Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 2/21/2006 8:44:11 PM EDT
I have a ORF Bulgarian sidefolder kit that is a just a little different than the Romy's that I have taken down.

There is a button underneath the front trunion, how is the scrap sheetmetal receiver removed with that button?

Also, how is the rear stock taken down to remove the button?

thanks,
Ron
Link Posted: 2/21/2006 10:29:26 PM EDT

Originally Posted By DoctorCheney223:
I have a ORF Bulgarian sidefolder kit that is a just a little different than the Romy's that I have taken down.There is a button underneath the front trunion, how is the scrap sheetmetal receiver removed with that button?Also, how is the rear stock taken down to remove the button?thanks,
Ron



The button you refer to is the pin that holds the front latch for the folding stock, to demill simply remove all rivet heads and pry the old receiver off the trunnion. That pin is held in by the spring. for the stock, simply drive out the attaching pin, its a small dowl pin right at the hinge, drive it out from the buttom up. To remove the locking latch, take some needle nose pliers and comepress the spring, once compressed you will see a little pin, remove the pin (upwards) and the latch will come right out, be carefull that spring is under tension and will fly if provoked. McM
Link Posted: 2/22/2006 6:43:16 AM EDT
Thank you my man!

thanks,
Ron
Top Top