User Panel
Originally Posted By JollyMon:
https://i.imgur.com/kSJZ9Rj.jpg View Quote |
|
|
|
His & Hers set I just completed.
LBT 6094’s Midwest Proguard mc4+ Attached File 3 mags, radio and ifak are the only things on it. Weighs in at 24lbs loaded. Matching belts with more med and pistol mags. Attached File |
|
“No sympathy for the devil, Buy the ticket, take the ride...and if it occasionally gets a little heavier than what you had in mind, well...maybe chalk it off to forced conscious expansion"
|
Originally Posted By AMCJ76:
His & Hers set I just completed. LBT 6094’s Midwest Proguard mc4+ https://www.AR15.Com/media/mediaFiles/195843/18EEC2F6-92F8-4F5B-B579-D1BC3753BC1B-689220.JPG 3 mags, radio and ifak are the only things on it. Weighs in at 24lbs loaded. Matching belts with more med and pistol mags. https://www.AR15.Com/media/mediaFiles/195843/CB87C606-EB5A-4336-873B-C7D7BD028DFC-689225.JPG View Quote |
|
|
|
The outer wear carrier is in the garage, empty. The concealable one has the actual armor in it and is out on loan to a young Marine. The extra plate is riding in my son's backpack, backup up by a soft armor panel level IIIA. So, no armor for me right now. When he graduates I'll get the one plate back and might get the night time emergency armor put together again.
Oh, carrier is a Condor from AR500.com, their early set up called Urban Go. |
|
|
|
Originally Posted By schaffer:
Looks like a QLS mounting plate for Safariland holsters View Quote View All Quotes View All Quotes Originally Posted By schaffer:
Originally Posted By LadderLogic: Hey what’s the thingy high on the chest?? Attached File |
|
“No sympathy for the devil, Buy the ticket, take the ride...and if it occasionally gets a little heavier than what you had in mind, well...maybe chalk it off to forced conscious expansion"
|
Originally Posted By AMCJ76: Correct, it allows me to move the pistol to a more accessible place when seated in a vehicle. Makes swapping holsters a snap too. https://www.AR15.Com/media/mediaFiles/195843/266F161C-912C-4D18-BC07-84C06DB6B4A9-690740.JPG View Quote |
|
|
“No sympathy for the devil, Buy the ticket, take the ride...and if it occasionally gets a little heavier than what you had in mind, well...maybe chalk it off to forced conscious expansion"
|
Getting ready to purchase my first PC. Looking at the Velocity Systems Scarab Lt. or the JPC 2.0
Anyone around 6’2 220ish with a barrel chest rocking a size large, or would XL be a better fit? |
|
|
Originally Posted By VeryStableGenius:
Getting ready to purchase my first PC. Looking at the Velocity Systems Scarab Lt. or the JPC 2.0 Anyone around 6’2 220ish with a barrel chest rocking a size large, or would XL be a better fit? View Quote What plates do you have? |
|
Please, call me Joe
Follow me on Instagram! http://instagram.com/tcba_joe/ |
Originally Posted By VeryStableGenius:
Getting ready to purchase my first PC. Looking at the Velocity Systems Scarab Lt. or the JPC 2.0 Anyone around 6’2 220ish with a barrel chest rocking a size large, or would XL be a better fit? View Quote Here’s a pic of me with large plates for reference. Attached File |
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
Originally Posted By DallasLooterShooter: 6’1” 250 here. I think the large SAPI plates are sufficient for coverage of your heart/lungs, but they look small on me. If you want more coverage the XL plates will be a little better. Then you can figure out which carrier you need based on the plates you choose. Pay attention to wait difference between sizes. Here’s a pic of me with large plates for reference. https://www.AR15.Com/media/mediaFiles/108939/4F81D575-6741-4DA1-ACC0-3534730628A8-692607.JPG View Quote |
|
|
Originally Posted By WusteHase:
Here's my current setup. Seen a fair bit of use, and is of course ever-evolving. I'm a Forward Observer (Fister, yut), so the contents of the right side pouch and the MM Hangar are relevant job tools (compass, kestrel, DAGR, CFF/CAS formats shrunk down and laminated, GRG sleeves, protractor, and about 5000 different markers), with a couple pieces of snivel gear (neck gaiter, skull cap, hand warmers), 3rd tourniquet, NVG J-arm, and an assortment of chem lights. Our unit is in the process of issuing out M17s to all the team chiefs and squad leaders, so in the meantime I've got some of my VP9 mags in there as placeholders, and I'm eagerly awaiting the new Safariland holsters that come with em. As we just got pulled back to our parent unit, we had to turn in our MBITRs and 152s, so for volume I've got a couple mags stuff in the front 152 pouch. Normally have the antennas routed along the left cummerbund and up the back. The MBITR on my back has the short whip, so it's pretty well out of the way by itself. On thing I haven't sorted very well is being able to grab my left PTT quickly with the tourniquet hanging there, but it is doable when done deliberately. The Nimravus nestles in pretty nicely behind the front radio and is easily accessible to both hands. The moto patches of course come off when I'm not taking "cool guy" pictures (that AZ flag is IR, so it's pretty damn bright under sensors). One-off Velocity Systems Scarab LT Releasable (though I have an LE front plate bag on the way so I can hook up a Nett Warrior rig from KAG in the near future). Also have the rear zip-on panel en route, to eliminate that second radio pouch and the need to sling my Camelbak when I'm dismounted. Haley Strategic DC3RX W/ the MM Hangar Kilo 727 belt http://i.imgur.com/3dTZ7Dxh.jpg http://i.imgur.com/0Y9Nh7Fh.jpg http://i.imgur.com/fUEKGZll.jpg http://i.imgur.com/RU8wVO3l.jpg http://i.imgur.com/2vpemFCl.jpg View Quote |
|
"America is baffling sometimes, frustrating, we have outsmarted the world in so many ways yet struggle with the little shit." -Swingset
|
"Adding a piston to an AR is like nailing more legs to a dog and calling it an octopus." - Chapman
|
Originally Posted By AMCJ76: Correct, it allows me to move the pistol to a more accessible place when seated in a vehicle. Makes swapping holsters a snap too. https://www.AR15.Com/media/mediaFiles/195843/266F161C-912C-4D18-BC07-84C06DB6B4A9-690740.JPG View Quote |
|
|
Originally Posted By Sonoran_Tj: That looks like a pretty well thought out setup. LOL at the JFO patch though. View Quote |
|
|
Originally Posted By PineappleDevil:
Just curious, but why not use the ones actually made for holsters instead of small accessories like mag carriers? View Quote |
|
“No sympathy for the devil, Buy the ticket, take the ride...and if it occasionally gets a little heavier than what you had in mind, well...maybe chalk it off to forced conscious expansion"
|
"America is baffling sometimes, frustrating, we have outsmarted the world in so many ways yet struggle with the little shit." -Swingset
|
|
Originally Posted By MrJonesandMe:
https://i.imgur.com/eAoNhdt.jpg It's pretty interesting how technology has advanced so much in the last 10 years when it comes to gear. View Quote |
|
Advertising has us chasing cars and clothes, working jobs we hate so we can buy shit we don't need.
|
Originally Posted By DallasLooterShooter:
What is holding your phone on the chest rig? View Quote View All Quotes View All Quotes Originally Posted By DallasLooterShooter:
Originally Posted By MrJonesandMe:
https://i.imgur.com/eAoNhdt.jpg It's pretty interesting how technology has advanced so much in the last 10 years when it comes to gear. |
|
|
|
Originally Posted By MrJonesandMe: Juggernaut pals mount. View Quote How’d you mount the phone rig on the 119? Also, is that a UR tactical helmet cover? How’s the quality? Been thinking about getting one to match my 119. *On second look I’m guessing you slit a few of the stitches on the Velcro to slide the molle tabs in? |
|
|
Originally Posted By 4DoorEKk:
Nice setup! How’d you mount the phone rig on the 119? Also, is that a UR tactical helmet cover? How’s the quality? Been thinking about getting one to match my 119. *On second look I’m guessing you slit a few of the stitches on the Velcro to slide the molle tabs in? View Quote The helmet cover isn’t bad. There’s not much stress in it, but it does it’s job. |
|
|
Is possible to use the front plate bag from an LBT 6094B with the back plate bag from a LBT 6094C? I bought the 6094C but the XL Sappho front makes it a pain to shoulder but rifle but I don’t want to just run a L plate in an XL plate bag.
|
|
|
Originally Posted By andrewz71:
http://i.imgur.com/CpUm0cY.jpg It kind of stinks when you are subscribed to a picture thread and only see people talking... View Quote |
|
|
Originally Posted By GHOS7: What pouch is this mounted up front anyone? Gcode? View Quote Attached File |
|
|
Originally Posted By 4DoorEKk:
Haley Strategic D3CRM with what looks to be a Ferro Concepts Dangler https://www.AR15.Com/media/mediaFiles/473069/CA7FF517-CDD5-4F47-9CE5-4E0609679D47_jpeg-715277.JPG View Quote |
|
|
|
Has anybody ever bought and used TAG Tactical Assault Gear, Plate Carrier or London Bridge Bridge Trading Plate Carrier? Trying to decide which brand Plate Carrier to Invest into?
|
|
|
Originally Posted By Lawdog-1:
Has anybody ever bought and used TAG Tactical Assault Gear, Plate Carrier or London Bridge Bridge Trading Plate Carrier? Trying to decide which brand Plate Carrier to Invest into? View Quote |
|
|
I just found out Shellback Tactical Split from TAG Tactical Assault Gear.
|
|
|
Originally Posted By WusteHase:
Here's my current setup. Seen a fair bit of use, and is of course ever-evolving. I'm a Forward Observer (Fister, yut), so the contents of the right side pouch and the MM Hangar are relevant job tools (compass, kestrel, DAGR, CFF/CAS formats shrunk down and laminated, GRG sleeves, protractor, and about 5000 different markers), with a couple pieces of snivel gear (neck gaiter, skull cap, hand warmers), 3rd tourniquet, NVG J-arm, and an assortment of chem lights. Our unit is in the process of issuing out M17s to all the team chiefs and squad leaders, so in the meantime I've got some of my VP9 mags in there as placeholders, and I'm eagerly awaiting the new Safariland holsters that come with em. As we just got pulled back to our parent unit, we had to turn in our MBITRs and 152s, so for volume I've got a couple mags stuff in the front 152 pouch. Normally have the antennas routed along the left cummerbund and up the back. The MBITR on my back has the short whip, so it's pretty well out of the way by itself. On thing I haven't sorted very well is being able to grab my left PTT quickly with the tourniquet hanging there, but it is doable when done deliberately. The Nimravus nestles in pretty nicely behind the front radio and is easily accessible to both hands. The moto patches of course come off when I'm not taking "cool guy" pictures (that AZ flag is IR, so it's pretty damn bright under sensors). One-off Velocity Systems Scarab LT Releasable (though I have an LE front plate bag on the way so I can hook up a Nett Warrior rig from KAG in the near future). Also have the rear zip-on panel en route, to eliminate that second radio pouch and the need to sling my Camelbak when I'm dismounted. Haley Strategic DC3RX W/ the MM Hangar Kilo 727 belt http://i.imgur.com/3dTZ7Dxh.jpg http://i.imgur.com/0Y9Nh7Fh.jpg http://i.imgur.com/fUEKGZll.jpg http://i.imgur.com/RU8wVO3l.jpg http://i.imgur.com/2vpemFCl.jpg View Quote |
|
Be careful hunting monsters, least you become one yourself, for when you stare into the abyss, the abyss also stares into you. - Nietzsche
|
Originally Posted By Seatbelts: Sweet setup. Where did you get the large state IR patch? View Quote My cousin got me a name placard for my birthday, sent me a link to the company along with. So far I've gotten that AZ flag, a US reversed IR/multicam flag, larger name placard, FIST and JFO IR/MC patch, call-sign reflective/MC, and that medical patch you see on my belt IFAK. |
|
|
Certified expert in subjects no one cares about.
NC, USA
|
Hi guys, I currently have highcom 10x12 plates. They measure more like 9.5''x11''. They are too big for my Tyr Tactical basic plate carrier made for large ESAPI plates. I was thinking of going with a Crye JPC. Is there a JPC size that will fit reasonably well? If not, is there a good "discrete" plate carrier to get? I'm thinking of putting the highcom plates in a discrete plate carrier and getting actual ESAPI sized plates for SHTF.
|
|
Originally Posted By Couch-Commando:
Hi guys, I currently have highcom 10x12 plates. They measure more like 9.5''x11''. They are too big for my Tyr Tactical basic plate carrier made for large ESAPI plates. I was thinking of going with a Crye JPC. Is there a JPC size that will fit reasonably well? If not, is there a good "discrete" plate carrier to get? I'm thinking of putting the highcom plates in a discrete plate carrier and getting actual ESAPI sized plates for SHTF. View Quote |
|
|
Originally Posted By D_Man:
You can make it work with a medium JPC, but the plates will be about an inch too short. You can add a piece of closed cell foam taped to the bottom of the plate (to keep it in place) to fill out the space. View Quote |
|
Before the beginning of great brilliance, there must be chaos.
Si vis pacem, para bellum |
|
Before the beginning of great brilliance, there must be chaos.
Si vis pacem, para bellum |
|
|
|
|
Originally Posted By BOONEA:
My kit
https://scontent.ffcm1-1.fna.fbcdn.net/v/t1.0-9/45684369_10156489970982626_5649450245713559552_n.jpg?_nc_cat=109&_nc_ht=scontent.ffcm1-1.fna&oh=5557689280579c07e08ed00041321262&oe=5C8A0280 https://scontent.ffcm1-2.fna.fbcdn.net/v/t1.0-9/46049004_10156489971652626_9136500516497391616_n.jpg?_nc_cat=106&_nc_ht=scontent.ffcm1-2.fna&oh=6d3ccd669b857cb1e035bf3e2365e00f&oe=5C811D97 View Quote |
|
|
Originally Posted By BOONEA:
My kit
https://scontent.ffcm1-1.fna.fbcdn.net/v/t1.0-9/45684369_10156489970982626_5649450245713559552_n.jpg?_nc_cat=109&_nc_ht=scontent.ffcm1-1.fna&oh=5557689280579c07e08ed00041321262&oe=5C8A0280 https://scontent.ffcm1-2.fna.fbcdn.net/v/t1.0-9/46049004_10156489971652626_9136500516497391616_n.jpg?_nc_cat=106&_nc_ht=scontent.ffcm1-2.fna&oh=6d3ccd669b857cb1e035bf3e2365e00f&oe=5C811D97 View Quote |
|
Before the beginning of great brilliance, there must be chaos.
Si vis pacem, para bellum |
It's a Petzl Tactical STRIX light. Not a huge fan of it, but it's our SOP.
|
|
|
Originally Posted By 4DoorEKk:
Diggin the new placard.. and the all seeing cat eye https://www.AR15.Com/media/mediaFiles/473069/F7BF349D-485E-4370-B0B6-3B5A1BBD72FB_jpeg-732570.JPG https://www.AR15.Com/media/mediaFiles/473069/AC0584D9-280A-4933-A38D-030E8975FBE6_jpeg-732574.JPG View Quote |
|
|
Andrew what rig is that?
Originally Posted By andrewz71: Actually thread title is: Plate carrier thread? ** This is NOW a post pics of your Plate Carrier THREAD ** Since this is a pic thread questions and chat should be posted separate from this thread... Example: http://i.imgur.com/CpUm0cY.jpg It kind of stinks when you are subscribed to a picture thread and only see people talking... View Quote |
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.