Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/2/2006 4:57:12 PM EDT
[Last Edit: 1/2/2006 4:57:12 PM EDT by 1GUNRUNNER]
Trying to sort out some problems for an acquaintance, but the slide lock lever is so tight I'm afraid I'll break or mar something trying to strip the gun. Can somebody tell me (or link to instructions for) disassembly of this weapon?

Thanks.
Link Posted: 1/2/2006 4:45:52 PM EDT
Get yourself an oxy-acetylene torch, some pliers, a hammer, and a bucket of water.

The rest should be self explanatory.



Link Posted: 1/2/2006 4:46:06 PM EDT
[Last Edit: 1/2/2006 4:50:10 PM EDT by SGB]
Link Posted: 1/2/2006 4:46:14 PM EDT
If it is like my 5906, make SURE the GUN is EMPTY, mag out. Pull the slide back and push the slide stop from the right side. You might need a ball point pin to help push, The slide must be back far enough to release the stop, there is a cut in the slide (left side) to help it's removal
Link Posted: 1/2/2006 4:50:53 PM EDT
Link Posted: 1/2/2006 4:54:20 PM EDT
I use the end of a mag.

BTW great gun.
Link Posted: 1/2/2006 5:02:57 PM EDT

Originally Posted By Zack3g:
Get yourself an oxy-acetylene torch, some pliers, a hammer, and a bucket of water.

The rest should be self explanatory.






Zack you took the words right out of my head!!!!, or alternatively; just shoot it, it will come apart on it's own!
Link Posted: 1/2/2006 8:28:51 PM EDT
Thanks. The problem was that the slide lock lever lines up & pulls out from the "wrong" (front) end.
Top Top