Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/28/2002 3:29:32 PM EDT
Yes I know a silencer will have the ATF knocking on the door with handcuffs, but is
there a way to have a muzzle brake but not the
extra noise ? Most muzzle brakes deflect the
gasses (explosion) back toward the shooter,
why can't the gasses be aimed away from the shooter ?
Link Posted: 3/28/2002 3:48:18 PM EDT
[Last Edit: 3/28/2002 3:49:47 PM EDT by AR15FENCER]
well, with a brake, it blows the gasses either at about a 90 degree angle from the muzzle, or back at an angle. If you diverted the gas any more forward than 90 degrees, it wouldn't reduce recoil, would it?

What I think might work tho, is cut a hole in a board, and stick your muzzle through that. Thus the sound comes back and is deflected off of the board. :)

M@
Link Posted: 3/28/2002 4:02:56 PM EDT
Check out Tapco, they sell a bunch of sleeves for M-brakes that are supposed to allow gas to vent in the right place to reduce recoil.
Link Posted: 3/28/2002 4:08:26 PM EDT

Originally Posted By AR15FENCER:
What I think might work tho, is cut a hole in a board, and stick your muzzle through that. Thus the sound comes back and is deflected off of the board. :)

M@



Too phucking phunny!
Link Posted: 3/28/2002 4:53:16 PM EDT
Don't know if this cuts noise, but it deflects the blast up and away from the shooter and bystanders. Just what you need for a 50.

Link Posted: 3/28/2002 5:15:51 PM EDT
Link Posted: 3/28/2002 6:04:32 PM EDT
Hehe, the person who posted it on BH said it weighed something like 160 pounds.
Top Top