Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/15/2003 10:35:45 PM EDT
Is anybody familier with this pistol? I would like to know how to take this pistol apart for cleaning and lube.. Thanks..

-- 400Yards
Link Posted: 10/16/2003 4:23:29 PM EDT
Pretty neat little guns. I have one also. (1)Pull the slide to the rear and lock it in place by pushing the safety up.
(2)Grab both sides of the rear mechanism and turn clockwise. The firing mech. hammer etc will come straight out.
(3)While holding the slide back with one hand release the safety and allow the slide to move forward and off the frame.
(4) If the slide sticks 1/2 way forward when reemoving, a small lever on the trigger is in the way. It will be one the left side of the gun just between the barrel, slide and frame. It might need to be pushed out of the way with a small screwdriver.
(5) Reassembly in reverse.

Be careful not to try and remove the grips. If they are the black rubber they may break due to age.

Good luck Joe
Link Posted: 10/16/2003 4:38:26 PM EDT
Thanks for your help..It really is a neat pistol and it really does come apart easy if you know where to start!

--400Yards
Top Top