User Panel
User Panel
User Panel
NC, USA
|
Posted: 1/22/2017 12:25:18 PM EDT
[#1]
|
|
|
|
Posted: 1/22/2017 12:31:25 PM EDT
[#2]
Quote History I've been thinking about getting a Glock 43. That comp with a TLR-6 and a Taran basepad would be a pretty cool carry gun. I think the comp on the 43 would be more effective than on the 19.
|
|
|
|
|
Posted: 1/22/2017 12:38:04 PM EDT
[#3]
Quote HistoryYou are, and I just bought one for my Zev G43. 
|
|
|
|
NC, USA
|
Posted: 1/22/2017 4:09:17 PM EDT
[#4]
Quote HistoryOriginally Posted By Airborne_Infantryman:
You are, and I just bought one for my Zev G43. Nice. Please post pictures and give your thoughts on it. I need a better barrel for my G19 TBRCi comp before I get one for my 43. The Lone Wolf threaded barrel gives me about a centimeter of space in between comp and slide so I'm going to get a SilencerCo threaded barrel then I'll probably buy the G43 comp/Zev barrel combo for my 43. |
|
|
|
Posted: 1/22/2017 9:32:59 PM EDT
[#5]
Quote HistoryOriginally Posted By weaponoutfitters:
https://instagram.fsnc1-5.fna.fbcdn.net/t51.2885-15/e35/16123849_1655409604764741_1150331630737424384_n.jpg For folks who are running the taller Delta Point Pro with Iron Sights and the crazy 0.485" tall front sight required for co-witness, the Bawidamann "Gotham" IWB holster very adaptable and works with it. Like the VG3, it indexes off the X300 and fits almost any pistol that can also mount a X300. Unlike the VG3, it's reholster capable, and a bit more modular, adjutable, etc. Makes good use of the RCS claw the was first used on the Eidolon holsters. I love my Bawidamann holster... best one Ive tried so far for this configuration. Unfortunately the mag holder I ordered with it never came and I can't seem to get a hold of anyone over there. |
|
|
|
FL, USA
|
Posted: 1/23/2017 2:06:43 AM EDT
[#6]
I know Andrew has been at SHOT. I would expect a reply soon.
|
|
|
NC, USA
|
Posted: 1/23/2017 12:50:02 PM EDT
[#7]
Anyone got holster ideas for the G43 + Micro Comp?
Hopefully Trex Arms makes one compatible with TLR 6. |
|
|
|
Posted: 1/23/2017 1:19:33 PM EDT
[#8]
Couple pics from ATEI's booth at SHOT
|
|
|
|
|
Posted: 1/23/2017 11:40:34 PM EDT
[#9]
got my Dawson's in and installed!
For those of use running the DP pro instead of an RMR, Dawson makes a set of irons that offers an approx lower third co-witness. it's a .595 rear and a .585 front. they are taller than your standard suppressor sights so when ordering holsters, you'll need to specify a little extra room for the front sight. |
|
|
|
WA, USA
|
Posted: 1/23/2017 11:59:16 PM EDT
[#10]
Quote HistoryOriginally Posted By OsoGrande:
Couple pics from ATEI's booth at SHOT http://i.imgur.com/bAoxrFSl.jpg http://i.imgur.com/39py7G6l.jpg http://i.imgur.com/lpel1aOl.jpg The stippling looks really bad, looks like pores. |
|
|
WA, USA
|
Posted: 1/29/2017 2:38:08 AM EDT
[#11]
|
|
|
OH, USA
|
Posted: 1/29/2017 1:47:55 PM EDT
[#12]
Quote HistoryOriginally Posted By Fish1856:
got my Dawson's in and installed! For those of use running the DP pro instead of an RMR, Dawson makes a set of irons that offers an approx lower third co-witness. it's a .595 rear and a .585 front. they are taller than your standard suppressor sights so when ordering holsters, you'll need to specify a little extra room for the front sight. Do you have any pictures of your gun? I'm thinking about a DP Pro instead of an RMR. |
|
|
|
Posted: 1/29/2017 2:42:22 PM EDT
[#13]
Quote HistoryOriginally Posted By Chincy: congrats on the sweet blaster my WA brother from another mother. |
|
|
|
KY, USA
|
Posted: 1/29/2017 7:49:37 PM EDT
[#14]
Broke the DSLR out this afternoon and snapped a pic of my Roland-ish G17/Zev build.
|
|
|
|
Posted: 1/29/2017 8:41:16 PM EDT
[#15]
Quote HistoryOriginally Posted By Black-X:
Broke the DSLR out this afternoon and snapped a pic of my Roland-ish G17/Zev build. http://i1276.photobucket.com/albums/y473/Black--X/Zev_zpsovhbyecj.jpg I have that exact same Zev Dragonfly build and was considering that comp. Do you have any pics with the slide forward? |
|
|
|
|
Posted: 1/29/2017 9:13:23 PM EDT
[Last Edit: Fish1856]
[#16]
Quote HistoryOriginally Posted By RHR:
Do you have any pictures of your gun? I'm thinking about a DP Pro instead of an RMR. 
|
|
|
|
KY, USA
|
Posted: 1/30/2017 12:13:15 AM EDT
[#17]
Quote HistoryOriginally Posted By Airborne_Infantryman:
I have that exact same Zev Dragonfly build and was considering that comp. Do you have any pics with the slide forward? Sure, but it's just a regular iPhone pic so it's not near as nice as the DSLR pic above. 
|
|
|
|
Posted: 1/30/2017 12:25:06 AM EDT
[#18]
Quote HistoryOriginally Posted By Black-X:
Sure, but it's just a regular iPhone pic so it's not near as nice as the DSLR pic above. http://i1276.photobucket.com/albums/y473/Black--X/IMG_1056_zpsxkmkwqg2.jpg That's perfect. Thanks! Glad to see the Zev barrels don't have a gap with the Micro Comp. |
|
|
|
FL, USA
|
Posted: 1/30/2017 9:14:06 PM EDT
[#19]
So I got my slide back today after having the RMR installed. First thing I noticed my Safariland 6354DO seems to accept the gun and the ALS system is retaining it properly. I ordered it from holsterops.com this month. I wonder if Safariland has changed the design slightly as previously it was mentioned they need to be modified to fit.
|
|
|
WA, USA
|
Posted: 1/31/2017 1:04:04 AM EDT
[Last Edit: Chincy]
[#20]
Quote HistoryOriginally Posted By sevin8nin:
congrats on the sweet blaster my WA brother from another mother. Thanks man! Really trying to put some rounds down it this weekend. 
|
|
|
|
Posted: 1/31/2017 1:18:46 AM EDT
[Last Edit: SinistralRifleman]
[#21]
Last year Superstition Mountain Mystery 3 Gun introduced a new division called "Stealth" that allowed a pistol to have any accessories as long as it fit inside a specific box dimension with its magazine. It seems I unintentionally built a Roland Special trying to get the most advantage out of that box size. I had never heard of it until some people replied to my posts on Instagram. Interesting that when size/ease of carry is a concern similar conclusions were drawn to make the most effective package.  Lowlight Pistol Match 1-28-2017 |
|
|
|
|
Posted: 2/2/2017 10:18:51 PM EDT
[#22]
|
|
|
|
NC, USA
|
Posted: 2/8/2017 10:50:46 PM EDT
[#23]
My fo-land special. Still contemplating frame work.
|
|
|
|
Posted: 2/9/2017 1:46:17 AM EDT
[#24]
Quote HistoryOriginally Posted By SinistralRifleman:
http://i857.photobucket.com/albums/ab131/SinistralRifleman/Firearms/FC72167D-1F58-4799-A667-38686E016C62_zpsyd8uly31.jpg Last year Superstition Mountain Mystery 3 Gun introduced a new division called "Stealth" that allowed a pistol to have any accessories as long as it fit inside a specific box dimension with its magazine. It seems I unintentionally built a Roland Special trying to get the most advantage out of that box size. I had never heard of it until some people replied to my posts on Instagram. Interesting that when size/ease of carry is a concern similar conclusions were drawn to make the most effective package.  https://www.youtube.com/watch?v=YExjKI8UVLMWhat height front sight are you using? |
|
|
|
TX, USA
|
Posted: 2/9/2017 2:27:42 AM EDT
[#25]
SinistralRifleman,
I'm just thrilled and blown away, thank you for sharing! "Stealth" division seems to be what USPSA Modified could have been. My previous carry guns have been USPf and 5" 1911s, Imreally like how the Roland/Fauxland Special can be do-it-all, with G34 length, G19 grip, and better than G34 controllability/flatness. I'm doing my own G19.4-Fauxland and while it doesn't have to have its "own division", that Stealth division seems very smart! |
|
|
|
Posted: 2/10/2017 5:56:12 PM EDT
[Last Edit: weaponoutfitters]
[#26]
I'm daily carrying my Fauxland, and my pals in the military industrial complex are too hahhaha. 4 of us went to a local steel plate match running Roland/Fauxland type builds and squared off against actual open gun builds. Great times since we all did very well, and concealed carry to, and off the range.
Roland Special (G19 MOS) at Steel Plate Match Glock 19 with BALOR and RMR at steel plate match Casually plinking with 115 Gr, Freehand, Standing 
I'm definitely getting spoiled. I'm thinking of sending my slide to ATEi to get it milled and rollin with a stock G19 for a bit |
|
|
|
|
Posted: 2/19/2017 4:09:55 PM EDT
[#27]
Just purchased a Docter MRDS as the first piece of my soon to be Roland variant. Unsure if I should buy a normal 19 and throw the sight in a Dueck mount or go with an MOS and throw suppressor height sights on it. Any suggestions?
|
|
|
|
|
Posted: 2/20/2017 10:08:12 PM EDT
[#28]
Quote HistoryOriginally Posted By BePhreed:
Just purchased a Docter MRDS as the first piece of my soon to be Roland variant. Unsure if I should buy a normal 19 and throw the sight in a Dueck mount or go with an MOS and throw suppressor height sights on it. Any suggestions? The Dueck is more for retrofitting a gun you already have. If you don't already have a 19, the MOS may give you more flexibility. |
|
|
|
|
Posted: 2/20/2017 10:41:25 PM EDT
[#29]
Quote HistoryOriginally Posted By BePhreed:
Just purchased a Docter MRDS as the first piece of my soon to be Roland variant. Unsure if I should buy a normal 19 and throw the sight in a Dueck mount or go with an MOS and throw suppressor height sights on it. Any suggestions? MOS will be the cheapest route, but my plan is to find a cheap donor police trade in and use a Unity Tactical slide. Buddy of mine just bought a 19mos though and its really nice so I honestly may go that route because it's so much cheaper. |
|
|
|
|
Posted: 2/21/2017 8:36:53 AM EDT
[#30]
Appreciate the insight. I'll probably go with the MOS. If I end up liking it enough, I'll upgrade to an RMR.
|
|
|
|
|
Posted: 2/21/2017 3:07:32 PM EDT
[#31]
I went the cheap route and just milled a G3 for the RMR, is there any advantage to doing the front and top slide cuts? Or is it just for looks?
|
|
|
|
|
Posted: 2/21/2017 4:19:28 PM EDT
[#32]
Quote HistoryOriginally Posted By GreenBastard:
I went the cheap route and just milled a G3 for the RMR, is there any advantage to doing the front and top slide cuts? Or is it just for looks? I like them because that's where I grab to press check but for the most part they are just for looks. Spendiest forward cocking serrations ever!!!!
|
|
|
|
|
Posted: 2/21/2017 4:20:52 PM EDT
[#33]
Quote HistoryOriginally Posted By ALASKANFIRE:
I like them because that's where I grab to press check but for the most part they are just for looks. Spendiest forward cocking serrations ever!!!! |
|
|
|
|
Posted: 2/21/2017 6:08:16 PM EDT
[#34]
Anyone run a comp with no rmr?
I'm interested in just the barrel setup but no rds. |
|
|
|
|
Posted: 2/21/2017 6:11:24 PM EDT
[#35]
Quote HistoryOriginally Posted By Finslayer83:
Anyone run a comp with no rmr? I'm interested in just the barrel setup but no rds. We both shot the shit out of it before he got a Vortex for it. I would definitely not get the high sights if you never plan on mounting a red dot in it. |
|
|
|
|
Posted: 2/21/2017 6:31:07 PM EDT
[#36]
I used the KKM Pecision Roland Special compensated barrel on my G19 for several months before I purchased a Suarez slide cut for a Trijicon RMR and a Trijicon RM02.
It performed well. You would be happy with that combo. G19 with KKM barrel and compensator. 
With Suarez slide and RMR. 
|
|
|
|
|
Posted: 2/21/2017 6:56:55 PM EDT
[#37]
Awesome.
Thanks guys. So my 10-8 / .220 sight setup will be fine to use with it? |
|
|
|
|
Posted: 2/21/2017 7:20:26 PM EDT
[#38]
Quote HistoryOriginally Posted By Finslayer83:
Awesome. Thanks guys. So my 10-8 / .220 sight setup will be fine to use with it? any sights that currently work should work with the comp. lot of guys around here run them for our steel competitions |
|
|
|
|
Posted: 2/21/2017 7:38:42 PM EDT
[#39]
Looking at costs I guess the question is:
Kkm setup on one of my 19's Or Sell one of the 19's and get a 34 |
|
|
|
|
Posted: 2/21/2017 8:23:53 PM EDT
[#40]
Quote HistoryOriginally Posted By Finslayer83:
Looking at costs I guess the question is: Kkm setup on one of my 19's Or Sell one of the 19's and get a 34 honestly, ever since I built my Roland special, I haven't shot my 34. |
|
|
|
|
Posted: 2/21/2017 9:36:13 PM EDT
[#41]
Quote HistoryOriginally Posted By GreenBastard:
honestly, ever since I built my Roland special, I haven't shot my 34. Quote HistoryOriginally Posted By GreenBastard:
Originally Posted By Finslayer83:
Looking at costs I guess the question is: Kkm setup on one of my 19's Or Sell one of the 19's and get a 34 honestly, ever since I built my Roland special, I haven't shot my 34. You're a bad influence. Is KKM the way to go? Damn near $300 is a lot for a comp and barrel - any similar alternatives? |
|
|
|
|
Posted: 2/21/2017 9:46:04 PM EDT
[#42]
Quote HistoryOriginally Posted By Finslayer83:
You're a bad influence. Is KKM the way to go? Damn near $300 is a lot for a comp and barrel - any similar alternatives? Quote HistoryOriginally Posted By Finslayer83:
Originally Posted By GreenBastard:
Originally Posted By Finslayer83:
Looking at costs I guess the question is: Kkm setup on one of my 19's Or Sell one of the 19's and get a 34 honestly, ever since I built my Roland special, I haven't shot my 34. You're a bad influence. Is KKM the way to go? Damn near $300 is a lot for a comp and barrel - any similar alternatives? KKM is the only way to go if you want KKM performance. Nothing else I've tried performs or feels better quite like the KKM. |
|
|
|
PA, USA
|
Posted: 2/21/2017 10:41:11 PM EDT
[#43]
Quote HistoryOriginally Posted By ozgood03:
KKM is the only way to go if you want KKM performance. Nothing else I've tried performs or feels better quite like the KKM. Has anyone tried the KKM comp vs the TBRCi microcomp? Any appreciable difference in recoil reduction with one or the other? |
|
|
|
Posted: 2/21/2017 10:57:49 PM EDT
[#44]
Quote HistoryOriginally Posted By SilentDeath12886:
Has anyone tried the KKM comp vs the TBRCi microcomp? Any appreciable difference in recoil reduction with one or the other? Quote HistoryOriginally Posted By SilentDeath12886:
Originally Posted By ozgood03:
KKM is the only way to go if you want KKM performance. Nothing else I've tried performs or feels better quite like the KKM. Has anyone tried the KKM comp vs the TBRCi microcomp? Any appreciable difference in recoil reduction with one or the other? I've tried the KKM Roland barrel and the TBRCi microcomp with both a Lone Wolf barrel and Alpha Wolf barrel and neither of those compare to the KKM in any way. |
|
|
|
VA, USA
|
Posted: 2/21/2017 11:20:47 PM EDT
[#45]
Quote HistoryOriginally Posted By SinistralRifleman:
http://i857.photobucket.com/albums/ab131/SinistralRifleman/Firearms/FC72167D-1F58-4799-A667-38686E016C62_zpsyd8uly31.jpg Last year Superstition Mountain Mystery 3 Gun introduced a new division called "Stealth" that allowed a pistol to have any accessories as long as it fit inside a specific box dimension with its magazine. It seems I unintentionally built a Roland Special trying to get the most advantage out of that box size. I had never heard of it until some people replied to my posts on Instagram. Interesting that when size/ease of carry is a concern similar conclusions were drawn to make the most effective package. https://www.youtube.com/watch?v=YExjKI8UVLMThat. Was. Awesome. |
|
|
|
Posted: 2/21/2017 11:30:16 PM EDT
[#46]
Quote HistoryOriginally Posted By Beardsli:
The Dueck is more for retrofitting a gun you already have. If you don't already have a 19, the MOS may give you more flexibility. I would recommend against getting a MOS since it's a compromise solution (Sight mounted to a plate which is mounted to the slide), and really isn't as good as just paying the $160 to get a slide custom cut/fit to your specific RMR. The main benefit of getting the MOS is that you can mount a cheap red dot at first, then eventually mount a good red dot... thing is, a RMR or Delta Point Pro costs as much or more than the Glock! If you're gonna spend that much, might as well get the best solution. |
|
|
|
|
Posted: 2/21/2017 11:33:17 PM EDT
[#47]
Quote HistoryOriginally Posted By ozgood03:
I've tried the KKM Roland barrel and the TBRCi microcomp with both a Lone Wolf barrel and Alpha Wolf barrel and neither of those compare to the KKM in any way. Quote HistoryOriginally Posted By ozgood03:
Originally Posted By SilentDeath12886:
Originally Posted By ozgood03:
KKM is the only way to go if you want KKM performance. Nothing else I've tried performs or feels better quite like the KKM. Has anyone tried the KKM comp vs the TBRCi microcomp? Any appreciable difference in recoil reduction with one or the other? I've tried the KKM Roland barrel and the TBRCi microcomp with both a Lone Wolf barrel and Alpha Wolf barrel and neither of those compare to the KKM in any way. I've got a borrowed KKM roland slide and my own Micro comp setup: I've not really had a chance to shoot them back to back, but what were your findings in differences? I noticed both are sensitive to 115 gr plinkers and worked best with 124 and heavier. I'm thinking about putting in a guide rod into my Gen 4 and trying them head to head, but based on my experience with the two seperate they seem similar with slight differences in blast/flash. |
|
|
|
|
Posted: 2/22/2017 10:31:32 AM EDT
[#48]
|
|
|
|
|
Posted: 2/22/2017 10:22:19 PM EDT
[#49]
Some more stealth special action in this video
 2 Gun Action Challenge Match 2-18-2017 |
|
|
|
|
Posted: 2/22/2017 10:23:32 PM EDT
[#50]
Quote HistoryOriginally Posted By Fish1856:
What height front sight are you using? .470" IIRC |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File