Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 7/3/2003 3:32:05 PM EDT
I remember about a year or two ago someone had posted a tutorial on how to reapply the paint on a rifle's fire selector (if the makes sense).

My problem is some of the red paint has come off, and i was wondering if anyone had any advice on how to touch up the paint or reapply it.
Link Posted: 7/3/2003 3:56:57 PM EDT
Paint looks good to me, on that rifle.
Link Posted: 7/3/2003 4:15:31 PM EDT
That's not mine, but i was just using that image to try and better explain what i meant...
Link Posted: 7/3/2003 4:37:13 PM EDT
Use testers model paint.

Using a small brush, get the paint into the letters/indents (don't worry about getting paint on the surounding flats) and let the paint sit for a few minutes to start drying. Once it begins to dry, you can use a Q-tip/cloth wet with gun oil to get paint off everything that is outside of the groves/indents.
Link Posted: 7/3/2003 6:33:20 PM EDT
Thanks for the help.
Link Posted: 7/3/2003 9:26:17 PM EDT
Take a dab of paint on the end of a tooth pick, and draw it into the lines on the lower. I've done that, with great success, on some very detailed models I used to build. If you can 'frey' the end of the tooth pick slightly, all the better. It sorta acts like a brush that way.
Top Top