Ok you CZ fanbois.......but WAIT! Moar Ridiculousness - Page 2

Handguns » CZ Pistols And Clones

Site Notices

[ARCHIVED THREAD] - Ok you CZ fanbois.......but WAIT! Moar Ridiculousness (Page 2 of 3)

Posted: 11/15/2019 7:44:28 PM EDT

[#1]

Ive only seen this one, so I may be wrong, the black ones are 1300 or more

Posted: 11/15/2019 11:10:04 PM EDT

[#2]

A CZC Shadow CUSTOM is $1,300. What you bought is a basic SP-01 Shadow, only a duo tone. The black version of what you bought is usually $800-$900. Price floats around some.

Posted: 11/16/2019 4:45:23 PM EDT

[#3]

well, I look at it as a bargain, as they are a great value.

Now I just got to start the build for this one.

Posted: 11/16/2019 4:49:29 PM EDT

[#4]

My current Sp-01 did its job very well today.

1st in Carry Optics
1st Overall.

Attached File

I now have some bragging rights.

Attached File

Posted: 11/16/2019 4:52:34 PM EDT

[#5]

Stage 3 win here, this was a fun stage.

November 16, 2019

https://www.youtube.com/watch?v=fubP8CHYYRs

Posted: 11/20/2019 3:59:37 PM EDT

[#6]

Let the molestation begin.

Attached File

Posted: 11/20/2019 9:46:07 PM EDT

[#7]

Quote History

Quoted:
A CZC Shadow CUSTOM is $1,300. What you bought is a basic SP-01 Shadow, only a duo tone. The black version of what you bought is usually $800-$900. Price floats around some.

View Quote

This.

CZC sells the Shadow for 880 and the duo tone for 920.

Nice sale on the duo tone though, I'm tempted. I heard the slides on those are blued.

Posted: 11/21/2019 12:49:14 AM EDT

[#8]

I would say, even at $829 I got a damned good deal.
It needs some tuning, but I dont think I will have to do too much to it.

I have it in pieces and started the polishing.

Going to respring everything.

Not sure I am going to swap out any parts, just yet. Gonna play with it and see how it feels. I dont want to get that "AR15 buffer spring" feel to it that CZC seems to out out. I dont like that feeling, and can deal with a bit heavier pull.

The ext. safety does not need any fitting like the SP-01 did, so that's a plus.

The Nitro Fin will be in Friday.

Have to order the dovetail mount this week. Not in a big rush for this, as the LGS does not have any SROs in stock. Hopefully next week.

Going to use that time to figure out which Lok grips I am getting, color wise. The palm swells seem to be working out very well for me. Just not sure what color I want to go with it. Maybe just flat black.
I may not change the colors on this. I will make up my mind when the black Nitro Fin is installed, on the Sparkly silver frame.

Coming from Open, the SRO being a bit higher mounted than milling, seems to be working very well for me. I have never really been better than 1.3- 1.4 seconds coming out of the holster and putting one in the A zone, I dont really have any issue with my presentation, so I dont really see the need to mill the slide. The CZ Customs dovetail mount is of pretty damn good quality and has been holding its own. That is, once I decided to put loctite on things.

I keep updating the progress on this one and take more pics, if yall want. Hoping what I do can help others in the process.

Posted: 11/21/2019 1:07:38 PM EDT

[#9]

[wallet]

[/wallet]

[Me]

[/Me]

Attached File

Still need grips and the optic

Posted: 11/21/2019 7:30:41 PM EDT

[#10]

Almost an Open Poors gun

Attached File

Posted: 11/24/2019 8:48:42 AM EDT

[#11]

All my goodys came in and I spent a few re-springing everything, polishing done, ext. firing pin, etc.. Now all we have to do is find an SRO in stock from one of two LGS I use.

DA is around 4.2# and SA is .....

Attached File

Posted: 11/29/2019 3:05:50 PM EDT

[#12]

Quote History

Quoted:
All my goodys came in and I spent a few re-springing everything, polishing done, ext. firing pin, etc.. Now all we have to do is find an SRO in stock from one of two LGS I use.

DA is around 4.2# and SA is .....

https://www.AR15.Com/media/mediaFiles/120021/Internals_Done_jpg-1171868.JPG

View Quote

Nice gun! I have the same gun setup for carry optics as well. Is that nitro fin legal in CO? I kinda want one after seeing yours lol

Posted: 11/29/2019 7:48:38 PM EDT

[#13]

Quote History

Quoted:
Nice gun! I have the same gun setup for carry optics as well. Is that nitro fin legal in CO? I kinda want one after seeing yours lol

View Quote View All Quotes

View All Quotes

Quote History

Quoted:

Quoted:
All my goodys came in and I spent a few re-springing everything, polishing done, ext. firing pin, etc.. Now all we have to do is find an SRO in stock from one of two LGS I use.

DA is around 4.2# and SA is .....

https://www.AR15.Com/media/mediaFiles/120021/Internals_Done_jpg-1171868.JPG

Nice gun! I have the same gun setup for carry optics as well. Is that nitro fin legal in CO? I kinda want one after seeing yours lol

Go for it! yes it is even legal on Production.....*IF* you take about 1 mm off of it. It will fit in the box that way. However, since CO guns do NOT (and cant anyways) have to fit in the box, its 100% legal without question.
It passed muster at La Gator a few weeks ago, and that is a Major Match.

If you do order it, tell them "The guy with the manly Kia Soul sent me".

Posted: 11/29/2019 8:02:13 PM EDT

[#14]

Oh, we are so close to this new one being competed.

I can wait to shoot a match with it!
Trigger is a wee bit different than the SP-01 Not in a bad way, just different.
Both are around 4# DA, 2'ish SA, smooth and crisp. Take up is a bit different, reset a hair longer, but less pre travel, the first wall before you hit the DA strike.

I left the stock hammer in this one, did not do anything in the sear cage. Just polished everything to a mirror finish, ext. firing pin, 10 lb hammer spring, reduced power trigger return spring, firing pin spring is lighter too.....I dont know what it is, but it is from a 9lb Wolf recoil spring kit I had laying around. I also need to see if I have another 9lb recoil spring laying around. This steup works REALLY well for the ammo I load. This one has the 11, and it works pretty well, but the SP-01 is running the 9#.

ETA: The extra wide safety fit pretty good. I did not have to fit it at all. I just tapped it out a wee bit and it works. Nitro fin does not lock the slide,BUT, with a bit of material removed, it will do so. I started on this and took me about an hour to remove a 1/4 of a mm....NO... LOL. I need to find a machine of some sort.....like a belt sander.

This really is the poster child for the OPEN POORS division.

Attached File

Posted: 11/29/2019 10:47:03 PM EDT

[#15]

Quote History

Quoted:

Go for it! yes it is even legal on Production.....*IF* you take about 1 mm off of it. It will fit in the box that way. However, since CO guns do NOT (and cant anyways) have to fit in the box, its 100% legal without question.
It passed muster at La Gator a few weeks ago, and that is a Major Match.

If you do order it, tell them "The guy with the manly Kia Soul sent me".

View Quote

Lol awesome thanks

Posted: 12/3/2019 12:00:38 PM EDT

[#16]

A bit of an update on this last one.

Safety is dragging the slide.

I am having to fit this one too, but it is not as bad as the SP-01.

You can see here where I need to remove some material.

Attached File

Maybe this will help

Attached File

and here we have a close up.

Attached File

This is pretty close to allowing proper slide movement. I will work on it a bit more this afternoon to get it right.

I may and up sending these to CZ Customs to help the next person out a bit.

Posted: 12/5/2019 11:18:02 AM EDT

[#17]

All I need is my LOK Grips and we are 100% good to go.

Attached File

Posted: 12/23/2019 7:53:44 PM EDT

[#18]

and now we are looking to start in on one of these....

Posted: 12/23/2019 10:21:44 PM EDT

[#19]

Quote History

Quoted:
Stage 3 win here, this was a fun stage.

https://www.youtube.com/watch?v=fubP8CHYYRs

View Quote

Dude you look nothing like your avatar.

And as for that P10c OR....do it. Snagged mine and absolutely love it. Will probably dip into the CO game with the 507 I've currently got on it.

Posted: 12/24/2019 9:35:04 AM EDT

[#20]

Quote History

Quoted:
Dude you look nothing like your avatar.

And as for that P10c OR....do it. Snagged mine and absolutely love it. Will probably dip into the CO game with the 507 I've currently got on it.

View Quote View All Quotes

View All Quotes

Quote History

Quoted:

Quoted:
Stage 3 win here, this was a fun stage.

https://www.youtube.com/watch?v=fubP8CHYYRs

Dude you look nothing like your avatar.

And as for that P10c OR....do it. Snagged mine and absolutely love it. Will probably dip into the CO game with the 507 I've currently got on it.

I got a sub $500 price on this one and Arms had the 507c on sale too.... one of those inbound.

This is for my EDC.
Shooting CO, this P10C makes sense fro me.

Now I gotta see if Vedder Holsters can accommodate an Olight

Posted: 12/24/2019 11:24:35 AM EDT

[#21]

I have the P10F OR as a backup for my P09. It's actually my second one. Had to send the first one back due to it occasionally going full auto on me. CZ said they couldn't fix it in a timely manner so sent me another one.

It's a great all around gun with an excellent trigger. I'm waiting on Primary Machine to stock P10F threaded barrels so I can shoot it suppressed. However, I still prefer my P09 more. Feels even better in my hands and I shoot it more accurately.

Posted: 12/24/2019 1:08:12 PM EDT

[#22]

found a sign for my gun caddy.....

Attached File

for reference....

Attached File

Posted: 1/10/2020 2:50:35 PM EDT

[#23]

Well, I dont know how much more I am going to do to this P10.
Still deciding if I want to tune it, but the rest is done

Attached File

Posted: 1/10/2020 2:54:00 PM EDT

[#24]

I did forget, sorry

Have had this P10 out to the range a few times so far.

Its everythign a CZ is supposed to be. Can put one raggedy hole @ 10 or so yards and with a better shooter, 25 yards.
Best I can do is about 1 -1.5" group at that distance.
Pretty sure my eyes are going south as I have to close one of them to do it

I really like it and now I may duck out out of work and go sight it in

Posted: 1/14/2020 11:06:23 AM EDT

[#25]

Collective input on how we should make this have some red in it.

Posted: 1/18/2020 12:12:41 PM EDT

[#26]

I saw a shadow 2 with red trigger and charcol/sniper grey cerakote. Saved the picture cause it looked so good.

Leave the slide and controls dark, red trigger with lok dual colored grips where the inner color is red so the very edge has a red trim to it.

Posted: 1/18/2020 10:56:50 PM EDT

[#27]

Quote History

Quoted:
Collective input on how we should make this have some red in it.

View Quote

Some red???

How about a lot of red!

I'm thinking red and black tiger stripe patterning, like the gold tiger striped Desert Eagle.

ETA: Which is what I planning on doing with my Mac-11 SBR once I get a side charging upper.

Posted: 1/19/2020 12:25:21 PM EDT

[#28]

OP, you could have gotten the SP01 Shadow Custom or just did had an S2 done. Would have been in the same price range.

Posted: 1/20/2020 2:14:27 PM EDT

[#29]

Since I have two SP-01 (One a Shadow 1), I think I will lay i tout as to where one is 100% the opposite of the other.

One:
From muzzle, across the top of the slide, down the back strap, up the finger area, under the slide (dust cover) and then the last 1" on the slide/frame.

One will be red with black, the other, black with red.

On the black frame sides, red controls, trigger, hammer, etc.. The other wold have black controls, hammer, trigger, etc.

One with red grips, gets a black frame, the one with black grips, gets a red frame.

Wish I had Photoshop to do it, but I do not and MS Paint would be stupid.

I think this may look pretty cool.

Posted: 1/20/2020 2:15:34 PM EDT

[#30]

Quote History

Quoted:
OP, you could have gotten the SP01 Shadow Custom or just did had an S2 done. Would have been in the same price range.
https://i.imgur.com/4hvXqVkl.jpg

View Quote

I see those exact guns every match i shoot.

I like to stand out in the crowd. Since I cant shoot as good as them, I can surely look cooler

Posted: 1/20/2020 5:44:56 PM EDT

[#31]

Quote History

Quoted:

I see those exact guns every match i shoot.

I like to stand out in the crowd. Since I cant shoot as good as them, I can surely look cooler

View Quote

If you want to stand out in the crowd shoot a Czechmate Parrot.

Posted: 4/14/2020 7:46:53 PM EDT

[#32]

Guess what?

well, aint that a bitch....

Attached File

Posted: 4/15/2020 1:46:51 PM EDT

[#33]

I am sending off both my main CO guns, so we need a back up to the back up.

The P1-C is a pretty good EDC, so lets play with a full size

Attached File

Came with 3 mags, and I bought a 4th.

I dont have a competition holster for this, so CompTac for the win along with 4 Hennings baseplates.

CZ USA is sending me an optics plate (2 actually).

I found a local fella selling a Holosun 507C at a good enough price.

Plastic Fantastic 3BO (3rd back up)

Posted: 4/15/2020 6:06:44 PM EDT

[#34]

Basepads and holster are in...w00t!

I really like the Henings pads.... just super easy to go on and off. They look good too!

Attached File

Posted: 4/16/2020 2:12:12 PM EDT

[#35]

plates came in.

Since I did not have the Holosun here, I stuck one of my SROs on it.

I think we are ready to go gaming with it.

Attached File

Posted: 4/18/2020 9:48:30 AM EDT

[#36]

Got to spend some time with this thing yesterday afternoon.

Its actually not too bad. CZ accuracy, meaning way more capable than I am.
Got the SRO zeroed (25 yards)

Then ran it through some quick fire on steel and some paper.
100% bone stock, and trigger is as such. She was plenty fast, easy to make transitions, draw, and was not too bad to manage recoil.
I ran some 147 gr subs at first. With stock springs, it functioned as should, but the recoil was a bit "sluggish". Not the slide, but overall.

Rolled some 124 JHP subs the night before, now these loads work really well in this pistol. Seemed to minimize the felt recoil much better.

Very easy to get a good double tap in the A zone. Good combo IMHO. Since I will be shooting this for a couple of months, and realizing I really like the 124gr better than the 147gr, this pistol may just work out pretty well.

Couple of the idiots I shoot with showed up and, well, it started. Someone break out a timer and the shit talking begins. Next thing you know, 50 yard and a steel plate gets brought up, right along with 100 yards and a plate rack.

Yes, the P10F has the ability to do this. I was using the 147gr and hit the 10" square at 50 with no issue.
Plate rack at 100....If I di my part, no problem.
1st plate got knocked over on the 2nd shot (standing shot), 2nd plate on the 3rd shot (from the bench).

So I would tell anyone to get this thing. Its pretty impressive.

I will take it on an actual match today. Lets see how it goes.

Posted: 4/24/2020 9:57:41 PM EDT

[#37]

2nd outlaw match with this plastic crap trigger pistol.

It really is not all that bad. I am not a huge fan of striker fired pistols, but I dont dislike them enough t to not own them.

This is what the pistol is capable of from a high B class shooter. I am 72% of the best in the country, which means I am pretty shitty

4_24_2020 Distancing match

https://www.youtube.com/watch?v=tj1fwD61DxM

Posted: 4/27/2020 8:20:00 PM EDT

[#38]

Quote History

Quoted:
2nd outlaw match with this plastic crap trigger pistol.

It really is not all that bad. I am not a huge fan of striker fired pistols, but I dont dislike them enough t to not own them.

This is what the pistol is capable of from a high B class shooter. I am 72% of the best in the country, which means I am pretty shitty

https://www.youtube.com/watch?v=tj1fwD61DxM

View Quote

Way better than me. I need to work on moving and shooting more.

Posted: 6/29/2020 2:51:02 PM EDT

[#39]

Thought I would drop an update, just out of sheer boredom.

Still have not received my SP-01 back from the miller

. Hopefully this week?

Got really tired of the P10F as a competition pistol, so have not been too motivated to shoot it an any matches. Its a great gun, but not for trying to blaze it fast.

I was browsing around some of the other gun forums and ran across a Shadow 2 that was all dolled up by Fire 4 Effects. Offered the seller a trade deal and he took it!

I have no completed my 75 Series Collection.

SP-01
Shadow 1
(a couple other 75 series)

and now a tricked out Shadow 2

Milled and topped with a DPP 2.5 MOA. I like it almost as good as the SRO. SRO has the win just because of the ease of use when making adjustments. Other than that the 2.5 MOA is adequate
Weight reduction milled .
Fully Cajunized with about a 3# SA and about a 4# DA pull.
It had some OK grips on it, but I like the LOK brass Palm Swells better.
I used one of my extra Nitro Fins in place of the stock slide stop. Took a LOT of fitting as the slide rails on the S2 are much thicker.
Replaced the 18# recoil spring with a 12lb. Tried to use the 9# but WAY too light on the S2. I am running 1025 FPS 124gr. right at 127 power factor.

I am very happy with it and this may be in a regular rotation for matches as it is pretty close to the other ones.

Attached File

Posted: 7/10/2020 9:29:03 PM EDT

[#40]

Since I feel obligated to enter crap here........

One thing I have found out is CZ is not very consistent with machining. The chamber on this barrel is TIGHT.

Cost me a 15 second penalty at a match this past weekend. I can visually tell on my case gauge what rounds will go and which ones wont..... so I thought.

Had one round get jammed up pretty good and had a time getting it out.

I did finish High 2 Gun Open though.

had a 2 place stage and a 6th place

10th overall.

I think this screw up cost me about 3 slots

Attached File

Attached File

I did make that gal just flat out moan though

Stage 5 July 5th CCC Multigun

https://www.youtube.com/watch?v=ovM5TL01cWg

Posted: 7/17/2020 8:59:17 PM EDT

[#41]

teaser

Attached File

Posted: 7/21/2020 3:43:46 PM EDT

[#42]

and gooo!

Attached File

Posted: 7/21/2020 3:46:23 PM EDT

[#43]

?????

Posted: 7/21/2020 3:48:06 PM EDT

[#44]

Quote History

Quoted:
?????

View Quote

Posted: 7/21/2020 5:31:34 PM EDT

[#45]

I dig it. Personally would have done a couple small parts black to contrast a little more, but damn good job!

Posted: 7/24/2020 9:51:46 AM EDT

[#46]

Took some time yesterday and gave her some quality finger banging.

I have really missed her. I did not realize that I like her and the Shadow 1 WAY better than the badass Fire 4 effects Shadow 2.

I did stick the brass grips on the gal, and she is a bit sexier.

I am going to build another Shadow 1 in the same fashion.

The Shadow 2 is going to go up for adoption.

Attached File

Posted: 7/25/2020 5:59:13 PM EDT

[#47]

I've always wanted to try a set of brass grips. My hands tarnish brass pretty hard though.

I think the dual tone Shadows look pretty neat. The slides are blued.

Posted: 7/26/2020 10:33:49 AM EDT

[#48]

First match with Red.

Well, both Reds....

We came in 5th of 31 teams (2 Man Team match) in the 2 Gun div.
19th of 55 overall

Not too shabby considering this is my 2nd ever match shooting a rifle.

Cinco De Plinko 2020

https://www.youtube.com/watch?v=OJXm00jQh40

Posted: 7/27/2020 3:16:16 PM EDT

[#49]

Quote History

Quoted:
Took some time yesterday and gave her some quality finger banging.

I have really missed her. I did not realize that I like her and the Shadow 1 WAY better than the badass Fire 4 effects Shadow 2.

I did stick the brass grips on the gal, and she is a bit sexier.

I am going to build another Shadow 1 in the same fashion.

The Shadow 2 is going to go up for adoption.

https://www.AR15.Com/media/mediaFiles/120021/20200723_195101_jpg-1517164.JPG

https://www.AR15.Com/media/mediaFiles/120021/20200724_082535_jpg-1517165.JPG

View Quote

That SP01 looks like Iron Man