Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 12/21/2005 11:08:20 AM EDT
Could using the MGI buffer cause problems chambering the first round using the bolt release? Or would it be a recoil spring issue?

The round gets only partially out of the magazine. Tapping the foreward assist chambers the round. Problem occurs with various mags, whether fully loaded or partially depleted, all with Magpul followers.

No buffer binding detected, and after chambering the first round it will run fine and lock back when empty.

Not that it matters, but upper is rifle-length MRP with 14.5" CL barrel. Buttstock is Magpul M93B.
Link Posted: 12/21/2005 12:09:13 PM EDT
Link Posted: 12/21/2005 7:47:31 PM EDT
[Last Edit: 12/21/2005 7:47:51 PM EDT by vandal]
Well now at home I can't replicate the problem. Maybe the temperature was contributing to the problem. (46 degrees F, not too bad).

I put the old buffer back in and will see if the problem reoccurs at my 1/1/06 carbine match. I needed to put this gun on a diet anyway, and going back to the regular buffer saves me almost 1/3lb! It's a semi-auto gun anyway, and front-end heavy (rifle-length MRP) so I could probably do without the MGI buffer.
Top Top