User Panel
Originally Posted By evilyoda: https://www.AR15.Com/media/mediaFiles/32554/412A822D-CC5F-48F0-8742-FFC9FC78B393-1431094.jpg View Quote Hellllooooooo nurse. |
|
|
Originally Posted By Bad-Karma: Hellllooooooo nurse. View Quote $39 bucks. Steel. https://sdtacticalarms.com/product/3-lug-muzzle-brake-carbon-steel-black/ |
|
|
|
Originally Posted By evilyoda: https://www.AR15.Com/media/mediaFiles/32554/412A822D-CC5F-48F0-8742-FFC9FC78B393-1431094.jpg View Quote SD Tactical.... Nice! |
|
|
Hello everyone,
just got a used SR9 A2 (euro version) and while trying to find more info found this forum. It's got the reciprocating charging handle and keymod instead of Mlok. Been spending some hours reading through all these pages ! I didn't quite get all the brace stuff at first, now I think I understand. In the Netherlands we also have some similar laws, with my particular Stribog version it means that the folding stock is fixed with a rollpin to keep it from folding. I really like all the mods being done by all of you here, a lot of stuff is hard to get here. Silencers are not permitted here, for instance. I'm saving for an EOTECH, hopefully the green reticle will find it's way to Europe soon. Could any of you advice me on a light? I have a dealer close by who sells Olight, is it considered a good reputation brand? |
|
|
Hi Bob,
Olight is a good brand of light, for sure. Mine stribog also must be with fixed stock due to short barrel (54 cm without stock < 60 cm ) but at least, suppressor are authorized in France! I'm looking for suppressor for 9x19 with thread of M15x100. This is the thread delivered in Europe I assume, instead of 1/2x28 as US.... I don't know if B&T can deliver Rotex with M15x100. Ase Utra doesn't make supressor for pistol.... |
|
|
I would try Stalon of Sweden for a nice suppressor, they look great, thread is M15x1 (must say I measured with tape measure, not calipers)
found this list online: https://www.thefirearmblog.com/blog/2018/03/21/iwa-2018-european-suppressor-overview/ |
|
|
Thanks for link, I didn't know them. However, M15x1 is not available or I don't find...
|
|
|
Originally Posted By DeOtter: https://i.ibb.co/swFGPj7/IMG-20200229-103056.jpg My SR9A3. Steel reinforced mags are coming in tomorrow. I'am planning to replace that ugly stock. Too bad the nice US companies won't ship to Europe View Quote We recently changed out export regs to be more reasonable; you might try contacting those companies to see if they can help you through a distributor |
|
|
@bob_nl: Welkom bij ARFCOM!
Unfortunately, not all our freedoms apply to people in other countries, but some of our more ridiculous restrictions don't, either. For example, where I live in the Philippines when I'm not working here in Saudi Arabia, there is no such thing as a short barreled rifle. Just throw whatever you want on it, if you have one. Unfortunately, as I am a foreigner there, I don't get to own firearms. My wife will have a nice collection, though. We're glad to have you here. An international perspective is a good thing. Proost! |
|
Kick Ass.
Take Names. Repeat As Necessary. |
Is is even worth it to buy the Gen 2 Stribog or should I wait for the roller delayed model? Found them in stock for $659 delivered for the no brace model... Side note, I've never shot a blowback PCC but it would be suppressed 99.9% of the time.
|
|
Have Bill call me
Award: OFFICIAL 24/365 Catcher Award: 24/365's most likely to object to the taste, and the texture. STD free since '93 |
|
Originally Posted By jasonTTKA: Is is even worth it to buy the Gen 2 Stribog or should I wait for the roller delayed model? Found them in stock for $659 delivered for the no brace model... Side note, I've never shot a blowback PCC but it would be suppressed 99.9% of the time. View Quote im wainting |
|
|
dang real euroXXXX hours in here
|
|
|
|
Originally Posted By DeOtter: https://i.ibb.co/swFGPj7/IMG-20200229-103056.jpg My SR9A3. Steel reinforced mags are coming in tomorrow. I'am planning to replace that ugly stock. Too bad the nice US companies won't ship to Europe View Quote You say ugly. I like the stock. I think it looks good. It's different that what we have here. |
|
Prop 87 WARNING: The state of California contains politicians known to citizens to cause subjugation and/or infringement upon their rights, and injustice or other harm to their liberty.
|
Originally Posted By Getnlwr: You say ugly. I like the stock. I think it looks good. It's different that what we have here. View Quote Lets settle at different then ;) I think the used material for the stock doesn't live up to the finish of the actual firearm. Also it is not adjustable in any way. I'm looking for a nice ACR or Zhukov stock. I think both looks great on the bog. |
|
|
Originally Posted By DeOtter: https://i.ibb.co/q5ZnShH/IMG-20200528-111203.jpg https://i.ibb.co/Ss7z5WR/IMG-20200528-111311.jpg https://i.ibb.co/Hrkd82d/IMG-20200528-111507.jpg https://i.ibb.co/Pr1KhSN/IMG-20200528-112741.jpg New mags are in! Quality of the plastic used is much better. This applies to the case and follower. That red follower looks cool tho. Also the steel reinforced mags fall free easily, thats not the case with the all plastic 30 round mags. Can't wait to try them on the range. But I'm afraid we have to keep the range closed until further notice from our government. View Quote Now if we could just get them in over here.... |
|
|
Originally Posted By anthony20031: Now if we could just get them in over here.... View Quote View All Quotes View All Quotes Originally Posted By anthony20031: Originally Posted By DeOtter: https://i.ibb.co/q5ZnShH/IMG-20200528-111203.jpg https://i.ibb.co/Ss7z5WR/IMG-20200528-111311.jpg https://i.ibb.co/Hrkd82d/IMG-20200528-111507.jpg https://i.ibb.co/Pr1KhSN/IMG-20200528-112741.jpg New mags are in! Quality of the plastic used is much better. This applies to the case and follower. That red follower looks cool tho. Also the steel reinforced mags fall free easily, thats not the case with the all plastic 30 round mags. Can't wait to try them on the range. But I'm afraid we have to keep the range closed until further notice from our government. Now if we could just get them in over here.... ....and they fix the followers. From Facebook. Attached File |
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
Originally Posted By HK_DUDE: ....and they fix the followers. From Facebook. https://www.AR15.Com/media/mediaFiles/3591/Screenshot_20200528-092041_Facebook_jpg-1435905.JPG View Quote What group is that in? Was trying to find it to read the comments. |
|
|
|
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
Hopefully they fix that follower problem before they bring them to the US.
I wonder if you can use the follower from the first gen mag. I also think I'm missing something regarding the reason for the follower replacement. Most of the previous gen mag issues had to do with the feed lips and base plates right? Why did they feel the need to replace the original follower? ETA: Just enlarged DeOtter's side by side photo of the followers and they don't look backwards compatible. |
|
ig @whiskey__actual
"You can tell we won the war. There's pizza huts here, wifi and dick drawings on everything." -me |
Originally Posted By GHOS7: Hopefully they fix that follower problem before they bring them to the US. I wonder if you can use the follower from the first gen mag. I also think I'm missing something regarding the reason for the follower replacement. Most of the previous gen mag issues had to do with the feed lips and base plates right? Why did they feel the need to replace the original follower? ETA: Just enlarged DeOtter's side by side photo of the followers and they don't look backwards compatible. View Quote Awesome. Looks like they cant solve the mag issues. Was going to say maybe we could swap the followers. |
|
|
Originally Posted By icura: The part in bold is your problem^ I bought 1k of that ammo years ago and basically never touched it after my first range session...such a frustrating experience with freedom remans. View Quote It definitely explains the issue with the loose crimps, but as it turns out, the FTFs are another story entirely: my Stribog is unseating magazines while firing! After trying numerous types of ammo in it this past weekend, I discovered that every time it fails to feed or outright jams, I can grab the magazine and pull it free without hitting the magazine release. Here's a video of it demonstrated with snap caps: https://drive.google.com/file/d/1u-s-S8f1y7b3rBYx7K964RpUzAbKytGC/view?usp=sharing It happens with all 4 of my magazines, so I'm thinking it's not a magazine issue. Global Ordnance is sending me another recoil spring to try; I'll post an update after I receive that. |
|
|
I ran another 150 rounds through my stribog yesterday. Overall real good, but 2 failures.
It is the same failure as always. I used to call them stovepipes, but it is a bit of a modified stovepipe. The empty extracts but doesn't fully eject. The bolt tries to load a new round, but smashes the empty in between the bolt and the ejection port. Crunches the shit out of the case mouth of the empty. One even wedged a piece of the open end of the brass in the tiny space between the exterior of the barrel and the inside of the receiver wall. I had to bend the case back and fourth until it snapped off. It was no big deal. I will change to the lighter recoil spring next week and see if those failures go away. Still love it. |
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
@DeOtter : nice to have ! what is the price on your side for the metal mag? here in France it's announced to 40 € each 30 rounds.
The gunsmith should have them in few days. If they drop freely , that's nice... You can come to France to try them, Shooting range opened the 18th of May, 2 of june for mine... |
|
|
|
Originally Posted By DeOtter: https://i.ibb.co/q5ZnShH/IMG-20200528-111203.jpg https://i.ibb.co/Ss7z5WR/IMG-20200528-111311.jpg https://i.ibb.co/Hrkd82d/IMG-20200528-111507.jpg https://i.ibb.co/Pr1KhSN/IMG-20200528-112741.jpg New mags are in! Quality of the plastic used is much better. This applies to the case and follower. That red follower looks cool tho. Also the steel reinforced mags fall free easily, thats not the case with the all plastic 30 round mags. Can't wait to try them on the range. But I'm afraid we have to keep the range closed until further notice from our government. View Quote Thanks for the pictures. My range is open, so you could send them to me and I’ll try them out for you |
|
Those who beat swords into plowshares usually end up plowing for those who don't. --Benjamin Franklin.
|
Originally Posted By CTomas: Originally Posted By jasonTTKA: Is is even worth it to buy the Gen 2 Stribog or should I wait for the roller delayed model? Found them in stock for $659 delivered for the no brace model... Side note, I've never shot a blowback PCC but it would be suppressed 99.9% of the time. im wainting Im waiting. Also will be suppressed full time. |
|
|
Finally cleaned my Stribog. While I was as it. I also replaced the super heavy spring with the new lighter one.
Hopefully that will eliminate my 1 failure to fully eject that I was getting about 1 every other mag. Should be able to get out again this week. |
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
Originally Posted By HK_DUDE: Finally cleaned my Stribog. While I was as it. I also replaced the auper heavy spring with the new lighter one. Hopefully that will eliminate my 1 failure to fully eject that I was getting about 1 every other mag. Should be able to het out again this week. View Quote What are you using for a replacement spring and where did you source it? I am thinking that this might be my issue suppressed FTF so was curious how people are doing with spring weights and where they are getting them. |
|
|
Originally Posted By kaijie: What are you using for a replacement spring and where did you source it? I am thinking that this might be my issue suppressed FTF so was curious how people are doing with spring weights and where they are getting them. View Quote View All Quotes View All Quotes Originally Posted By kaijie: Originally Posted By HK_DUDE: Finally cleaned my Stribog. While I was as it. I also replaced the auper heavy spring with the new lighter one. Hopefully that will eliminate my 1 failure to fully eject that I was getting about 1 every other mag. Should be able to het out again this week. What are you using for a replacement spring and where did you source it? I am thinking that this might be my issue suppressed FTF so was curious how people are doing with spring weights and where they are getting them. I believe it was right from Global. It is an updated lighter factory spring that they were sending out to those that were having issues. |
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
|
Originally Posted By N_Parker: Jaroslav just posted this to the Facebook page. https://imagizer.imageshack.com/v2/1024x768q90/922/KC49F4.jpg View Quote I like what I’m seeing, but was the mag type ever confirmed? |
|
|
Originally Posted By N_Parker: Jaroslav just posted this to the Facebook page. https://imagizer.imageshack.com/v2/1024x768q90/922/KC49F4.jpg View Quote Sure hope those arent for glock mags |
|
|
The magwells look as though they are factory Stribog mags.
|
|
O.K....I sold all my HKs, but I have to keep my Identity!
|
7.62 Tokarev chambered Stribog-
https://www.facebook.com/jaroslav.kuracina/videos/10206506148288909/?t=0 |
|
|
Just saw his post, thrilled about an alloy lower that uses AR grips but not so much when it comes to the caliber.
|
|
|
Originally Posted By DVSFred: https://i296.photobucket.com/albums/mm161/Deviousfred/IMG_6054.jpg https://i296.photobucket.com/albums/mm161/Deviousfred/IMG_6055.jpg https://i296.photobucket.com/albums/mm161/Deviousfred/IMG_6058.jpg https://i296.photobucket.com/albums/mm161/Deviousfred/IMG_6056.jpg View Quote @DVSFred PlanA? |
|
Doesn't mean that much to me to mean that much to you.
|
Still waiting on a colt mag lower before I get one.
|
|
|
Originally Posted By MaxFr: @DeOtter : nice to have ! what is the price on your side for the metal mag? here in France it's announced to 40 € each 30 rounds. The gunsmith should have them in few days. If they drop freely , that's nice... You can come to France to try them, Shooting range opened the 18th of May, 2 of june for mine... View Quote I paid € 37,50 each. They drop very easily, which I like very much. I hope the followers will hold up and the example of the cracked one is just a unique issue. Going to France to test the mags is not an option, as I have to arrange multiple permits to cross borders. And it's a long drive. We are scheduled to open doors to our range at july 1st. In the meantime we have to figure out how to obey COVID regulations. @N_Parker: in Western Europe we pay huge amounts of taxes. And possession of firearms is heavily regulated (at least here in The Netherlands) and discouraged. As for the Stribog: I had to sign up for a specific gun club to be able to own one. So you can imagine that the market for firearms is a very small nichemarket. Everything is distributed in very low numbers so prices are sky rocketing. For example: I paid $1240 for the bog. |
|
|
Originally Posted By DeOtter: I paid € 37,50 each. They drop very easily, which I like very much. I hope the followers will hold up and the example of the cracked one is just a unique issue. Going to France to test the mags is not an option, as I have to arrange multiple permits to cross borders. And it's a long drive. We are scheduled to open doors to our range at july 1st. In the meantime we have to figure out how to obey COVID regulations. @N_Parker: in Western Europe we pay huge amounts of taxes. And possession of firearms is heavily regulated (at least here in The Netherlands) and discouraged. As for the Stribog: I had to sign up for a specific gun club to be able to own one. So you can imagine that the market for firearms is a very small nichemarket. Everything is distributed in very low numbers so prices are sky rocketing. For example: I paid $1240 for the bog. View Quote America may not look like the best right now, but have you considered moving? Our rural areas are pretty peaceful |
|
|
|
Originally Posted By MAKAK47: America may not look like the best right now, but have you considered moving? Our rural areas are pretty peaceful View Quote I have been a couple of times in the USA. Last year I visited the south west. I have been dreaming about it, but never seriously considered to move. Maybe someday it will happen :) But for now I have to deal with the extensive Dutch restrictions and regulations. Europeans just do not have the urge to own firearms as you guys do. I am frowned upon when telling someone I shoot guns |
|
|
Kick Ass.
Take Names. Repeat As Necessary. |
The 10mm P40L is a very nice pistol.
Really fills my hand. |
|
|
Originally Posted By MAKAK47: America may not look like the best right now, but have you considered moving? Our rural areas are pretty peaceful View Quote View All Quotes View All Quotes Originally Posted By MAKAK47: Originally Posted By DeOtter: I paid € 37,50 each. They drop very easily, which I like very much. I hope the followers will hold up and the example of the cracked one is just a unique issue. Going to France to test the mags is not an option, as I have to arrange multiple permits to cross borders. And it's a long drive. We are scheduled to open doors to our range at july 1st. In the meantime we have to figure out how to obey COVID regulations. @N_Parker: in Western Europe we pay huge amounts of taxes. And possession of firearms is heavily regulated (at least here in The Netherlands) and discouraged. As for the Stribog: I had to sign up for a specific gun club to be able to own one. So you can imagine that the market for firearms is a very small nichemarket. Everything is distributed in very low numbers so prices are sky rocketing. For example: I paid $1240 for the bog. America may not look like the best right now, but have you considered moving? Our rural areas are pretty peaceful So..taking it into your back yard and capping off a 30 round magazine is frowned on? |
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.