User Panel
I'll give the 43 and 19 barrels a try. I've always wondered what the 43 would be like suppressed.
|
|
|
The 34 barrel is ready to go! I'll be getting it packed up today. Canu, please shoot me your addy!
|
|
I am looking for a good threaded brl for the glock 19..... I use several cans
edit for a glock 42 threaded brl also |
|
Quoted:
I am looking for a good threaded brl for the glock 19..... I use several cans edit for a glock 42 threaded brl also View Quote We certainly have the 19 barrels in stock and ready to go out the door. If you'd like to test one I'd be happy to add you to the list. Just note that it may be a little bit of time till they make it to you as the lists are growing quickly. 42 Barrels are up in the air. Not sure if we'll do a run yet. |
|
Quoted:
We certainly have the 19 barrels in stock and ready to go out the door. If you'd like to test one I'd be happy to add you to the list. Just note that it may be a little bit of time till they make it to you as the lists are growing quickly. 42 Barrels are up in the air. Not sure if we'll do a run yet. View Quote OK no biggie on the 19 but if you do one for the 42 I would love to give it a go! |
|
Would you mind moving me to the bottom of either the 43 or 34 list? I am much more interested in either of those than the 17 or 19, and the 34 and 43 are both less common than the others (and I have several 34s to try one in).
Thanks! |
|
|
Quoted:
Would you mind moving me to the bottom of either the 43 or 34 list? I am much more interested in either of those than the 17 or 19, and the 34 and 43 are both less common than the others (and I have several 34s to try one in). Thanks! View Quote I'll move you to both. In your same position if I can figure it out. No reason to send you to the back |
|
Quoted:
Any updates from those with the barrels? View Quote I finally took mine out this weekend, the 17 barrel. Put about 15 mags through it. It shot fine, no failures at all. Fit and finish seemed tight. The only thing that drove me crazy was the thread protector kept coming loose. After about 6 round the protector would be halfway off. So every magazine I had to tighten it at least twice to prevent it from falling off. Highly annoying and is actually why I stopped shooting, had plenty of ammo left but I just got frustrated. I'll be contacting the next guy in line to pass it along EDIT: SilentKnight04 IMed |
|
Quoted:
I finally took mine out this weekend, the 17 barrel. Put about 15 mags through it. It shot fine, no failures at all. Fit and finish seemed tight. The only thing that drove me crazy was the thread protector kept coming loose. After about 6 round the protector would be halfway off. So every magazine I had to tighten it at least twice to prevent it from falling off. Highly annoying and is actually why I stopped shooting, had plenty of ammo left but I just got frustrated. I'll be contacting the next guy in line to pass it along EDIT: SilentKnight04 IMed View Quote My Storm Lake barrel in my 17 is the same way. I just leave the thread protector off when I'm shooting unsuppressed. |
|
Quoted:
I finally took mine out this weekend, the 17 barrel. Put about 15 mags through it. It shot fine, no failures at all. Fit and finish seemed tight. The only thing that drove me crazy was the thread protector kept coming loose. After about 6 round the protector would be halfway off. So every magazine I had to tighten it at least twice to prevent it from falling off. Highly annoying and is actually why I stopped shooting, had plenty of ammo left but I just got frustrated. I'll be contacting the next guy in line to pass it along EDIT: SilentKnight04 IMed View Quote My apologies for the protector. We really tried to focus on super clean threads without chatter. It's excellent for suppressors and comps (We tested it with nothing, and with suppressors/comps and didn't have any issues), but perhaps we need to add an o-ring or something inside the protector. I'll make the suggestion. I know when I personally have a threaded barrel I pull off the protector and leave it on my work bench. Even when I carry the guns I don't put the protector back on. Happy to hear that outside of that it worked well for you! |
|
No reply from SilentKnight04 yet so I'll give him another day and then I'll move onto the next person
|
|
|
This is so cool!
I will gladly try the Glock 17 Threaded barrel if you don't mind putting me on the list please! |
|
|
the thread protectors initially would come loose on my S3F barrels after a few rounds as well. Put a small Vitton O-ring at the base of the threads, screwed the thread protector back on hand tight, and they have not come loose in hundreds of rounds since. I have removed and reinstalled the thread protectors about 20x to remove the barrel for cleaning and the original o rings i put on still have no signs of wear and work like a charm. The thread protectors go over the O-ring so you dont even see them if you get the right size (which I dont recall off the top of my head)
|
|
Quoted:
the thread protectors initially would come loose on my S3F barrels after a few rounds as well. Put a small Vitton O-ring at the base of the threads, screwed the thread protector back on hand tight, and they have not come loose in hundreds of rounds since. I have removed and reinstalled the thread protectors about 20x to remove the barrel for cleaning and the original o rings i put on still have no signs of wear and work like a charm. The thread protectors go over the O-ring so you dont even see them if you get the right size (which I dont recall off the top of my head) View Quote If you happen to find / remember the size of the O-rings, let me know. |
|
I've already spoken with the powers that be. Looks like we're going to probably go that route. While we haven't experienced anyone losing a protector, we don't want to risk it. So as soon as we have the o-rings available we'll most likely be including them with every barrel sold.
Thanks for the feedback so far everyone! |
|
Review updated and G43 barrel is on to the next torturer, I mean tester!
|
|
Just making sure that you got my address for the g34 barrel idk if my IM went trough
|
|
|
Is it too late to jump on this?
I would be interested in the barrel for the G19. |
|
|
|
I've got both the 19 and 43 barrels.
Should be able to run a bit through them tomorrow or Wednesday and then get them sent off to the next guys on the list. They look good, strong rifling and I test fit a suppressor on both and the threads look to be well made an concentric |
|
Quoted:
I've got both the 19 and 43 barrels. Should be able to run a bit through them tomorrow or Wednesday and then get them sent off to the next guys on the list. They look good, strong rifling and I test fit a suppressor on both and the threads look to be well made an concentric View Quote Looking forward to the results! |
|
Quoted:
I've got both the 19 and 43 barrels. Should be able to run a bit through them tomorrow or Wednesday and then get them sent off to the next guys on the list. They look good, strong rifling and I test fit a suppressor on both and the threads look to be well made an concentric View Quote @Mikhail_86 if you don't mind, shoot me a text or phone call after you shoot. I'm needing a barrel for my 19 and 34 and interested in your thoughts on these compared to your current barrel. |
|
Quoted:
@Mikhail_86 if you don't mind, shoot me a text or phone call after you shoot. I'm needing a barrel for my 19 and 34 and interested in your thoughts on these compared to your current barrel. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I've got both the 19 and 43 barrels. Should be able to run a bit through them tomorrow or Wednesday and then get them sent off to the next guys on the list. They look good, strong rifling and I test fit a suppressor on both and the threads look to be well made an concentric @Mikhail_86 if you don't mind, shoot me a text or phone call after you shoot. I'm needing a barrel for my 19 and 34 and interested in your thoughts on these compared to your current barrel. Will do buddy. |
|
|
Quoted:
19 and 43 are ready to go. Just have to run home at lunch and grab my can. http://i37.photobucket.com/albums/e100/cd123kid/Mobile%20Uploads/B0A73E81-A552-4CC2-8DEC-23050CFF10C4.jpg View Quote What model rmr do you use? |
|
Quoted:
Quoted:
19 and 43 are ready to go. Just have to run home at lunch and grab my can. http://i37.photobucket.com/albums/e100/cd123kid/Mobile%20Uploads/B0A73E81-A552-4CC2-8DEC-23050CFF10C4.jpg What model rmr do you use? RM06 |
|
Quoted:
Put 100 rounds of American Eagle 124 Suppressor Subsonics through the 43, zero issues. Very acurate, was able to make tight little groups when I was trying. Pretty much blasted the rest. Suppressed 43 is awesome Another 100 through my G19 of Blazer Aluminum 115's. My 19 is finicky with the American eagle subs so I didn't bother. Zero issues out of either, they are dirty as hell now. I like em! @JohnnyPantz View Quote nice. I'll probably have to order a 34 barrel for extensive testing |
|
Quoted:
Put 100 rounds of American Eagle 124 Suppressor Subsonics through the 43, zero issues. Very acurate, was able to make tight little groups when I was trying. Pretty much blasted the rest. Suppressed 43 is awesome http://i37.photobucket.com/albums/e100/cd123kid/Mobile%20Uploads/46E698AA-7D44-4AC6-8C8B-1AED5E82FFE0.jpg Another 100 through my G19 of Blazer Aluminum 115's. My 19 is finicky with the American eagle subs so I didn't bother. Zero issues out of either, they are dirty as hell now. I like em! @JohnnyPantz View Quote VERY happy to hear you enjoyed them. |
|
|
I'm just curious to know what you're gonna do with all them used barrels
|
|
There's been a few people asking that and calling dibs on them.
Chances are we will sell them at a discounted rate if the lists die. Otherwise we'll just keep sending them out in hopes of them being completely put through their paces. |
|
There's a joke in there somewhere about being worn out and dirty.
|
|
Quoted:
There's been a few people asking that and calling dibs on them. Chances are we will sell them at a discounted rate if the lists die. Otherwise we'll just keep sending them out in hopes of them being completely put through their paces. View Quote I went ahead and ordered my own g34 barrel. don't worry, it will get tested, thoroughly. I'm not exactly easy on stuff |
|
Still haven't recieved the glock 34 barrel can i get a tracking number for it?
|
|
|
Is this still going on?
I have a Glock gen 4 19 and I'm interested. Thanks. |
|
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.