Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 12/14/2005 5:53:42 AM EDT
I ordered my first AK from SOG last week. I got the WASR 10 with the folding stock. I don't really like the folding stock(black plastic thing) and want to put a wooden fixed stock on it. Is this a hand tool thing or does it require presses and rivets???
Link Posted: 12/14/2005 6:11:46 AM EDT
Unless it has some extra mounting hardware, it's just two screws on the top rear of the receiver.
Link Posted: 12/15/2005 2:32:18 PM EDT
[Last Edit: 12/15/2005 2:32:45 PM EDT by Parabellium]
sometimes it takes a little trimming of the stock as i had to do with a nice us made laminated stock. was close but needed some carveing with a sharp knife
Link Posted: 12/15/2005 7:26:23 PM EDT
hammer+ stocket extension + muscle = stock removed.
Link Posted: 12/16/2005 2:56:52 PM EDT

Originally Posted By Cigolon:
hammer+ stocket extension + muscle = stock removed.



My method exactly!
Link Posted: 12/21/2005 2:03:56 PM EDT
i tried to pry a crappy laminated buttstock off of my AK when i first got it (had a folder i was replacing it with) by putting a screw driver in the small gap between the wood and the receiver. about 2 minutes later the stock split almost perfectly in half from my attempts.

hammer it out from the back, dont pry it out like a dumbass(like me)!
Link Posted: 12/23/2005 7:00:31 AM EDT

hammer it out from the back


+1

Rubber mallet and a large blunt punch.
Top Top