and break the edge if it's sharp (don't take down the front flat face, just the very top edge to allow the bolt to cam down past it without binding).
Link Posted: 12/25/2005 8:09:30 PM EDT

Originally Posted By Dano523:
Check the top edge of the locking pin/shoulder.

If needed, take a stone and break the edge if it's sharp (don't take down the front flat face, just the very top edge to allow the bolt to cam down past it without binding).



What exactly is that part? Is it part of the bolt? Thank you!
Link Posted: 12/25/2005 9:22:21 PM EDT
I can't send you photo direct threw the New Email system. IM me with a Email address and I will shot a photo of the part/edge that you need to stone.

Or If you are close to Denver, I'm in town for the next two days if you just want to hook up at my house.
Top Top