User Panel
User Panel
User Panel
|
Posted: 4/19/2020 9:10:22 PM EDT
[#1]
Family pictures
 Attached File |
|
|
|
Posted: 4/19/2020 10:58:11 PM EDT
[#2]
Will a basic GGP17 do?
 |
|
|
|
Posted: 4/20/2020 6:36:44 PM EDT
[#3]
Quote HistoryQuoted: I've got another early v1 Poly 80 Spectre 940 that I'm going to build tomorrow. It has been sitting in the box since 2016 waiting for me to get around to it. Finally ordered a LWD lower parts kit. I will have to order a barrel, slide and upper parts kit next. Planning on doing this one in 9x19mm, Slide came in the mail today so I now have the upper completely assembled except for the sights which haven't been delivered yet. Planning on starting milling out the lower tomorrow. The parts kits came in on Fri. |
|
|
|
Posted: 4/21/2020 5:50:41 PM EDT
[#4]
Does anyone know what steel is used for the Rock Slide USA slides? The only thing I have found on their website is that they are Cerakoated in whatever color, but curious as to the rest of the stats on the slide steel, coatings and their barrel steel and coatings.
|
|
|
|
Posted: 4/22/2020 4:13:01 PM EDT
[#5]
Rock slide is Stainless steel.
|
|
|
|
Posted: 4/22/2020 4:18:24 PM EDT
[#6]
Thanks,that’s what I thought but could not find it anywhere.
|
|
|
|
Posted: 4/24/2020 9:36:48 AM EDT
[#7]
Quote HistoryThat's all you have?  Seriously, that is an impressive collection. I don't understand why Glock doesn't make them like that to start off with. The added beaver tail makes the biggest difference to me. |
|
|
|
Posted: 4/24/2020 9:23:35 PM EDT
[#8]
Just got 2 V1 compact kits in the mail. When did they stop coming with the end mills?
|
|
|
|
Posted: 4/24/2020 10:52:28 PM EDT
[#9]
Quote HistoryQuoted: Thanks,that's what I thought but could not find it anywhere. |
|
|
|
Posted: 4/25/2020 2:24:55 AM EDT
[#10]
No end mills starting this year. Never used them. Use tin snips a file.
|
|
|
|
Posted: 4/25/2020 5:28:31 PM EDT
[#11]
Quote HistoryQuoted: No end mills starting this year. Never used them. Use tin snips a file. I just use a zacto or case cutter (zacto is better) on the sides of the frame. Then snips and file for spring slot. |
|
|
|
Posted: 4/26/2020 2:00:47 AM EDT
[#12]
I got my OD green frame finished the other day. Two 15 round P-Mags and one Glock 17 mag. I ordered three KCI Glock 19 mags. Does anyone know if the HYVE baseplate will fit a KCI? (That is just Flitz on the dust cover. I didn't notice it until I uploaded to IMGUR).
I have a Zaffiri Precision getting Cerakoted this weekend Partiot Brown. I will post another pic when I get it together. 
|
|
|
|
Posted: 4/26/2020 5:05:34 PM EDT
[#13]
Quote HistoryQuoted: Does anyone know if the HYVE baseplate will fit a KCI? I don’t have Hyve baseplates, but I do have KCI mags and factory mags and the basepates are identical. I have a Dawson baseplate on one KCI mag and a couple of factory +2 baseplates on others and they all work fine. |
|
|
|
Posted: 4/26/2020 6:17:13 PM EDT
[#14]
 Attached FileJust finished this 23c. My first. Taking it out tomorrow for 100 rounds. I definitely learned a few things that I could do differently/better next time. I also didn't find MGB until after I had started, but thankfully I didn't screw anything up. after assembly I noticed the slide was pretty tight so I went back in and removed/cleaned up the channel a little bit and the slide lock spring wasn't fully seated in the front. After those two things were done it was much better. I also racked it about 300 times and used frog lube. I'm pretty happy with it. EDIT: I took it out today and put 135 rounds through it. I had 1 Failure to feed in the first mag, and 2 light strikes in the first 30 rounds. I had a hand full of times where the slide didn't fully seat into battery but it was about 99% of the way there and just took a little offhand thumb nudge to seat. I took it apart cleaned and lubed it, racked it a few more times and then had no more issues. All in all I'm pretty happy with it. It'll continue to be a range only gun until I get a few hundred more rounds through it and feel completely confident with having no issues. I'm also going to diamond bit some burs and imperfections, and green bit polish the channel a little more. EDIT #2: i got it home ran back through it with diamond bit and then polishing bits and mothers polish at the end. I then racked it a few hundred more times just to be thorough. Took it back out for another hundred rounds and it was flawless. At some point I was just able to enjoy it without concern. To say I'm very happy would be an under statement. I have a real sense of accomplishment. |
|
|
|
Posted: 4/27/2020 12:09:04 PM EDT
[#15]
I need a slide to complete a P80 19 build. Everything else is here and waiting. The frame is cobalt. What is a good color to go with the cobalt color? Bonus internet points for pictures!
|
|
|
|
Posted: 4/29/2020 8:14:08 AM EDT
[#16]
34 and 17, both on hybrid frames.
 |
|
|
|
Posted: 4/29/2020 11:50:55 PM EDT
[#17]
I just got the slide Cerakoted Patriot Brown.
 
|
|
|
|
Posted: 5/2/2020 8:24:49 PM EDT
[#18]
Quote HistoryOriginally Posted By joe___223: I just got the slide Cerakoted Patriot Brown. https://i.imgur.com/vQJMc3i.jpg https://i.imgur.com/mnUAJoB.jpg Very nice. Who makes the slide? |
|
|
|
Posted: 5/3/2020 12:59:11 AM EDT
[#19]
Quote HistoryOriginally Posted By subroc: Very nice. Who makes the slide? Quote HistoryOriginally Posted By subroc: Originally Posted By joe___223: I just got the slide Cerakoted Patriot Brown. https://i.imgur.com/vQJMc3i.jpg https://i.imgur.com/mnUAJoB.jpg Very nice. Who makes the slide? @subroc Zaffari Precision https://zaffiriprecision.com/product-category/glock-slides/g19-19x-g45-slides/g19-gen3/ I bought it from the link below, but they are out of the Glock 19 size slides: https://80pbuilder.com/zaffiri-precision-zps-p-complete-custom-kit-glock-17-g17 |
|
|
|
Posted: 5/3/2020 1:34:48 PM EDT
[#20]
A couple budget builds
The 17 has OEM parts kits on the upper and lower, a Swenson slide and barrel, a set of OEM sights and the Streamlight. This is earmarked to be a HD gun. The 19 has OEM parts kits on the upper and lower, a Thompson Leh CITADEL slide, an OEM gen 4 barrel that was a new take off that I picked up on eBay and a set of AmeriGlo GL-433 Hackathon sights. This will mostly be a range gun. The 17  The 19  |
|
|
|
Posted: 5/3/2020 2:04:55 PM EDT
[#21]
Quote HistoryQuoted: A couple budget builds The 17 has OEM parts kits on the upper and lower, a Swenson slide and barrel, a set of OEM sights and the Streamlight. This is earmarked to be a HD gun. The 19 has OEM parts kits on the upper and lower, a Thompson Leh CITADEL slide, an OEM gen 4 barrel that was a new take off that I picked up on eBay and a set of AmeriGlo GL-433 Hackathon sights. This will mostly be a range gun. The 17 https://i.postimg.cc/XJxngtBN/IMG-5147-2.jpg The 19 https://i.postimg.cc/5y0bKp8B/IMG-5175-2.jpg very nice! Have they been broken in yet? Any issues with either thus far? I finished a 23c in coyote last weekend, and have another new 19/23/32 frame in black that I was thinking about what I want to do with or trading for a 17/22 frame. |
|
|
|
Posted: 5/3/2020 2:29:14 PM EDT
[#22]
Quote HistoryOriginally Posted By former_usmc: very nice! Have they been broken in yet? Any issues with either thus far? I finished a 23c in coyote last weekend, and have another new 19/23/32 frame in black that I was thinking about what I want to do with or trading for a 17/22 frame. Thank you Me too. 1976 to 1980, Semper fi They have been to the range 2 times along with breaking in another pistol as well as sighting in a rifle and breaking that in as well. About 150 rounds through each. The 19 has run flaw free from the start and other than the front sight loosening/needing to be thread locked/tightened nothing to report. The 17 has had 2 instances of failing to lock the slide to the rear after the last shot with no other malfunctions. Extremely happy. Looking for fast break in and into service. How did the 23c run? Lot of good choices for the 19 frame. Plenty of good ones for a 17 frame as well. Enjoy the build. ETA: I was just looking through the above posts. Our builds have a similar look. Great minds. |
|
|
|
Posted: 5/3/2020 2:35:32 PM EDT
[#23]
Semper Fi
scroll up from your first post about 6 and there's mine. It had a few minor issues but nothing too bad. It was better than I expected for the first time out and I'm very happy with it so far after about 135 rounds. May go put another 100-200 tomorrow. Be safe and again, nice job! |
|
|
|
Posted: 5/3/2020 2:58:52 PM EDT
[#24]
Quote HistoryOriginally Posted By former_usmc: Semper Fi scroll up from your first post about 6 and there's mine. It had a few minor issues but nothing too bad. It was better than I expected for the first time out and I'm very happy with it so far after about 135 rounds. May go put another 100-200 tomorrow. Be safe and again, nice job! Very nice. Good luck with it. |
|
|
|
Posted: 5/6/2020 3:25:06 PM EDT
[#25]
I can finally post here. The final part came today.
|
|
|
|
Posted: 5/8/2020 2:15:23 PM EDT
[#26]
This Polymer 80 Spectre 940 V1 frame was sitting around my house for the past 4 years waiting to be finished. I finally got around to ordering all the rest of the parts.
 |
|
|
|
Posted: 5/12/2020 12:43:53 AM EDT
[#27]
Quote HistoryOriginally Posted By MoonDancer: I need a slide to complete a P80 19 build. Everything else is here and waiting. The frame is cobalt. What is a good color to go with the cobalt color? Bonus internet points for pictures! It's not an exact match, but cobalt goes nicely with midnight bronze. |
|
|
|
Posted: 5/12/2020 2:57:32 PM EDT
[#28]
Quote HistoryQuoted: It's not an exact match, but cobalt goes nicely with midnight bronze. https://imageshack.com/i/plS4Yqh8j |
|
|
|
Posted: 5/13/2020 10:41:10 AM EDT
[#29]
Quote HistoryOriginally Posted By 96Ag: Is that a coated OEM slide? Quote HistoryOriginally Posted By 96Ag: Originally Posted By AmateurLuthier: It's not an exact match, but cobalt goes nicely with midnight bronze. https://imageshack.com/i/plS4Yqh8j Brownells? |
|
|
|
Posted: 5/14/2020 1:32:55 AM EDT
[#30]
Quote HistoryOriginally Posted By 96Ag: Is that a coated OEM slide? Lone Wolf. |
|
|
|
Posted: 5/17/2020 5:23:05 PM EDT
[#31]
Built for my wife. After we get her comfortable with it, we will start her in the ccw permit process.
 Attached File |
|
|
|
Posted: 5/17/2020 8:55:39 PM EDT
[#32]
Today was the maiden range trip for the CL. No issues besides the ridiculous feature of BTF! Beyond that ran and feels great.
 Attached File Attached File |
|
|
|
Posted: 6/7/2020 4:14:18 PM EDT
[#33]
How about a 43 long slide. Also my first SS80 frame. Put 200rds though it works great.
 Attached File |
|
|
|
Posted: 6/23/2020 11:31:36 PM EDT
[#34]
|
|
|
|
Posted: 6/23/2020 11:33:39 PM EDT
[#35]
Quote HistoryQuoted: Lone Wolf. Quote HistoryQuoted: Quoted: Is that a coated OEM slide? Lone Wolf. |
|
|
|
Posted: 6/23/2020 11:34:58 PM EDT
[#36]
Quote History |
|
|
|
Posted: 6/24/2020 6:31:25 AM EDT
[#37]
Quote HistoryQuoted: That's awesome, slide maker? Lone Wolf. If you order a 34 slide, you have an option for the open top with no extra charge. |
|
|
|
Posted: 6/24/2020 10:33:37 AM EDT
[#38]
 Attached FileI don't think I posted this yet in this thread. P80 + slide kit from Brownells (slide Cerakoted S&W Grey) Glock frame kit Glock slide kit Grey Ghost Precision threaded barrel Trijicon suppressor height night sights Holosun 407A3 Magpul magwell Strike Industries extended mag plate Glock mag Olight PL-2 (Grey) I haven't shot it yet but everything seems good to go. |
|
|
|
Posted: 6/25/2020 8:26:28 PM EDT
[#39]
Anyone know of someone making G24 slides? I want to put one on a P80 frame.
|
|
|
|
Posted: 6/26/2020 5:28:55 PM EDT
[#40]
If you’ve subscribed to this thread and are thinking about getting a P80, now might be a good time to jump in despite the higher than normal pricing.
Being how this is a picture thread, please keep the discussion in the thread linked below located in GD. https://wtop.com/dc/2020/06/dc-sues-ghost-gun-maker-polymer80/ https://www.ar15.com/forums/General/DC-sues-Polymer80/5-2342292/ |
|
|
|
Posted: 6/26/2020 5:55:45 PM EDT
[#41]
Quote HistoryQuoted: If you’ve subscribed to this thread and are thinking about getting a P80, now might be a good time to jump in despite the higher than normal pricing. Being how this is a picture thread, please keep the discussion in the thread linked below located in GD. https://wtop.com/dc/2020/06/dc-sues-ghost-gun-maker-polymer80/ https://www.ar15.com/forums/General/DC-sues-Polymer80/5-2342292/ I wanted to but I can't find any OEM lpk let alone other pieces? |
|
|
|
Posted: 6/26/2020 10:38:48 PM EDT
[#42]
Quote HistoryQuoted: I wanted to but I can't find any OEM lpk let alone other pieces? @truedef Check this out. You may have to pick one part at a time. http://www.combatarmory.com/glock-internal-parts/ |
|
|
|
Posted: 6/27/2020 3:20:01 AM EDT
[#43]
Quote HistoryQuoted: Anyone know of someone making G24 slides? I want to put one on a P80 frame. Ive only seen one, Spinta Precision. Seems they make a bare G24 slide. |
|
|
|
Posted: 6/27/2020 7:03:03 AM EDT
[#44]
Quote HistoryQuoted: @truedef Check this out. You may have to pick one part at a time. http://www.combatarmory.com/glock-internal-parts/ I've read to stay with OEM glock parts. Is this not the case? I found a OEM glock lpk on gun broker... for $200. $200!  Attached File |
|
|
|
Posted: 6/29/2020 11:51:18 AM EDT
[#45]
Just added my RMR - Piston should arrive this week so I might actually be able to shoot it suppressed.
 Attached File |
|
|
|
Posted: 6/29/2020 1:09:59 PM EDT
[#46]
Quote HistoryQuoted: Just added my RMR - Piston should arrive this week so I might actually be able to shoot it suppressed. https://www.AR15.Com/media/mediaFiles/435028/17846196-6F7E-4DC5-BCA0-649ECD5A51D3_jpe-1481944.JPG That thing is mean looking 
|
|
|
|
Posted: 7/3/2020 2:22:20 PM EDT
[#47]
|
|
|
|
Posted: 7/5/2020 9:57:07 PM EDT
[#48]
Brownells 19L slide, PF9C Frame
|
|
|
|
Posted: 7/6/2020 8:17:36 PM EDT
[#49]
  I posted this one, the last one I finished and am loving it. It's a Glock 23c with a NiT barrel, and I've also added a 9mm barrel and a 357 sig barrel for it. I have another untouched black p80 PF940CV1 frame and oem 23 lpk that I've been deciding what to do. Build it or hold on to it for awhile. now I'm thinking about posting it in the trade for the same but in another color. I'm kind of digging the gray and the od green but not sure which way to go next. Anyone have one for trade they can shoot me pics of? |
|
|
|
Posted: 7/6/2020 8:35:47 PM EDT
[#50]
And I thought BRD was bad.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File