Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 1/27/2006 4:29:31 AM EDT
Link Posted: 1/27/2006 5:39:17 AM EDT
Thr G22, G23, G27, and G35 will all convert to 9mm. Depending on the serial prefix they will convert to 357SIG also. The ones I've done have worked flawlessly, other that I have read about had to change the ejector to get it to run 100%. A close friend's G22 has several thousand rds of 9mm over the last couple of years. The G31, G32 and G33 will convert to 40 or 9mm as well.


Link Posted: 1/27/2006 6:18:38 AM EDT
Link Posted: 1/27/2006 6:38:21 AM EDT

Originally Posted By iNuhBaDNayburhood:
1) Is it just buying a standard barrel, or do you have to buy a "Conversion" barrel to get it to work?


To convert the G32 to 40S&W you just need factory G23 barrel(or a aftermarket G23 barrel). To convert the G23 or G32 to 9mm you need a conversion barrel.




And this will use the same mags?


You can use your G32 mags for the 40S&W but I like having my 40s marked 40.
9mm will need 9mm mags(G19, G17 or G18)



I'm assuming you have to buy specific barrel lengths given the specific model you're using, right?


Correct. The G32 will use a G23 barrel and vise-versa.
The 9mm conversion barrel will need to be for the G23 or G32

Both the G23 and G32 use the same size frame, slide mags e.t.c.


...I'm starting to think that the 32C (in the finish above) is just what the Dr. ordered for my first Glock.



I had the slide on the above G32C H.Chromed about 8yrs ago, they don't come that way from Glock.



Link Posted: 1/27/2006 7:53:51 AM EDT
[Last Edit: 1/27/2006 8:01:07 AM EDT by iNuhBaDNayburhood]
Link Posted: 1/27/2006 9:03:42 AM EDT
The 33 round mags will fit in the 32 frame. The G19 mags will fit flush with the 32 frame.
Link Posted: 1/27/2006 11:07:10 AM EDT
Link Posted: 1/28/2006 10:45:33 PM EDT
IIRC the 10mm models can also shoot different ammo with ease as well.
Top Top