Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 4/10/2006 6:03:30 PM EDT
is it pissible to take the slanted muzzle brake off of the wasr, if so can some one give me a detailed way of how
Link Posted: 4/10/2006 6:35:15 PM EDT
Its either silver soldered or pinned in place. Mine was soldered. Find out which yours is remove the pin or grind off the solder and spin loose. Remember that they are reverse threads so its righty loosey, lefty tighty.
Link Posted: 4/11/2006 12:28:44 AM EDT
mine has a silver pin like at the top of it in a groove on the brake
Link Posted: 4/11/2006 6:11:34 AM EDT
I dont believe its soldered on. Try depressing the pin, and twisting the brake off. Remember the threads are backwards.
Link Posted: 4/12/2006 4:31:23 PM EDT
I tried pulling out the pin if thats what "depress the pin means" but I couldnt pull it out, what exactly do I have to do? am I just not pulling to hard or should I take my dremel to the pin?

when I move the brake left and right the pin goes up and down so I dunno.
Link Posted: 4/12/2006 4:49:10 PM EDT
Don't pull on the pin - Push it in.
Link Posted: 4/12/2006 8:13:46 PM EDT
lol, ok
Link Posted: 4/12/2006 8:48:32 PM EDT
haha, I just pushed in the pin, and it worked, but as i was turning it right it was getting tighter, so i turned it left and it came off, either I dont knwo what left and right is or mine isnt reverse threads
Link Posted: 4/13/2006 12:47:59 AM EDT
Depress=push it in. Sorry if that wasn't clear enough. The threads should be backwards, try it again.
Top Top