I began with an optic and as most of you know some of the greatest builds start with a single item. I then found a decent Centry Golani for the sacrificial guts, I would hate to cut up a Galil and this one worked well.
I believe it has been worth it though I the end, I am pleased with the final product.
This has been a labor of love and has taken a bit of time to collect everything for this build. I would like to thank those that helped me with the hard to find parts.
I hope this is helpful to anyone that has been interested in these rifles.

Here is the collection of parts




[url=http://s1310.photobucket.com/user/ljspoon/media/image_zpsvoh6mwvd.jpeg.html][/URL

This is the trigger group along with the expansion nuts that hold it in. The plugs that go into the expansion nut have the Vektor logo on them.

[/url]

This is the safety that goes into the trigger group.

In for more thanks OP

Fitting the trigger into the shell

http://i1310.photobucket.com/albums/s657/ljspoon/image_zps6dkuxkdz.jpeg

The safety is a crossbolt and just blocks the trigger
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsbqzbhd3o.jpeg

Here it is installed in one half of the shell
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpslbwoi99x.jpeg

This is the barrel heat shield that is fitted into a recess towards the front of the shell
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsrhzzwda0.jpeg

This is an epoxy spacer that allows the barreled action to be removed from the shell, the spacer makes it so the muzzle device does not have to be removed
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsotiykiwc.jpeg

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpskpmg7fol.jpeg

This is the recess that the heat shield fits into
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsl0bj3ean.jpeg

Here is the heat shield installed
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsaw4svu3k.jpeg

Here is the half that has the operating rod installed
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsmw3atajs.jpeg

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsfvb2tbyi.jpeg

Here you can see the hole where the expansion plug fits in, these hold the trigger mechanism in place

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsjhzlrq4z.jpeg

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpshecswesl.jpeg

Here is the sleeve that the plug goes in

http://i1310.photobucket.com/albums/s657/ljspoon/image_zps2mgs2aes.jpeg

Here is a picture of how the plug works, prior to installation

http://i1310.photobucket.com/albums/s657/ljspoon/image_zps1equapzt.jpeg

Installed and ready to screw it together
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsieh6mpuc.jpeg

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpso3ewhvvg.jpeg

This is the friction wedge that holds the top cover to the shell
http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsyzda8wms.jpeg

http://i1310.photobucket.com/albums/s657/ljspoon/image_zps7z5vkmfw.jpeg

This is the recess that it fits into

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsnd52o5qk.jpeg

Here you can see how its fits in

http://i1310.photobucket.com/albums/s657/ljspoon/image_zps4xb97g0q.jpeg

Installed

http://i1310.photobucket.com/albums/s657/ljspoon/image_zps4yoxuer6.jpeg

You have to reuse the magazine catch for the build, latch and spring only

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsl7spz8rz.jpeg

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsyp8zgclj.jpeg

Here is the block that attaches to the barrel, there is a plastic riser that goes between this and the scope rail

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsndc5w7gc.jpeg

That is very neat  didn't know these kits were being imported.

There are no kits that I know of being imported. There were a few shells and parts that were brought in but it is the little pieces that are the hardest to find. This took a long while to collect the pieces. I still had to fabricate a couple.

Here it is completed

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpsgcr5gox8.jpeg

Here is a picture next to my Uzi for a size comparison

http://i1310.photobucket.com/albums/s657/ljspoon/image_zpspqjxt2mw.jpeg

Dear god that is sexy...one of my dream guns right there. Hit me up if you ever decide to sell! Great work and let us know how she shoots.

Excellent work!