Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/1/2006 1:04:19 PM EDT
I'm changing to US made parts and I'm having trouble with the gas piston. Can't see any pin's, So I'm not sure why it does not want to unscrew. Please help. Thanks Dave
Link Posted: 2/1/2006 1:11:28 PM EDT
I had the same problem recently. You will have to remove the finish on your carrier and and you will see apin that is ground flat.
Link Posted: 2/1/2006 1:11:43 PM EDT
[Last Edit: 2/1/2006 1:12:34 PM EDT by tintedtahoe]
You might need to scrape some of the paint off......there is a pin in there.

ETA: Chinook beat me to it.
Link Posted: 2/1/2006 1:13:16 PM EDT
if it's a Century build/wasr, then it can't be taken off. They weld the piston to the carrier.
Link Posted: 2/1/2006 2:23:14 PM EDT
Well there must be a pin there because my piston wiggles but I can't see it, I filed down the paint and still can't see it.
Link Posted: 2/1/2006 8:28:23 PM EDT
It's there. I used a nail setter to get the pin moving then a center punch to finish tapping it out.
Link Posted: 2/2/2006 9:54:34 AM EDT
I found it, Thanks for the help.
Top Top