Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/9/2006 8:25:08 AM EDT
[Last Edit: 3/9/2006 8:31:13 AM EDT by twonami]
The gun is entirely assembled but I got a left over part.
It's a pin about 1/4" long with a small head.
Dosen't go in the barrel band or trigger group.
I hate it when this happens.......HELP!
ETA: I bought a replacement spring kit from Wolff that consists of 4 springs, for $16 I figured why not.
Ejector spring
Extractor spring
Hammer spring
Recoil/main spring
Link Posted: 3/9/2006 8:29:08 AM EDT
[Last Edit: 3/9/2006 8:30:48 AM EDT by ar-wrench]
Pic?


Lower band pin perhaps?
Link Posted: 3/9/2006 8:31:01 AM EDT
[Last Edit: 3/9/2006 8:34:01 AM EDT by NovaHokie9]
extractor spring plunger. I bet the bolt was really easy to put back together...

surplusrifle.com or odcmp.com---> both have very detailed directions on assembly/disassembly

Link Posted: 3/9/2006 8:31:54 AM EDT

Originally Posted By ar-wrench:
Pic?


Lower band pin perhaps?


nope
Link Posted: 3/9/2006 8:33:29 AM EDT
[Last Edit: 3/9/2006 8:38:15 AM EDT by twonami]

Originally Posted By NovaHokie9:
extractor spring plunger. I bet the bolt was really easy to put back together...


YOU THE MAN!!!!!
Thanks for the rapid response guys.
I love this site
That little pin is easy to miss.
ETA: That bolt did go together really easy without it.
Link Posted: 3/9/2006 12:01:28 PM EDT
becarefull with that Wolf op rod spring.. it may cause problems...
Link Posted: 3/9/2006 12:23:04 PM EDT

Originally Posted By HighPowerShooter:
becarefull with that Wolf op rod spring.. it may cause problems...


what kind?
Link Posted: 3/9/2006 12:46:05 PM EDT
Link Posted: 3/9/2006 1:14:49 PM EDT

Originally Posted By raf:
The Wolff op-rod spring is slightly over-powered. Some people have reported functioning issues when using it. I sometimes wonder if these same people omitted installing the also overpowered hammer spring which is more difficult to install, thus causing the problem that is (maybe) erroneously blamed on the op-rod spring.

Best bet: Install ALL the springs, and test. If there's a problem, remove them and install NIB OEM springs.


I got a gimpy left hand and got all the springs installed.
Hopefully I don't have any probs.
Top Top