Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/12/2006 4:21:21 PM EDT
[Last Edit: 3/12/2006 5:28:13 PM EDT by Ligament]
Hi All,

I want to upgrade the safety lever to one than can be activated with the shooting index finger. This would go on an Arsenal milled SAM-5.

I see two options. Krebs has one and Black Jack Buffers makes one. I know Krebs is all about top notch quality and that sounds good to me.

The lower finger shelf on the Black Jack model would give increased leverage for the index finger and thus may be easier to operate.

The BlackJack is nice because it is notched to hold the bolt back. This will go on a milled Arsenal AK. Which would you recommend?

Krebs Custom:
http://www.krebscustom.com/CustomParts.html


Black Jack Buffers:
BJB S.W.I.F.T AK-47 Safety Levers - Notched
http://www.blackjackbuffers.com/index.php?main_page=product_info&cPath=66&products_id=202


Thanks!
Link Posted: 3/12/2006 4:26:33 PM EDT
You can buy either and make them fit....If it is for a stamped reciver all you have to do is use a small file to open up the notch where it engages the reciver...Not a lot of work
As to which one????
I like the Blackjack...Looks easier to maniplulate
Link Posted: 3/12/2006 5:26:33 PM EDT
This would go on a milled Arsenal SAM-5


Originally Posted By uxo2:
You can buy either and make them fit....If it is for a stamped reciver all you have to do is use a small file to open up the notch where it engages the reciver...Not a lot of work
As to which one????
I like the Blackjack...Looks easier to maniplulate

Link Posted: 3/12/2006 6:33:39 PM EDT
I've handled both. The Black Jack make is much easier.
Link Posted: 3/24/2006 7:42:24 PM EDT
ttt
Link Posted: 3/25/2006 3:52:14 AM EDT
Blackjack
Link Posted: 3/25/2006 6:39:35 AM EDT
[Last Edit: 3/25/2006 6:41:58 AM EDT by dntama]
I have had both. The blackjack is much easier to use. Power Custom also sells one that looks exactly like the one from Blackjack. Be sure to get the milled receiver version if that is what you have.
Link Posted: 3/25/2006 10:46:50 AM EDT
Not trying to high jack your thread, BUT is the safety hard to remove and do the notching, or can it be notched while on the rifle. my rifle is a Vector stamped rec. Thanks for any help.
Top Top