Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 1/29/2006 10:37:13 AM EDT

the FCG is totally different than the G2's on my other ak's. The latch that holds the hammer down gets in the way of the selector lever and i cant rotate it up to take it out. any ideas? I guess Ill have to take the FCG out so I get get the selector lever off.
Link Posted: 1/29/2006 10:39:40 AM EDT
how about moving the disconnector with your finger as you try to rotate the selector. or pull the trigger as you rotate it up
Link Posted: 1/29/2006 10:46:53 AM EDT

tried it, ahhhhh! looks like no way in hell its gettin past!
Link Posted: 1/29/2006 10:50:01 AM EDT
now is it catching the trigger itself or just the disconnector?
Link Posted: 1/29/2006 11:12:06 AM EDT
You either have to pull the FCG or rotate the selector backwards and lift it over the selector stop and rivets ...
Link Posted: 1/29/2006 11:22:52 AM EDT
I had the same problem with my Maadi, i had to pull the FCG to get the safety off.
Link Posted: 1/29/2006 12:39:07 PM EDT
a G2 FCG would fix the whole problem.
Link Posted: 1/29/2006 12:58:16 PM EDT

Originally Posted By paul_the_welder:
a G2 FCG would fix the whole problem.



I have a Maadi with a G2, I think you"ll still need to notch the flat on the selector ...
Link Posted: 1/29/2006 2:23:51 PM EDT

yeah its like 1/4 inch wide on the maadi selector. I looked at my sar-1's and its like half that. Your right , time to do alittle grinding.
Top Top