User Panel
Originally Posted By -GuNuT-:
So just how BAD are the mags, really? I was planning on buying one of these but I don't want to drop the cash if the mags are that shitty. View Quote I like the factory mags A LOT! I'm not switching over, to Glock mags! I've not heard anyone bash B&T GHM9/APC/---- mags. |
|
Whoever appeals to the law against his fellow man is either a fool or a coward. Whoever cannot take care of himself without that law is both.
|
Originally Posted By -GuNuT-:
So just how BAD are the mags, really? I was planning on buying one of these but I don't want to drop the cash if the mags are that shitty. View Quote Also, most modern 9mm mags will be slightly curved to feed more reliably with tapered 9mm ammo. But, I've never heard of folks complaining about feed issues with any B&T gun. So, a couple of theoretical issues, but in my experience, my B&T is rock solid. Don't worry. It's probably just the Scorpion owning haters . |
|
|
There was a single thread a few weeks ago where the OP reported dropping a loaded magazine and the floor plate cracked. They contacted B&T it was taken care of free of charge. That was the extent of it.
I’ve had B&T firearms for 5 years and have never personally had a magazine break. |
|
Elections Have Consequences
|
A buddy that was shooting my APC9 hit the mag release by accident and the loaded mag hit the concrete and the base plate cracked. B&T sent me a replacement mag no charge ASAP.
LOVE both of my B&T's but I do believe the mags are kind of on the cheap side but that's me. |
|
|
duplicate post
|
|
|
Originally Posted By bestiller:
There was a single thread a few weeks ago where the OP reported dropping a loaded magazine and the floor plate cracked. They contacted B&T it was taken care of free of charge. That was the extent of it. I’ve had B&T firearms for 5 years and have never personally had a magazine break. View Quote i bought some bumper pads since and i think if i would have had one installed it would have saved the floor plate. they look like shit tho. |
|
|
Originally Posted By humahuma:
i think that was me. i dropped a loaded mag and broke one of the two clips on the floor plate. it was taken care of by B&T. i bought some bumper pads since and i think if i would have had one installed it would have saved the floor plate. they look like shit tho. View Quote ROCK6 |
|
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants" - Thomas Jefferson
|
|
Originally Posted By smiller4169: Gen 2 has a removable rail, if you look close in my pic you’ll see the split. That’s really the only way to tell. Also under the side picatinny rails there is MLOK on the Gen 2 but not in the Gen 1. Some Gen 2 have only a Trilug, so confirm before you order it if you want a trilug and threaded one. The shop I got mine from had both, a tri-lug only and a trilug with threads, so I chose to have both. View Quote |
|
|
Originally Posted By blacked0ut: ^^This. I wanted threaded and assumed I was getting one. Ordered from online and when I went to pick it up it was 3-lug only. Trying to fix this mistake has been a nightmare. If only it was as simple as buying another can. It's only money right? View Quote |
|
|
Originally Posted By humahuma: sorry, its on a apc9. if you look in the apc9 thread you will see it on some GHM9s. http://i66.tinypic.com/346as8g.jpg View Quote ROCK6 |
|
"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants" - Thomas Jefferson
|
Hello All,
I've been lurking on this thread for a while; thought I would say hello. I purchased a GHM-9 full size from Tar Heel the 3rd week of December and just got the opportunity to shoot it this past weekend. 1st of all, this is a 2ND GENERATION gun and it came with a 3 LUG + 1/2x28 threaded barrel. I ran the gun both unsuppressed and suppressed using a Thompson Machine Isis II 9mm can. It was very acceptably suppressed and didn't seem "gassy" at all. The thread protector did start to work itself loose, I am going to use the O-Ring mentioned earlier in this thread...hopefully that helps. 100 rounds 115-grain WWB with zero malfunctions. A couple of thoughts: Initially, I thought the right side controls (for lefties) would be problematic, as they dug into my hand while dry handling. While actually firing it was a non-issue. I have a Form 1 filed to SBR this gun. An SOT friend of mine brought his Gen 1 gun with the B&T stock affixed (nice not having to wait...lucky guy). The ergonomics of this gun with the stock are phenomenal. I won't even fire the gun again until I get my tax stamp and attach a stock. I did run into a problem based on my newness to the weapon. I probably mashed the slide release 4 times before I realized it wasn't the magazine release. Practice will solve this problem :-) Thanks to everyone for the informative and high level of discourse on this thread, it really helped me make what wound up being a great decision! GHEN |
|
|
Originally Posted By blacked0ut: ^^This. I wanted threaded and assumed I was getting one. Ordered from online and when I went to pick it up it was 3-lug only. Trying to fix this mistake has been a nightmare. If only it was as simple as buying another can. It's only money right? View Quote Good Luck, GHEN |
|
|
One year and this thread is still going! I meant to post this a few days ago. Thanks for all the interest!
|
|
NRA life member
U.S. Navy veteran New Mexico State University 2013 "Some aim to please, I shoot to kill" |
Originally Posted By scarshooter:
One year and this thread is still going! I meant to post this a few days ago. Thanks for all the interest! View Quote View All Quotes View All Quotes Originally Posted By scarshooter:
One year and this thread is still going! I meant to post this a few days ago. Thanks for all the interest! Originally Posted By scarshooter:
1. Has anybody Form 1'd it yet? 2. Are you running a red dot on it? If so, which one? 3. What height of mount are you using with the red dot and what sight picture is your set up giving you? 4. Are you using the factory sights to co-witness or another brand? GHEN |
|
|
Originally Posted By GHEN: This probably isn't the answer you are looking for but worst-case scenario B&T is supposed to offer barrels for sale sometime this year. You might be able to sell the barrel you don't want to ameliorate the expense. Good Luck, GHEN View Quote |
|
|
Anyone have the issue of getting malfunctions when there's only a few rounds in the mag? Only happens when there's 1-3 rounds left.
|
|
|
|
|
Originally Posted By Wulfp3ngwin:
YES. 3 rounds left, always get a failure to feed. 4 different magazines. No idea what the problem is. View Quote View All Quotes View All Quotes Originally Posted By Wulfp3ngwin:
Originally Posted By CrimsonTideShooter:
Anyone have the issue of getting malfunctions when there's only a few rounds in the mag? Only happens when there's 1-3 rounds left. |
|
|
Originally Posted By mak0: Sounds like weak mag springs. Try hotter ammo and see if it helps. It could be the ammo is not cycling the bolt 100% rearward and it's returning too fast for the mag to raise the next round fully before it starts to feed. View Quote Might be ammo related. Weird that the issue would only present itself at that point in the magazine if it is ammo. I had only wiped the gun down and applied some lube before that range trip. I have now field stripped, cleaned and lubed it. Next range trip I will try some different ammo and report back. |
|
|
Originally Posted By CrimsonTideShooter:
Anyone have the issue of getting malfunctions when there's only a few rounds in the mag? Only happens when there's 1-3 rounds left. View Quote |
|
Elections Have Consequences
|
Originally Posted By bestiller: If you’re shooting from a bench, any chance that you’re resting the weight of the gun on the magazine when you shoot? Or does it occur in any position? View Quote I have a second GHM9 so I can test to see if it happens with the same mags/ammo. Hopefully that'll help troubleshoot. |
|
|
Originally Posted By CrimsonTideShooter:
Anyone have the issue of getting malfunctions when there's only a few rounds in the mag? Only happens when there's 1-3 rounds left. View Quote |
|
|
Originally Posted By CrimsonTideShooter:
Anyone have the issue of getting malfunctions when there's only a few rounds in the mag? Only happens when there's 1-3 rounds left. View Quote |
|
Whoever appeals to the law against his fellow man is either a fool or a coward. Whoever cannot take care of himself without that law is both.
|
So i have a question about the trigger. I know they're sort of compatible with AR triggers, at least some. Has anyone tried just swapping out springs? I like the break and pseudo two stage feel on mine, but it's just a little too heavy overall imo. Broke at about 7.5-8lbs on my gauge.
I was thinking something like the JP reduced power springs might work? I'll have to remove the FCG sometime and see how close it is to an AR trigger group. |
|
|
Been really looking hard at getting the gen2 of one of these in a standard configuration. This looks like a decent deal with the brace. Been trying to talk myself out of it but this thread isn't helping. https://tarheelstatefirearms.com/store/index.php?route=product/product&path=17_122&product_id=460
|
|
|
Originally Posted By gee0111:
Been really looking hard at getting the gen2 of one of these in a standard configuration. This looks like a decent deal with the brace. Been trying to talk myself out of it but this thread isn't helping. https://tarheelstatefirearms.com/store/index.php?route=product/product&path=17_122&product_id=460 View Quote |
|
|
Originally Posted By OAK667: https://www.AR15.Com/media/mediaFiles/483906/CBB4979F-C28B-4413-A4DD-03C0AAF2DB6C-781591.jpg I have NicTaylor00 reduced powder hammer and trigger springs. I did test a Geisslle SSA and a Sig Duo Lite trigger in my GHM9, they all worked well. View Quote |
|
|
So...based on all the positive reviews of Rainier Arms - I gave them a shot and ordered the GHM9 Gen 2 Compact... have to say I'm extremely dissatisfied. They sent me the Gen 1 full size... even has a sticker on the case showing that the order was "reviewed" before being sent out. Now I have to wait for them to open and hopefully they will own up and make it right. And yes, the invoice and order clearly states GHM9c Gen2...the sku on the B&T box is of the gen 1 and doesn't match the invoice either for the gen2c.
Feel like I should have gone with THSF in hind site.. guess we'll see what happens. Hoping they call me back today. |
|
|
Originally Posted By americaninfidel007:
So...based on all the positive reviews of Rainier Arms - I gave them a shot and ordered the GHM9 Gen 2 Compact... have to say I'm extremely dissatisfied. They sent me the Gen 1 full size... even has a sticker on the case showing that the order was "reviewed" before being sent out. Now I have to wait for them to open and hopefully they will own up and make it right. And yes, the invoice and order clearly states GHM9c Gen2...the sku on the B&T box is of the gen 1 and doesn't match the invoice either for the gen2c. Feel like I should have gone with THSF in hind site.. guess we'll see what happens. Hoping they call me back today. View Quote At any rate, i bought mine from THSF and the experience was pretty great as others have echoed. |
|
|
I jumped on the bandwagon and bought the GHM9 regular size from HollowTrail Aromory. Waiting for it to ship. I can’t wait. They give a Mil/LE discount of 10% on weapon and mags. I have a full auto Colt 6991 and simi auto MPX. Now this B&T. So pumped up to get this. Thanks to all the posters about the gun.
|
|
|
I just got the return form to send it back - I had picked it up at the LGS with my 2 year old son and so I hadn't checked it out until I got home. Turned around and took it back, seems like they are going to ship out the correct item today to exchange it. Fingers crossed no issues this time around.
|
|
|
Super APC arrived today.
I’ll post up the findings as soon as I get to the range. I may do 2 separate posts, one for the dimensions and weight, and then one for ammo testing. I’m going to be measuring and testing in a GHM9 Gen 2 OEM vs: Geissele Super APC Geissele SD3G Geissele SSA Geissele SSA-E BCM PNT And just for the sake of testing I might put the Super APC in an AR and shoot it too |
|
|
Initial impression of the Super APC, it feels identical to the SD3G Trigger.
The instructions say it comes with two different trigger springs but it didn’t. Instructions also said that the hammer pin only had one groove and to insert it a certain direction, but both pins had two grooves. The Super APC Trigger does away with a free moving safety when the gun is not charged. You can only put it in safe when charged just like an AR. I’ll post more when I make the measurement tables and photos. |
|
|
Originally Posted By Alexbrooks:
I jumped on the bandwagon and bought the GHM9 regular size from HollowTrail Aromory. Waiting for it to ship. I can’t wait. They give a Mil/LE discount of 10% on weapon and mags. I have a full auto Colt 6991 and simi auto MPX. Now this B&T. So pumped up to get this. Thanks to all the posters about the gun. View Quote |
|
"Goodnight Chesty wherever you are."
|
Originally Posted By shad951:
Is that listed on their website? I could not find a discount link. View Quote View All Quotes View All Quotes Originally Posted By shad951:
Originally Posted By Alexbrooks:
I jumped on the bandwagon and bought the GHM9 regular size from HollowTrail Aromory. Waiting for it to ship. I can’t wait. They give a Mil/LE discount of 10% on weapon and mags. I have a full auto Colt 6991 and simi auto MPX. Now this B&T. So pumped up to get this. Thanks to all the posters about the gun. |
|
|
"Goodnight Chesty wherever you are."
|
Does anyone else have issues when using the mag clamp? When there is a mag on the ejection port side I have about 1 round a mag not eject properly and get wedged between the mag and the bolt.
|
|
|
Originally Posted By CrimsonTideShooter:
Anyone have the issue of getting malfunctions when there's only a few rounds in the mag? Only happens when there's 1-3 rounds left. View Quote It was repeatable until I pulled down on the mag as I was firing. When I’d pull down on it, it would function fine. |
|
|
Happiness is receiving your first B&T...a brand new GHM9.
Sadness is realizing that you received a gen 1 and now you have to wait to get it swapped out. Dammit. ETA: Well, I just learned something (maybe you all already knew). There are a bunch of gen 1 guns out there that have the newer feedlips to accommodate hollowpoint ammo. That's what I got. |
|
This is not the hammermill you're looking for.
Your rights are only guaranteed to the extent you're willing to defend them from tyranny. |
I have a Giselle super apc in apc 223, a shooting sight trigger in apc 9, and elfman 308 trigger in my apc 45; they all work. FYI
|
|
You don't understand, them boys killed my dog!
|
Joined the club last night, it's a gen 1 but the dealer sent it in for the feed ramp fix. Doesnt look like it was shot much if at all, got it for under 1k.
Pic next to my MPX SBR. Going to file a form 1 today for the GHM, will I be able to run this stock? B&T folding stock the description says Gen 2 only. In the meantime I'm looking to add a brace. I have an extra tailhook mod 1, anyone running one with the Dakota tactical folding adapter? Looks nice |
|
|
Originally Posted By pjomalley:
I have a Giselle super apc in apc 223, a shooting sight trigger in apc 9, and elfman 308 trigger in my apc 45; they all work. FYI View Quote |
|
|
Edit: Found the answer.
|
|
|
Originally Posted By grn_zx6r:
Going to file a form 1 today for the GHM, will I be able to run this stock? B&T folding stock the description says Gen 2 only. View Quote GHEN |
|
|
Originally Posted By GHEN:
Great thread! Can you now answer your original questions? Did you wind up with an SBR? What about the other questions? I for one could use the insight. GHEN View Quote View All Quotes View All Quotes Originally Posted By GHEN:
Originally Posted By scarshooter:
One year and this thread is still going! I meant to post this a few days ago. Thanks for all the interest! Originally Posted By scarshooter:
1. Has anybody Form 1'd it yet? 2. Are you running a red dot on it? If so, which one? 3. What height of mount are you using with the red dot and what sight picture is your set up giving you? 4. Are you using the factory sights to co-witness or another brand? GHEN 1. I have not form 1'd it. 2. I am using an Aimpoint H1, the T1's are just a little too spendy. 3. I am using an low LaRue Tactical mount with mine. 4. I am not using any factory sights. I ditched them. |
|
NRA life member
U.S. Navy veteran New Mexico State University 2013 "Some aim to please, I shoot to kill" |
finally got the correct GHM9Compact...threw on the collapsable brace (tail hook mod 1), scalar mount w/ T2, and the B&T jet funnel! going to be taking it out today to see how it shoots and get it sighted in. Waiting for the HBI right safety delete and lighter safety springs to arrive then I'll swap those out.
The brace is solid and definitely don't see myself SBR'ing it. Only thing I'm considering yet is the Geissele super APC trigger, hopefully today's time behind the gun will make that decision for me. From dry firing, seems like an unnecessarily heavy trigger. I have the SSP 3.5# in one of my ARs and its great. Guessing if I do the G super APC route I'll probably go with the 2.75# spring. Have a question related to the trigger - I know the super APC changes the "location" of the trigger, any thoughts on simply using the Geissele hammer & trigger springs from the trigger set to replace the springs on the original B&T trigger? Would this maintain the trigger position while also reducing the pull to the 2.75#? |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.