Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 2/23/2006 8:02:33 PM EDT
OK here is the situation. I have a weird combo here. AKS-74M1A1 5.56 Stamped Bulgarian which is I believe 74 pattern on the reciever but supposedly two different production runs, some were AKM pattern, some 74 pattern with 47 pattern carriers and 47 pattern but in 5.56 bolts. Now the trigger group is a standard 74 pattern that came in the rifle but has the hammer retarder cut down but only to keep a portion of the sear and catch together with that large weird hollow pin running through the center.

I am wanting to replace the HTS with something new but not sure if I go AKM pattern or 74 pattern but am guessing to stick with 74 pattern. Now what I am looking for is an original manufacture single hook trigger semi-group that doesn't need the annoying retarder to keep the whole thing together and preferably not Romanian or US made. The reason I am replacing is because I polished to much on the contact surfaces and it is a bit light for my taste- was looking at a drop in HTS original 74 but not really wanting the hammer retarder since it really doesn't do anything when not using anything in FA. Anyway suggestions on this would be appreciated.

Thanks,

Creeper
Link Posted: 2/23/2006 9:18:09 PM EDT
Never mind- just modified a standard double hook to fit. Should work perfect but it is now baking the in oven to cure the new finish.
Top Top