Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Site Notices
3/20/2017 5:03:23 PM
Posted: 6/13/2002 8:58:25 PM EDT
I have a 70 series govenment model and I want to swap the hammer and trigger and I was wondering how much work is involved it really doesn't look like that much to take them out but I am wondering how much "fitting" is involved,
thanks, and does anyone reccomend a hammer and trigger to make the job as easy as possible?
oh yeah I don't want to cut up the gun I would rather just cut the parts so if I ever want to put it back as original thats a option.
Link Posted: 6/13/2002 9:43:54 PM EDT
What you really want is a prepped hammer/sear set. The trigger really has little effect as far as trigger pull and crispness is concerned. If you don't already have one, a book on gunsmithing for the 1911 .45 will come in real handy when you start working on your pistol. Here's a site for the Hammer/Sear Set.

coyote3
Link Posted: 6/13/2002 11:13:28 PM EDT
Link Posted: 6/14/2002 4:23:27 AM EDT
Changing out all the trigger parts is simple as pie.

I agree with the others, get a prepped 'drop in' set.

After changing these parts you MUST perform all the safety checks. There is a grip safety test, thumb safety test and a disconnector test that must be performed. Look these up in a book, its too lengthy to post them all here.
Link Posted: 6/14/2002 5:33:12 AM EDT
I'd go with the C&S drop in set as well. Quality stuff.
Top Top