When I got it the nightsight was in it.It had the stock SP101 grip and the funnel job on the wheel and had i will say a trigger job the springs were cut down so I ordered a action spring kit from Wolff gunsprings and put the 9lb. hammer spring and the reduced power hammer spring I also replaced both detent springs from Ruger the originals were cut and didn't work as smooth as the new ones.. Also sight has 01 on it so it was manufactured in 2001 it hasn't been in there long a year or so,The gloss finish can be put on by just buffing with Flitz
The only fault I can find with this gun is it won't shoot .357 magnums but for $65 Ricky devoid can cut the cylinder to take the 125 gr. 357 bullet all heavier will hang out the wheel to far and cylinder won't close...I am thinking about selling the .38 and buying a .357 magnum
GKSP-321XL Gloss Finish Stainless 357 mag 2" barrel and bobbed hammer and adding the Houge grips and the Wolff spring kit.
beretta92