Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/10/2006 6:28:07 AM EDT
[Last Edit: 3/10/2006 6:28:46 AM EDT by briang2ad]
Took her back to the range today, and the trigger reset problem was gone. The trigger does still feel rougher in live fire than in dry fire, but it worked. Let off was crisp enough to shoot 1.25" standing at 25 yards with Wolf HP. So... it has some decent potential. BUT, when firing the Wolf SP, the barrel seemed to 'over' heat. I have a post on this in ammo.
Link Posted: 3/10/2006 2:42:36 PM EDT
Did you notice any pronounced trigger slap?

Regards,
Gary
Link Posted: 3/15/2006 3:15:22 AM EDT
During dry fire the trigger is just "feeling" the fit between the trigger pin and trigger itself and the hammer spring sliding on the back of the trigger extensions. When cocked and ready to fire the trigger is sliding across the sear face of the hammer it is holding back and the above parts.

The trigger pin holes and bearing surface on the pin itself where the trigger rides can be cleaned well and lubed with a trigger type lubricant. The hammer sear surface can be "polished" up to make it less "gritty" feeling.

Don't sandpaper or file anything, by polishing I mean with a sharpening type stone. Sometimes just a real good cleaning and lubing can do wonders to a gritty trigger pull. Sometimes the trigger sear is sliding across a burr on the hammer sear and polishing this out can really help.
Top Top