Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 9/6/2010 2:40:19 PM EDT
I have an M4 1000, every three or four shots it losens up, I believe some one here was having the same problem but i can't find the topic. I'm going to call AAC and see what can be done, just wondering if anyone here has a suggestion. I'm afraid if i forget to check it i'll blow a hole through the front. Plus it gets seriously hot after a few rounds
Link Posted: 9/6/2010 2:49:11 PM EDT
[Last Edit: 9/6/2010 2:52:24 PM EDT by HAUK3]
Finally got some 556 through it? They get hot real fast when you are not shooting .22.
Is the mount coming loose, or is it the can?
Link Posted: 9/6/2010 2:53:35 PM EDT
When you say loosens up- as in it backs off a tooth? Or it can wiggle between the 2 teeth? Since it is a 18t mount- there is some wiggle room there. If it is the movement between the 2 teeth- you are good. If it is able to move another notch- trouble.
Link Posted: 9/6/2010 3:23:41 PM EDT
i tighten it up fire a couple of rounds and it backs off, it stays between the teeth but im afraid if i keep shooting it will keep backing off more teeth and i will get a strike, plus it gets lose enough to where i shake the gun and the can rattles back and forth a little. like i said i'm worried if i where to shoot a full mag it would keep going.
Link Posted: 9/6/2010 3:26:06 PM EDT
[Last Edit: 9/6/2010 3:26:46 PM EDT by EXMARINE41]
i know hauk3 i should of got the m4 2000
Link Posted: 9/6/2010 4:05:01 PM EDT
hhhhhhhhhhhhhhhhhhhhhhhh
Link Posted: 9/6/2010 4:47:29 PM EDT
If you get with AAC let us know what they say
Link Posted: 9/6/2010 6:20:57 PM EDT
Call aac. They can work with you on resolving the issue.
Link Posted: 9/7/2010 4:03:01 PM EDT
The AAC M4-1000 will back off at least one tooth.
Link Posted: 9/7/2010 6:06:45 PM EDT
thats what AAC told me, as long as it doesnt keep going its normal. it still bothers me but i guess i'll have to deal with it
Top Top