Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 6/12/2002 5:55:04 PM EDT
OK I changed out my trigger from stock to a Jewell tonite. I think I have the first and second stages adjusted to suit me. I'll need to shoot it some before I make any more adjustments.

One question though. That 'screwdriver' looking tool was useless, couldn't use it for any adjustments. I had an allen wrench that worked for the large screw (second stage) but I wonder what size the 2 small ones are [:\]

The 'hook' thingy was OK for moving the first stage spring around though...
Link Posted: 6/12/2002 6:03:42 PM EDT
[Last Edit: 6/12/2002 6:04:49 PM EDT by Pthfndr]
The small one is 1/16". Here are some better instructions than the ones that come with the trigger.
www.highpowerrifle.com/Jewell.htm
Link Posted: 6/12/2002 6:56:47 PM EDT
Thanks, after reading the supplemental instructions I realize I installed the trigger spring wrong - I put the L shaped leg on the adjustment plate, its supposed to be under the trigger rivet....OPPS!
Top Top