Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Page AK-47 » Chinese
Posted: 12/29/2005 2:31:37 PM EDT
I recently got one of these rifles and want some info on the thread protector/muzzle nut.
I'm guessing it was installed for a importation shortcut. The spring loaded detent pin won't budge and the thing seems like it's attached really well. I can see threads in there just crying out to be free. Any information on this would help me out.
Link Posted: 12/30/2005 11:03:13 AM EDT
Please delete
I got the information I needed from Krinkfreak.
Link Posted: 1/1/2006 2:41:49 PM EDT
please share the info
Link Posted: 1/1/2006 5:07:18 PM EDT
From krinkfreak:
The detent pin is solid.

1. Press out the front sight base pin in the front.
2. Very carefully dremel and remove the protruding portion of the detent (solid) pin.
3. The muzzle nut should be able to rotate now and be removed. Remember, it is left-hand thread.
4. Take a scribe and insert it into the FSB hole and work the remaining portion of the solid pin out the front of the detent pin hole.
5. Purchase a new detent pin and spring and reinstall.
6. Screw muzzle nut or flash hider or muzzle break back on rifle.

Link Posted: 1/2/2006 11:40:18 AM EDT
Thanks!!

Page AK-47 » Chinese
Top Top