Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 8/28/2010 4:51:35 AM EDT
[Last Edit: 8/28/2010 10:32:23 AM EDT by fuatos]
I am getting ready to purchase an Ironwood stock and would like to see some of the finished projects... It's time to show off your work!!!

Also, are they marked anywhere "made in USA" or something like that to identify them?

I have a SA85-M that has an old FSE Walnut stock on it. It looks ok, but the buttstock needs to be replaced (its broken and I dont like the recoil pad). I am either looking to replace the entire stock set or just the butt with IWD's products. What do you think? If I replace the entire set, I'd be open for pictures and suggestions...



Link Posted: 8/28/2010 8:07:30 AM EDT
My only rifle with Ironwood furniture is my SSR-85 with Beech wood. I kept it simple, 5 or 6 applications of BLO:



Link Posted: 8/28/2010 8:12:53 AM EDT
SLR105






Z

Posted Via AR15.Com Mobile
Link Posted: 8/28/2010 10:12:44 AM EDT
[Last Edit: 8/28/2010 10:13:02 AM EDT by dfariswheel]
My Ironwood laminated on a Bulgarian AK-74 kit build.

The Russian Red color is Tandy water-based leather dye using a mix of Red, Yellow, and Cordovan.
Finish is Minwax satin polyurethane.

Link Posted: 8/28/2010 11:56:03 AM EDT



Link Posted: 8/28/2010 12:04:09 PM EDT


I want a FAL pretty bad. So far I have resisted taking the plunge, but it ain't easy. Pics like this don't help...
Link Posted: 8/28/2010 3:57:50 PM EDT

Romanian laminated

Bulgy Beech
Link Posted: 8/28/2010 4:08:44 PM EDT
Wow, that FAL furniture is beautiful. I didn't even know he made stuff for the FAL.
Link Posted: 8/28/2010 4:43:22 PM EDT
My first build: Betty





Custom Yugo with repeatable railed topcover and chrome Bulgy barrel: Bugolil

Link Posted: 8/28/2010 5:18:57 PM EDT

Originally Posted By Liquidmetal:


I want a FAL pretty bad. So far I have resisted taking the plunge, but it ain't easy. Pics like this don't help...


Moar: http://www.ar15.com/archive/topic.html?b=6&f=7&t=254077
Link Posted: 8/28/2010 7:29:48 PM EDT
[Last Edit: 8/28/2010 7:35:49 PM EDT by PreemptiveStrike]
Ironwood Walnut with 1 coat of Minwax Red Cedar stain followed by 25-30 coats of Formsbys tung oil on my NHM-90.
Here it is with the Hogue grip on(which is the best grip IMO)


And here it is with the wood grip

And all of the wood finished, prior to assembly

And a close up of the foregrip which had some "fiddlebacking"


I was on the fence about getting the fitted butt pad because I don't really like the looks of it but it does add some length to the stock which is why I ended up giong with it.

I also refinished my brothers WASR for him and made a thread about finishing the wood Here


If I remember correctly my stock was marked with a "IW" or "IWD" under the butt pad area but that is the only markings that I saw.

I really need to get some better pics in the sunlight to really show the grain and highlights in the wood.
Link Posted: 8/28/2010 7:58:34 PM EDT
[Last Edit: 8/29/2010 4:20:51 PM EDT by BigHunter27]
I also have a SA85M that I de-banned and put an Ironwood Beech Stock set onto. Unfortunately it's not here right now (barrel being threaded for brake) but I will see if I can dig up some pictures.

Edit- Unfortunately I dont have any pics and the gun is at the gunsmiths right now
Link Posted: 8/28/2010 8:49:21 PM EDT
I'm too picky. I want the Ironwood black laminate sooooo bad but I also want it in Warsaw length with a trapdoor. :(
Link Posted: 8/28/2010 9:05:36 PM EDT
Since when does Ironwood offer black laminate?

You sure your not talking about the Tapco wood?

In that case, the trapdoor is a possibility

I added it to my Tapco stock on my custom AK45R build



Link Posted: 8/28/2010 11:40:42 PM EDT
[Last Edit: 8/28/2010 11:45:49 PM EDT by vecdran]
Yay, another thread to uselessly whore her out in.

IWD Hard Rock Maple, Watco Danish Oil - Natural. Mak-90 Milled.

Going to say...around 12 coats. The first two days I did 4 or so applications back to back with 45min-1hour dry times. After that, it was 24 hours between each coat.





Besides penciled in names and identification keywords, the only other markings is the IWD stamped into the back of the stock.
Link Posted: 8/29/2010 4:45:52 AM EDT
[Last Edit: 8/29/2010 4:50:08 AM EDT by grimhollow]
Link Posted: 8/29/2010 1:47:31 PM EDT
Here's my IWD stock set. I believe it has a hardwood birch buttstock and beechwood handguards, with Tung Oil and Shellac.










Link Posted: 8/29/2010 1:52:55 PM EDT



Link Posted: 9/4/2010 12:32:01 PM EDT
[Last Edit: 9/4/2010 2:36:24 PM EDT by slimslade]
Cool.

Here's my "customized" PSL with IWD furniture.
Link Posted: 9/4/2010 2:01:34 PM EDT
Only the buttstock is Ironwood. Rest of it is original Russian wood.

CSF







Link Posted: 9/4/2010 5:04:24 PM EDT
Ironwood PG's on both:

Link Posted: 9/4/2010 9:18:53 PM EDT
Link Posted: 9/5/2010 8:01:28 AM EDT
Link Posted: 9/5/2010 3:17:42 PM EDT
Originally Posted By TX-Zen:
SLR105

http://zenphotos.net/file/Online/SVD/SLR105A1/SLR015A1_Blonde_008.JPG




Z

Posted Via AR15.Com Mobile


beautiful
Link Posted: 9/5/2010 3:38:15 PM EDT



Top Top