User Panel
User Panel
User Panel
|
Posted: 1/9/2021 2:36:38 AM EDT
[#1]
Quote HistoryOriginally Posted By PFran42: And finally... (cross posted) Anyone owning a Velcro lined outer belt looking for more flexibility should consider picking up a HSGI Micro Grip Belt Panel ($24 on Amazon). Mine showed up today and I paired it up to my Blue Alpha. Cool thing is I didn't have to adjust the belt in or out. It fit just as well as when I am running my BA Low Profile / Inner EDC belt. I imagine the HSGI panel will stay in the setup 90% of the time, only being swapped out for classes, LARPing and SHTF. https://www.AR15.Com/media/mediaFiles/309598/20-hsg-95mg01bk_jpg-1770710.JPG https://www.AR15.Com/media/mediaFiles/309598/PXL_20210109_011037472_jpg-1770535.JPG @PFran42 Got a link to the Micro Grip? I've searched Amazon a few times and nothing comes up. |
|
|
|
|
Posted: 1/9/2021 3:52:06 AM EDT
[#2]
Quote HistoryOriginally Posted By StevieJ309: @PFran42 Got a link to the Micro Grip? I've searched Amazon a few times and nothing comes up. @StevieJ309 It is showing out of stock now. Here are the links that showed them in stock when I made the purchase. Maybe bookmark these links and check every few days: https://www.amazon.com/HSGI-Micro-Grip-Belt-Panel/dp/B01B1H9B2I https://www.amazon.com/High-Speed-Gear-Micro-Padded/dp/B0153IKINC |
|
|
|
|
Posted: 1/9/2021 4:14:30 AM EDT
[#3]
I was looking for a velcro pad last year and the HSGI slims were OOS, decided to try out Wilder. Sizing is the same and works great. Price is basically the same.
HSGI probably mo betta as they make hook and loop side pads. https://wildertactical.com/collections/belts/products/urban-assault-pad |
|
|
|
AZ, USA
|
Posted: 1/9/2021 9:39:29 AM EDT
[#4]
Quote HistoryOriginally Posted By northcoastwizard: I was looking for a velcro pad last year and the HSGI slims were OOS, decided to try out Wilder. Sizing is the same and works great. Price is basically the same. HSGI probably mo betta as they make hook and loop side pads. https://wildertactical.com/collections/belts/products/urban-assault-pad I was in the same boat recently. HSGI belt pad was OOS everywhere and buying direct had like a 20-week lead time. Stumbled across the Wilder Tactical belt pad and although if you buy direct, there's a little bit of a lead time, I found one in stock at HYDRA Tactical, which has free shipping. |
|
|
AZ, USA
|
Posted: 1/9/2021 6:45:22 PM EDT
[#5]
Unity Tactical Spark marker light.
 VELCRO One-Wrap, Coyote, to secure stuff...  ...used in conjunction with an ITW Grimlock for glove retention. (Potato pic) 
|
|
|
|
Posted: 1/9/2021 8:19:33 PM EDT
[#6]
OneWrap is gonna solve World Hunger... Wait and see.
|
|
|
|
USA
|
Posted: 1/11/2021 12:44:35 PM EDT
[Last Edit: Grindel3710]
[#7]
Finally decided on a belt and setup.
https://www.flickr.com/gp/189661952@N03/F0MCDe https://www.flickr.com/gp/189661952@N03/619344 |
|
|
|
Posted: 1/11/2021 2:40:31 PM EDT
[#8]
Quote HistoryOriginally Posted By Grindel3710: Finally decided on a belt and setup. https://www.flickr.com/gp/189661952@N03/F0MCDe https://www.flickr.com/gp/189661952@N03/619344  Attached File Attached File |
|
|
|
USA
|
Posted: 1/11/2021 3:41:37 PM EDT
[#9]
Quote HistoryThanks for the assist! 
|
|
|
|
Posted: 1/11/2021 7:02:51 PM EDT
[#10]
Two smallish updates...
1. Picked up a FDE HK Hook to replace the carabiner I was running to secure gloves.  2. Also, picked up a Walker's Universal Muff and Glasses Holder. I figured it would come in handy at a class.   HK Hook Walker's muff holder |
|
|
|
|
Posted: 1/12/2021 10:06:22 PM EDT
[#11]
Quote HistoryOriginally Posted By PFran42: Two smallish updates... 1. Picked up a FDE HK Hook to replace the carabiner I was running to secure gloves. https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224333826_jpg-1775303.JPG 2. Also, picked up a Walker's Universal Muff and Glasses Holder. I figured it would come in handy at a class. https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224232976_jpg-1775312.JPG https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224308660_jpg-1775317.JPG HK Hook www.amazon.com/dp/B004GEUHDG Walker's muff holder www.amazon.com/dp/B078X1XMV4 I’d snap that holder off first stage at any of the classes or comps I have shot. YMMV but I have learned to keep to a minimum things sticking out that can get snagged on stuff. |
|
|
|
|
Posted: 1/13/2021 10:47:08 PM EDT
[Last Edit: TxAggieA-Batt]
[#12]
Looking to put together my first battle belt rig. I'd like to keep it pretty minimalist. Going with a blue alpha belt, but having a hard time choosing between molle and standard version.
I figure its better to have it than not, but wondering how necessary it will be. Looking to attach holster, some estac magazine pouches and an ifak pouch. |
|
|
|
|
Posted: 1/13/2021 11:09:02 PM EDT
[#13]
Quote HistoryOriginally Posted By TxAggieA-Batt: Looking to put together my first battle belt rig. I'd like to keep in pretty minimalist. Going with a blue alpha belt, but having a hard time choosing between molle and standard version. In figure its better to have it than not, but wondering how necessary it will be. Looking to attach holster, some estac magazine pouches and an ifak pouch. Non molle attach pouches with one wrap ...... Profit |
|
|
|
|
Posted: 1/13/2021 11:23:11 PM EDT
[#14]
Quote HistoryOriginally Posted By TxAggieA-Batt: Looking to put together my first battle belt rig. I'd like to keep it pretty minimalist. Going with a blue alpha belt, but having a hard time choosing between molle and standard version. I figure its better to have it than not, but wondering how necessary it will be. Looking to attach holster, some estac magazine pouches and an ifak pouch. I'd nix the MOLLE/PALS on mine if I had it to do all over again. |
|
|
|
|
Posted: 1/13/2021 11:24:57 PM EDT
[#15]
Quote HistoryOriginally Posted By stoner01: Non molle attach pouches with one wrap ...... Profit And I'm on the other side. If you know the right way to use WTF straps, which includes feeding them back through the pouch a second time in the middle molle row, they mount pouches rock solid to molle. Rock solid...while being very thin and flexible...and not digging into you like malice clips. No doubt, it's faster to mount things with One Wrap, but not as solid. Different strokes I guess.   
|
|
|
|
NH, USA
|
Posted: 1/14/2021 7:28:13 AM EDT
[#16]
How do you all store your belts?
|
|
|
|
Posted: 1/14/2021 7:55:56 AM EDT
[Last Edit: Advance]
[#17]
Quote HistoryOriginally Posted By manywits: How do you all store your belts? I built something similar to this.  Attached File |
|
|
|
|
Posted: 1/14/2021 12:33:48 PM EDT
[#18]
Quote HistoryOriginally Posted By PFran42: @StevieJ309 It is showing out of stock now. Here are the links that showed them in stock when I made the purchase. Maybe bookmark these links and check every few days: https://www.amazon.com/HSGI-Micro-Grip-Belt-Panel/dp/B01B1H9B2I https://www.amazon.com/High-Speed-Gear-Micro-Padded/dp/B0153IKINC Quote HistoryOriginally Posted By PFran42: @StevieJ309 It is showing out of stock now. Here are the links that showed them in stock when I made the purchase. Maybe bookmark these links and check every few days: https://www.amazon.com/HSGI-Micro-Grip-Belt-Panel/dp/B01B1H9B2I https://www.amazon.com/High-Speed-Gear-Micro-Padded/dp/B0153IKINC Originally Posted By PFran42: Two smallish updates... 1. Picked up a FDE HK Hook to replace the carabiner I was running to secure gloves. https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224333826_jpg-1775303.JPG 2. Also, picked up a Walker's Universal Muff and Glasses Holder. I figured it would come in handy at a class. https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224232976_jpg-1775312.JPG https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224308660_jpg-1775317.JPG HK Hook www.amazon.com/dp/B004GEUHDG Walker's muff holder www.amazon.com/dp/B078X1XMV4 Wait. Are we not boycotting Amazon now? |
|
|
|
|
Posted: 1/14/2021 2:54:06 PM EDT
[#19]
Quote HistoryOriginally Posted By scuba_steve: And I'm on the other side. If you know the right way to use WTF straps, which includes feeding them back through the pouch a second time in the middle molle row, they mount pouches rock solid to molle. Rock solid...while being very thin and flexible...and not digging into you like malice clips. No doubt, it's faster to mount things with One Wrap, but not as solid. Different strokes I guess. https://i.imgur.com/zHaqwYh.jpg https://i.imgur.com/OjpRTjg.jpg?1 |
|
|
|
|
Posted: 1/14/2021 6:17:58 PM EDT
[#20]
Quote HistoryOriginally Posted By diggerwolf: Wait. Are we not boycotting Amazon now? Quote HistoryOriginally Posted By diggerwolf: Originally Posted By PFran42: @StevieJ309 It is showing out of stock now. Here are the links that showed them in stock when I made the purchase. Maybe bookmark these links and check every few days: https://www.amazon.com/HSGI-Micro-Grip-Belt-Panel/dp/B01B1H9B2I https://www.amazon.com/High-Speed-Gear-Micro-Padded/dp/B0153IKINC Originally Posted By PFran42: Two smallish updates... 1. Picked up a FDE HK Hook to replace the carabiner I was running to secure gloves. https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224333826_jpg-1775303.JPG 2. Also, picked up a Walker's Universal Muff and Glasses Holder. I figured it would come in handy at a class. https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224232976_jpg-1775312.JPG https://www.ar15-backup.com/media/mediaFiles/309598/PXL_20210111_224308660_jpg-1775317.JPG HK Hook www.amazon.com/dp/B004GEUHDG Walker's muff holder www.amazon.com/dp/B078X1XMV4 Wait. Are we not boycotting Amazon now? Thanks for those links, PFran. I've got a $50 gift card for Amazon that I'm trying to use up then I'll go back to avoiding them like usual. |
|
|
|
|
Posted: 1/14/2021 9:29:39 PM EDT
[#21]
Quote HistoryOriginally Posted By manywits: How do you all store your belts? I stand my PC up on a shelf in my gun safe and wrap my belt around it. I use the micro pad and once it’s in place it won’t lay flat. |
|
|
|
VA, USA
|
Posted: 1/14/2021 10:41:17 PM EDT
[#22]
 Ronin Senshi Esstac double pistol gapped Esstac medium 556 BFG micro dump pouch Direct Action horizontal med pouch True North MHA w/Gcode XST Direct Action TQ pouch |
|
|
|
Posted: 1/15/2021 9:33:10 AM EDT
[#23]
Quote HistoryOriginally Posted By Massan: https://i.ibb.co/fHnzRWH/20210114-190235.jpg Ronin Senshi Esstac double pistol gapped Esstac medium 556 BFG micro dump pouch Direct Action horizontal med pouch True North MHA w/Gcode XST Direct Action TQ pouch Very Nice. While we are on topic, do I want gapped or non gapped esstacs for a molle belt? |
|
|
|
|
Posted: 1/15/2021 10:11:42 AM EDT
[#24]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Very Nice. While we are on topic, do I want gapped or non gapped esstacs for a molle belt? Do you have different sized baseplates for your mags? Mind the gap. If not, you should be fine with a regular. |
|
|
|
|
Posted: 1/15/2021 10:24:03 AM EDT
[#25]
Quote HistoryOriginally Posted By stoner01: Do you have different sized baseplates for your mags? Mind the gap. If not, you should be fine with a regular. Quote HistoryOriginally Posted By stoner01: Originally Posted By UndrGrndPrdcts: Very Nice. While we are on topic, do I want gapped or non gapped esstacs for a molle belt? Do you have different sized baseplates for your mags? Mind the gap. If not, you should be fine with a regular. So they will both fit with wtf straps? I thought the spacing was off on one. Thats why I'm confused. |
|
|
|
|
Posted: 1/15/2021 10:59:50 AM EDT
[#26]
Quote HistoryOriginally Posted By UndrGrndPrdcts: So they will both fit with wtf straps? I thought the spacing was off on one. Thats why I'm confused. The spacing is different with the GAP version |
|
|
|
|
Posted: 1/15/2021 11:39:19 AM EDT
[#27]
Quote HistoryOriginally Posted By NCPatrolAR: The spacing is different with the GAP version Quote HistoryOriginally Posted By NCPatrolAR: Originally Posted By UndrGrndPrdcts: So they will both fit with wtf straps? I thought the spacing was off on one. Thats why I'm confused. The spacing is different with the GAP version Enough that it will not fit molle belts with wtf straps? |
|
|
|
|
Posted: 1/15/2021 11:41:07 AM EDT
[Last Edit: scuba_steve]
[#28]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Enough that it will not fit molle belts with wtf straps? Not an issue on my blue alpha belt, on which I have a two mag gap pistol pouch mounted with WTF straps, pictured above. |
|
|
|
|
Posted: 1/15/2021 11:59:32 AM EDT
[#29]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Enough that it will not fit molle belts with wtf straps? Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By NCPatrolAR: Originally Posted By UndrGrndPrdcts: So they will both fit with wtf straps? I thought the spacing was off on one. Thats why I'm confused. The spacing is different with the GAP version Enough that it will not fit molle belts with wtf straps? The gaps will still fit on molle belts |
|
|
|
|
Posted: 1/15/2021 12:02:31 PM EDT
[#30]
Quote HistoryOriginally Posted By scuba_steve: Not an issue on my blue alpha belt, on which I have a two mag gap pistol pouch mounted with WTF straps, pictured above. Quote HistoryOriginally Posted By scuba_steve: Originally Posted By UndrGrndPrdcts: Enough that it will not fit molle belts with wtf straps? Not an issue on my blue alpha belt, on which I have a two mag gap pistol pouch mounted with WTF straps, pictured above. Great thanks. |
|
|
|
|
Posted: 1/15/2021 12:19:49 PM EDT
[Last Edit: SSully]
[#31]
Quote HistoryOriginally Posted By UndrGrndPrdcts: Enough that it will not fit molle belts with wtf straps? Quote HistoryOriginally Posted By UndrGrndPrdcts: Originally Posted By NCPatrolAR: Originally Posted By UndrGrndPrdcts: So they will both fit with wtf straps? I thought the spacing was off on one. Thats why I'm confused. The spacing is different with the GAP version Enough that it will not fit molle belts with wtf straps? The gapped double kywi fit my eagle OGB just fine.  Attached File |
|
|
|
|
Posted: 1/15/2021 12:26:15 PM EDT
[Last Edit: Advance]
[#32]
You all need to read this Estaac blog post on GAP spacing and attachment methods.
https://esstac.com/blog/micro-pals-webbing-belts-and-attachments-/ Even if your GAP double pistol mag pouch fits in the PALS loops, you may experience issues butting up your M4 pouch right next to it. TL;DR: Velcro OneWrap FTW... It allows for better vertical placement and horizontal micro adjustments.  Attached FileMy pistol/M4 mag setup:  Attached File |
|
|
|
|
Posted: 1/15/2021 12:33:56 PM EDT
[#33]
While it may be close when the belt is flat, I’ve found that potential clearance issues tend to resolve themselves when the belt is donned.
 Attached File |
|
|
|
|
Posted: 1/15/2021 12:40:18 PM EDT
[#34]
Quote HistoryOriginally Posted By PFran42: You all need to read this Estaac blog post on GAP spacing and attachment methods. https://esstac.com/blog/micro-pals-webbing-belts-and-attachments-/ Even if your GAP double pistol mag pouch fits in the PALS loops, you may experience issues butting up your M4 pouch right next to it. TL;DR: Velcro OneWrap FTW... It allows for better vertical placement and horizontal micro adjustments. https://www.ar15.com/media/mediaFiles/309598/all_jpg-1780162.JPG My pistol/M4 mag setup: https://www.ar15.com/media/mediaFiles/309598/WPC-Q-000001_11_28_09_AM_png-1780164.JPG OneWrap is a good solution but less secure than PALS. Should work for most applications but still should be taken into consideration. You won't have an issue with the gap being butted up against another pouch if they're placed somewhere around the curves of your hip as demonstrated in the post above. |
|
|
|
|
Posted: 1/15/2021 12:56:04 PM EDT
[#35]
Quote HistoryOriginally Posted By Space-Cadet: OneWrap is a good solution but less secure than PALS. Should work for most applications but still should be taken into consideration. You won't have an issue with the gap being butted up against another pouch if they're placed somewhere around the curves of your hip as demonstrated in the post above. Quote HistoryOriginally Posted By Space-Cadet: Originally Posted By PFran42: You all need to read this Estaac blog post on GAP spacing and attachment methods. https://esstac.com/blog/micro-pals-webbing-belts-and-attachments-/ Even if your GAP double pistol mag pouch fits in the PALS loops, you may experience issues butting up your M4 pouch right next to it. TL;DR: Velcro OneWrap FTW... It allows for better vertical placement and horizontal micro adjustments. https://www.ar15.com/media/mediaFiles/309598/all_jpg-1780162.JPG My pistol/M4 mag setup: https://www.ar15.com/media/mediaFiles/309598/WPC-Q-000001_11_28_09_AM_png-1780164.JPG OneWrap is a good solution but less secure than PALS. Should work for most applications but still should be taken into consideration. You won't have an issue with the gap being butted up against another pouch if they're placed somewhere around the curves of your hip as demonstrated in the post above. We need like buttons. Specifically going this route for the 'more secure' aspect. |
|
|
|
ID, USA
|
Posted: 1/17/2021 8:49:17 AM EDT
[#36]
Anyone have any experience with the AWS LAB? Seems like the mounting system is a little much. adding a molle panel to the Velcro and then adding your pouches to that molle panel. To me seems like there would be a lot of wiggle room. any benefit to this system over a blue alpha belt?
|
|
|
NC, USA
|
Posted: 1/17/2021 9:13:58 AM EDT
[#37]
|
|
|
|
Posted: 1/17/2021 9:59:35 AM EDT
[#38]
Originally Posted By lxranes: Anyone have any experience with the AWS LAB? Seems like the mounting system is a little much. adding a molle panel to the Velcro and then adding your pouches to that molle panel. To me seems like there would be a lot of wiggle room. any benefit to this system over a blue alpha belt? I use one, works great. Keeps things from moving around. A little fuss early on, but I don't change out pouches so it works good. |
|
|
|
CA, USA
|
Posted: 1/17/2021 4:30:27 PM EDT
[#39]
Quote HistoryOriginally Posted By lxranes: Anyone have any experience with the AWS LAB? Seems like the mounting system is a little much. adding a molle panel to the Velcro and then adding your pouches to that molle panel. To me seems like there would be a lot of wiggle room. any benefit to this system over a blue alpha belt? I picked one up recently; those molle panels are kinda of a b!@#$ to remove if you don't have the little plastic tool they supply you with. They are not going anywhere. And if you lose that little plastic piece, a cut down credit card works just as well. If you think that adding/removing those molle panels are too much look elsewhere. Preference I guess.On a related note, anyone know whats up with their CS? Had a item backordered and now its in stock. Inquired about it but nothing..... |
|
|
|
Posted: 1/17/2021 4:59:06 PM EDT
[#40]
They got blasted pretty hard last year. They OEM for some outfits on top of direct sales of their own sizable product line.
I'd give em a few days before trying again. They're legit, probably just swamped. |
|
|
|
|
Posted: 1/17/2021 9:59:50 PM EDT
[#41]
Tag
|
|
|
|
|
Posted: 1/18/2021 2:58:02 PM EDT
[Last Edit: Advance]
[#42]
@1iviper was right. The Multicam Cordura got me...
After waiting for over a month for my SL 6390RDS-2832-552 (551 would be the RH model) to show up and then learning that my holster (without modification) would only fit a G19/19x/45, I learned that all of the shells for a particular model are the same size. A sized barrel plug is the only difference between a 19 and 34. Once I considered threaded barrels, G17's, G34's, compensators, etc. I decided that the best option for me would be a Safariland model compatible with a G34/35. As luck would have it, OP Tactical had a LH 6354DO-6832-702 (701 is the RH model) in stock and here we are 48 hours later. One thing to note between the 6354DO and 6390RDS... The QLS Fork sits higher on the shell with the 6354DO. If you like the height of a 6390RDS on a mid ride UBL, you're probably going to want a high ride UBL if switching to the 6354DO. I've got a True North Concepts Modular Holster Adapter (MHA) that was set to the mid mounting location so I'm going to move the QLS up a notch. 6390RDS on left:  Attached FileNot sure what I'm going to do with the 6390RDS but I now have a complete mid-ride UBL w/QLS spare setup. I know... Two is one... Lastly, I swapped out my FastMag for a naked medium KYWI in Multicam and replaced one of my USGI tacos for a Tactical Tailor pistol mag pouch so that I could better secure my Leatherman Surge (which replaced my Wave).  Attached File |
|
|
|
|
Posted: 1/18/2021 5:47:25 PM EDT
[#43]
This is a project I’m working on. I’m sure it’s not original but I like to make stuff work for me
Goal is lower profile than a full blown war belt but still able to run a Safariland ALS on a regular pants belt. I tried the Frank Proctor belt loop but it’s not comfortable for all day wear and not as stable as a UBL in my opinion. The problem with the UBL is it’s too big for a 1.5” pants belt and rocks back and forth and up and down. RDR gear has an injection molded spacer that would solve that but at $15 + shipping it’s a little pricey.Solution? Some scrap kydex, clamps, and a heat gun.   I used a low ride 2.25” UBL I had it laying around. This is pretty crude but it’s solid. I have another mid ride UBL on the way and on this one I’m going to use some plywood to clamp it to make it pretty. The UBL wasn’t bothered by the heat at all. Surprisingly with a stiff belt the UBL doesn’t flop at all. Makes me think most of the flop is from the belt loop being too big. Next mod is to wrap a 6360 STX basketweave 1911 holster in woodland Cordura. |
|
|
|
|
Posted: 1/18/2021 7:21:33 PM EDT
[#44]
Quote HistoryOriginally Posted By jonathon: This is a project I’m working on. I’m sure it’s not original but I like to make stuff work for me Goal is lower profile than a full blown war belt but still able to run a Safariland ALS on a regular pants belt. I tried the Frank Proctor belt loop but it’s not comfortable for all day wear and not as stable as a UBL in my opinion. The problem with the UBL is it’s too big for a 1.5” pants belt and rocks back and forth and up and down. RDR gear has an injection molded spacer that would solve that but at $15 + shipping it’s a little pricey.Solution? Some scrap kydex, clamps, and a heat gun. https://i.imgur.com/IL4y21W.jpg https://i.imgur.com/sgQWwdy.jpg I used a low ride 2.25” UBL I had it laying around. This is pretty crude but it’s solid. I have another mid ride UBL on the way and on this one I’m going to use some plywood to clamp it to make it pretty. The UBL wasn’t bothered by the heat at all. Surprisingly with a stiff belt the UBL doesn’t flop at all. Makes me think most of the flop is from the belt loop being too big. Next mod is to wrap a 6360 STX basketweave 1911 holster in woodland Cordura. Is the basketweave molded in or is it some type of wrap like the cordura? |
|
|
|
|
Posted: 1/19/2021 12:14:39 AM EDT
[#45]
Quote HistoryOriginally Posted By PFran42: @1iviper was right. The Multicam Cordura got me... After waiting for over a month for my SL 6390RDS-2832-552 (551 would be the RH model) to show up and then learning that my holster (without modification) would only fit a G19/19x/45, I learned that all of the shells for a particular model are the same size. A sized barrel plug is the only difference between a 19 and 34. Once I considered threaded barrels, G17's, G34's, compensators, etc. I decided that the best option for me would be a Safariland model compatible with a G34/35. As luck would have it, OP Tactical had a LH 6354DO-6832-702 (701 is the RH model) in stock and here we are 48 hours later. One thing to note between the 6354DO and 6390RDS... The QLS Fork sits higher on the shell with the 6354DO. If you like the height of a 6390RDS on a mid ride UBL, you're probably going to want a high ride UBL if switching to the 6354DO. I've got a True North Concepts Modular Holster Adapter (MHA) that was set to the mid mounting location so I'm going to move the QLS up a notch. 6390RDS on left: https://www.ar15.com/media/mediaFiles/309598/PXL_20210118_184429785_jpg-1785215.JPG Not sure what I'm going to do with the 6390RDS but I now have a complete mid-ride UBL w/QLS spare setup. I know... Two is one... Lastly, I swapped out my FastMag for a naked medium KYWI in Multicam and replaced one of my USGI tacos for a Tactical Tailor pistol mag pouch so that I could better secure my Leatherman Surge (which replaced my Wave). https://www.ar15.com/media/mediaFiles/309598/PXL_20210118_174540749_jpg-1785191.JPG dat sh+t looks proper 
|
|
|
|
|
Posted: 1/19/2021 4:29:05 AM EDT
[#46]
Quote HistoryOriginally Posted By Space-Cadet: Is the basketweave molded in or is it some type of wrap like the cordura? STX Basketweave is molded into the plastic. The leather covered holsters really suck but would probably be okay to wrap if you peeled it off. |
|
|
|
|
Posted: 1/19/2021 8:41:46 PM EDT
[#47]
 QLS and One Wrap for everything 
|
|
|
|
|
Posted: 1/21/2021 9:40:04 PM EDT
[Last Edit: Advance]
[#48]
Out with the old...
 Attached FileIn with the new...  Attached FileBlue Force Gear Micro Trauma NOW! and Ten Speed Ultralight Dump Pouch. My previous mounting of the HSGI Bleeder/Blow Out Pouch was sub optimal as it could not be readily accessed by both hands. I went with the smaller dump pouch in order to clear up some room on the right side of the IFAK.  Attached File Attached File Attached File |
|
|
|
|
Posted: 1/22/2021 3:41:08 PM EDT
[#49]
Quote HistoryOriginally Posted By PFran42: Out with the old... https://www.ar15.com/media/mediaFiles/309598/PXL_20210122_000714699_jpg-1790511.JPG In with the new... https://www.ar15.com/media/mediaFiles/309598/PXL_20210122_000936013_jpg-1790513.JPG Blue Force Gear Micro Trauma NOW! and Ten Speed Ultralight Dump Pouch. My previous mounting of the HSGI Bleeder/Blow Out Pouch was sub optimal as it could not be readily accessed by both hands. I went with the smaller dump pouch in order to clear up some room on the right side of the IFAK. https://www.ar15.com/media/mediaFiles/309598/PXL_20210122_001242761_jpg-1790514.JPG https://www.ar15.com/media/mediaFiles/309598/PXL_20210122_001250641_jpg-1790516.JPG https://www.ar15.com/media/mediaFiles/309598/PXL_20210122_001229807_jpg-1790518.JPG Let me know if you want the old to go to a knew home... 
|
|
|
|
|
Posted: 1/22/2021 4:21:50 PM EDT
[#50]
 Attached FileSOE gear belt. Nightfall Custom holster on Safariland ubl and TRex thigh strap. Esstac and Gcode pouches. NAR Tourniquet in TRex holder. LAPG dump pouch. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
