User Panel
User Panel
User Panel
|
Posted: 7/28/2021 2:06:40 PM EDT
[#1]
Quote HistoryOriginally Posted By Jackal-FnM:  Weird, no where does he say anything about the camo... The lower is in reference to MY picture above the post with the KE Arms lower... MY picture has the Reptilia grip and it also has an Aero upper. The lower is made for Ballistic Advantage by Aero since the are sister companies.... Quote HistoryOriginally Posted By Jackal-FnM: Originally Posted By Jonny1904: Originally Posted By Jackal-FnM: Originally Posted By Jonny1904: Originally Posted By Jackal-FnM: Reptilia grip is AWESOME! The lower is technically Aero as well. Made for their sister company. That's a KE Arms lower, so technically no. Look at the post above that, he made a comment about the Reptilia grip and Aero upper. Unless someone managed to add a Reptilia grip to the KE Arms lower. Oh I did, I was able to read it correctly both times. He commented on the camo lower and upper combo while stating that he would want a Reptilia grip for his next build. You said that the lower was technically an Aero. It's not. In bold: your words, not mine. Originally Posted By Revryac: That is an awesome grip and big fan of aero uppers! Thinking of doing a Reptilia corp grip for my next build. Weird, no where does he say anything about the camo... The lower is in reference to MY picture above the post with the KE Arms lower... MY picture has the Reptilia grip and it also has an Aero upper. The lower is made for Ballistic Advantage by Aero since the are sister companies.... There's two pictures with Aero upper pictures. At this point I would just agree to disagree and move on. Which is what I am doing now. Later. |
|
|
|
|
Posted: 7/28/2021 9:54:53 PM EDT
[Last Edit: eddster]
[#2]
https://imgur.com/a/GHoCJh6
Top; M4E1 upper/lower; AAC marked URX 3.1 & Centurion Arms CHF 14.5" midlength 5.56 barrel. Larue 2 stage trigger. Radian Talon selectors. Burris RT6 1-6 in a LT204 (now with a Holosun 407c mounted offset). Surefire M300 Scout on the other side w/ pressure pad. B5 Bravo stock & A5 buffer tube. Pistol is Aero M4E1 receivers; BA Hanson 11.3" barrel. DD 10" Lite II rail. Aimpoint Comp M2 in a LT150 mount. DD fixed BUIS. Surefire G2X LED light in an IWC mount. Larue 2 stage trigger. Magpul brace until it gets Form 1'd. VCAS slings on both carbines. |
|
|
|
USA
|
Posted: 8/3/2021 1:04:09 PM EDT
[#3]
99% done with this. Changing out the grip to MOE+ and painting the mount and scope to closer match the rest of the theme.
Radian 10.5" Builders Kit in ODG Geissele ACH ODG Criterion 13.9" barrel + P&W Warcomp to 16.1" SRC Carrier + Headspaced BCM bolt Superlative Arms GB pinned Ergo F93 originally FDE but painted Army Green Armaspec SRS buffer + custom spacers Sparrow Dynamics Mag Release (custom fitted to Radian since it's dimensions are different) Hiperfire X2S MOD-3 Trigger ADM mount PA 1-6 LPVO MBUS PRO  |
|
|
WY, USA
|
Posted: 8/22/2021 2:31:15 AM EDT
[#4]
Getting a little closer, still need scope, scope mount, bipod, sling, steel qd sling mount, and then it should be basically be done:
 Ballistic Advantage M4E1 (made by Aero) lower Ballistic Advantage SPR 18” Barrel Aero Precision Enhanced Buffer Tube Aero Precision non-forward assist M4E1 upper Aero Precision Black Nitride BCG B5 Bravo Butt Stock Vltor Charging Handle Knights Armament 200-600 BUIS POF Enhanced Bolt Catch Brownells Inc (Midwest Industries) Free Float Rail Yankee Hill Machine Folding Front Sight Gas Block Yankee Hill Machine QD Flash Hider |
|
|
OK, USA
|
Posted: 9/1/2021 8:02:02 PM EDT
[#5]
Quote HistoryOriginally Posted By Jackal-FnM: Yankee Hill Machine Folding Front Sight Gas Block Have you had a chance to use one of these? How do you like it? |
|
|
|
Posted: 9/1/2021 8:44:10 PM EDT
[#6]
|
|
|
|
ID, USA
|
Posted: 9/2/2021 7:11:45 PM EDT
[Last Edit: Arnery]
[#7]
1st post, 1st AR-15. Bare bones, but decent quality. < $850 invested.
Aero Precision receivers, Quantum HG and buffer system. Rosco SS 13.7" 223 Wylde "Sauce pack", w/BCG & gas parts. Rise Rave 140 trigger & LPK. Vortex Sparc AR SB brace & Magpul Shoots soft & damn nice!  . |
|
|
|
Posted: 9/3/2021 8:19:27 PM EDT
[#8]
My first attempt at a camo paint job.
- 80 lower build - pencil barrel 16" - blasted all parts, base coat magpul OD green, let flash, covered with laundry bag and erratically covered with tan spray paint   
|
|
|
|
|
Posted: 9/3/2021 8:48:21 PM EDT
[#9]
|
|
|
|
NY, USA
|
Posted: 9/11/2021 11:57:11 PM EDT
[Last Edit: Guido_Torpedo]
[#10]
 SLR B15 billet set SLR Ion HDX 9.7 rail Rainier Nicken boron BCG Ballistic Advantage barrel 10.5 SLR Adjustable gas block Geissele SDenhanced trigger VLTOR A5 buffer parts h2 Springco green buffer spring Forward Controls endplate/Castle nut B5 Sopmod bravo stock B5 pistol grip Radian raptor SD charging handle Radian talon 45deg safety Trijicon MRO on Reptilia 1.93 mount Steiner Dbal D2 Modlite PLHv2 on Reptilia torch mount (waiting on a tailcap) Haley strategic D3 sling magpul forgrip/ railcovers surefire muzzle brake/ Socom RC2 |
|
|
|
Posted: 9/23/2021 2:11:43 PM EDT
[Last Edit: DarkJoker33]
[#11]
Does a parts picture count?
If so: Compiled parts Parts list Sharpes bros livewire lower Sharpes bros upper Sharpes bros lightweight handguard 18 inch ballistic advantage spr .223 wylde stainless steel barrel Spikes tactical melonited stainless steel gas tube Strike industries collar adjustable gas block Fab defense folding backup sights Blitzkrieg tritium chevron front sight Surefire warcomp Surefire warden Fab defense spike m bi pod Fab defense vts grip Cmmg ambi mag release Phase 5 bad lever Odin works extended mag release Iron city rifle works titanium take down pins, trigger pins and firing pin Triggertech 3.5 lb fixed competitive trigger Triggertech ambi safety selector Bootleg adjustable gas bolt carrier group Patriot ordinance factory roller cam pin Unique AR hand grip Habu charging handle w/arachnigrip Dpm systems adjustable carbine buffer assembly Primary weapon systems enhanced buffer tube w/ratcheting castle nut Fab defense gl shock stock Fab defense mono-pod butt stock add on Aero precision ultra light scope mount Bushnell illuminated 6x24x50 match pro scope w/sunshade  
|
|
|
|
USA
|
Posted: 9/26/2021 7:43:33 PM EDT
[#12]
Mill spec buffer Magpul furniture Fortis adjustable gas block Odin works mag extender Radiant raptor charge handle Odin works billet upper Sharps bros warthog lower Fostech nickel boron low mass BCA Ballistic advantage stainless fluted barrel Aero precision enhanced hand rail Crimson trace 301 railmaster light/laser Fortis control muzzle and brake Fortis ambidextrous safety Geissele super dynamic combat trigger Magpul backup folding sights Eo tech exps2 Magpul ms4 qd sling First complete build and it was a lot of fun. I learned a lot and am looking forward to the next ones. It’s kind of a Frankenstein and I’m sure I will change things around but it’s a fun shooter. |
|
|
|
Posted: 9/29/2021 11:08:39 AM EDT
[#13]
@Ohio_556. Nice build. Where did you get the little tiny ar15?
|
|
|
|
GA, USA
|
Posted: 10/9/2021 8:32:37 AM EDT
[#14]
|
|
|
|
Posted: 10/12/2021 5:46:16 PM EDT
[Last Edit: Bishopn87]
[#15]
First new toy in a long while:
Wilson Combat upper and lower 18" Odin Works .223 Wylde DMR barrel Odin Works tunable gas block Aero Precision rifle length gas tube Surefire SOCOM brake Geissele Mk16 handguard, 15" Geissele Airborne charging handle FailZero EXO bolt Geissele SSA-E trigger Balance of lower parts - Seekins Precision CMMG A1 stock kit California compliance BS grip by Monsterman, which is... remarkably not-awful. Crimson Trace CMR-301 light/laser Optic is (for now) Vortex Strike Eagle II 1-8 in an American Defence Recon QD mount. It's going to get moved over to a PSA upper once I decide what I actually want to put on this one long-term. Also have an ATN XSight Pro 4K in a QD mount that moves around from rifle to rifle. Magpul M-Lok sling mount, because there's a Harris bipod that goes with the XSight. Still need to get a sling, but haven't decided what I want on that, either. 
|
|
|
|
OH, USA
|
Posted: 10/12/2021 6:08:51 PM EDT
[#16]
Quote HistoryOriginally Posted By Tmcgahe2: https://live.staticflickr.com/65535/51567522027_b70340f4df_k.jpgE96C02D9-AFD8-4804-AD1E-ED383B7096B6" target="_blank">https://live.staticflickr.com/65535/51567522027_b70340f4df_k.jpgE96C02D9-AFD8-4804-AD1E-ED383B7096B6 TRIARC 13.9 + AXTS(Radian) nice lookin rig, how did you mount (what looks like a Harris) bipod to the bottom of your rail? |
|
|
GA, USA
|
Posted: 10/12/2021 8:25:39 PM EDT
[#17]
Yup it’s a Harris bi-pod. I used the Magpul Mlok bi-pod mount. Works fantastic and I can quickly change the bi-pod between multiple guns.
|
|
|
|
Posted: 10/12/2021 11:21:43 PM EDT
[#18]
Quote HistoryOriginally Posted By Bishopn87: First new toy in a long while: Wilson Combat upper and lower 18" Odin Works .223 Wylde DMR barrel Odin Works tunable gas block Aero Precision rifle length gas tube Surefire SOCOM brake Geissele Mk16 handguard, 15" Geissele Airborne charging handle FailZero EXO bolt Geissele SSA-E trigger Balance of lower parts - Seekins Precision CMMG A1 stock kit California compliance BS grip by Monsterman, which is... remarkably not-awful. Crimson Trace CMR-301 light/laser Optic is (for now) Vortex Strike Eagle II 1-8 in an American Defence Recon QD mount. It's going to get moved over to a PSA upper once I decide what I actually want to put on this one long-term. Also have an ATN XSight Pro 4K in a QD mount that moves around from rifle to rifle. Magpul M-Lok sling mount, because there's a Harris bipod that goes with the XSight. Still need to get a sling, but haven't decided what I want on that, either. https://www.ar15.com/media/mediaFiles/220017/new_AR_build-2127541.png One of the best looking CA compliant rifles I've seen. Solid build. |
|
|
|
TX, USA
|
Posted: 10/13/2021 10:52:29 AM EDT
[#19]
Kino Build for the truck
12.5" CMMG Kino barrel with carbine gas and pinned FSP Griffin Armament TM 3 prong flash hider Aero Precision Lower with coated FCG SB tactical pdw brace Vltor FDE Upper Spikes Nickel Boron BCG BCM midlength handguard 
|
|
|
TX, USA
|
Posted: 10/15/2021 9:23:56 AM EDT
[#20]
 This is my first post on here, so I may be doing this incorrectly. I built this budget Anderson for my Dad this year. I think it turned out pretty nice. |
|
|
TX, USA
|
Posted: 10/15/2021 10:04:16 AM EDT
[Last Edit: ericthetexan]
[#21]
.............
|
|
|
|
Posted: 10/16/2021 2:47:40 AM EDT
[#22]
Quote HistoryOriginally Posted By ericthetexan: https://hosting.photobucket.com/images/i/woosaw82/IMG_5896_LI.jpg This is my first post on here, so I may be doing this incorrectly. I built this budget Anderson for my Dad this year. I think it turned out pretty nice. Nice, shows up for members. You get to see it after 50 posts I believe. CD |
|
|
|
PA, USA
|
Posted: 10/19/2021 3:19:10 PM EDT
[Last Edit: SmittyG]
[#23]
 Old lower I had pieced together circa 2011ish. Just swapped this barrel to the upper and added the RIS II and Elcan recently. Noveske stripped upper and lower Colt upper and lower parts Norgon Ambi Catch Colt 6921 barrel assembly w/ shaved FSB KAC M4QD LMT Enhanced BCG BCM Gunfighter CH DD RIS II KAC Taupe panels/grips B5 SOPMOD KAC Micro BUIS Elcan SpecterDR 1-4x |
|
|
FL, USA
|
Posted: 10/23/2021 9:05:42 AM EDT
[#24]
Takedown rifle inspired AR15 pistol
https://youtube.com/shorts/CBd60YBGW_E?feature=share |
|
|
TX, USA
|
Posted: 10/23/2021 9:18:32 AM EDT
[#25]
|
|
|
|
Posted: 11/1/2021 12:52:33 PM EDT
[#26]
 This will go well with PSA's "Let's Go Brandon!" lower. |
|
|
|
|
Posted: 11/14/2021 1:30:59 PM EDT
[#27]
Quote HistoryOriginally Posted By leaveyourego: Have you had a chance to use one of these? How do you like it? Quote HistoryOriginally Posted By leaveyourego: Originally Posted By Jackal-FnM: Yankee Hill Machine Folding Front Sight Gas Block Have you had a chance to use one of these? How do you like it? Sorry for the late response, works well and I like it! |
|
|
|
|
Posted: 11/15/2021 12:17:49 AM EDT
[Last Edit: TheQuadfather]
[#28]
This started out as a lightly used LE6920 in summer 2019. I ran it with the stock handguards for a short while and then put on a BCM 7” quad rail. Stayed that way for about 17K rounds, got it pretty hot and generally ran the piss out it and the barrel was getting shot out.
So I bought a take-off Colt 6920 OEM-2 barrel and a DDC Geissele MK14 on the EE because I wanted rid of the 7” rail. And then I had to FDE all the things and now the only thing left of the original gun is the carrier.   |
|
|
|
NV, USA
|
Posted: 11/15/2021 3:18:03 AM EDT
[#29]
 Current configuration of my original 2005 build. Swampfox Arrowhead 1-10X24 illuminated BDC MOA LPVO on Warne aluminum QD lever mount, LaRue Tactical IndexClips rail cover, KAC Micro 200-600M rear BUIS, BCM Gunfighter ambi medium latch charging handle gen 2, B5 Systems Enhanced SOPMOD stock and Bobro-GG&G gen 1 aluminum bipod.  2010 Nikon 3-9X40 BDC hunting optic on LaRue Tactical SPR/ M4 LT104 QD lever mount, Magpul BAD lever and BCM Gunfighter ambi medium latch charging handle gen 1.  2007 configuration Aimpoint CompM2 M68 on LaRue Tactical LT129 cantilever QD lever mount, Troy rear BUIS, VLTOR EMOD stock, Magpul PMAG gen 1 and Vickers BFG padded 2 point sling.  2005 original build configuration: Barrel: 16 inch midlength gas system, medium contour, CMV mil-spec, chrome lined, 1/7, 5.56 NATO chamber, M4 feedramps Flash suppressor: Phoenix spiral slots discontinued - new model sold now by Liberty Suppressors Rail system: LaRue Tactical 9 inch free floating Vertical Forward Grip: TangoDown Upper receiver: Colt Mfg. M4 type Rear BUIS: Knight's Armament Co. 300M Lower Receiver assembly: Colt model AR6721 AR-15A3 Tactical Carbine Mag catch: Norgon ambi Anti rotation hammer & trigger pins: KNS Precision Selector-safety: LMT ambi Triggerguard: Magpul enhanced aluminum folding (not in production) Grip: Magpul MIAD Receiver extension - buffer tube: VLTOR mil-spec 5 positions Buttstock: VLTOR mil-spec size modstock clubfoot Weaponlight: Surefire M961 Optic: EOTech 551 Sling: Blue Force Gear IDF type 2 point sling |
|
|
IA, USA
|
Posted: 11/25/2021 12:46:23 AM EDT
[Last Edit: racer765]
[#30]
Quote HistoryOriginally Posted By Bishopn87: ... Also have an ATN XSight Pro 4K in a QD mount that moves around from rifle to rifle. ... How do you like the XSight? I keep piling up c notes for one and then spending them on other toys. A friend let me look through his ATN thermal, it was amazing. Is the near infrared in the XSight really useful at night? |
|
|
|
Posted: 12/2/2021 6:29:41 PM EDT
[#31]
|
|
|
|
AZ, USA
|
Posted: 12/7/2021 10:22:18 PM EDT
[#32]
Here is my latest build - .50 Beowulf with Custom Ceracote job
 20210917_125920 by Lyle Southard, on Flickr
|
|
|
|
Posted: 12/8/2021 7:25:52 AM EDT
[#33]
Quote HistoryOriginally Posted By BlackTaco: .300 Surefire finally came in. BCM SBR Lower, 9” BCM .300BLK https://www.ar15.com/media/mediaFiles/126656/1BD6DE20-0947-4659-8B9A-C8AC94A0CC71_jpe-2189594.JPG Clean 
|
|
|
|
GA, USA
|
Posted: 12/12/2021 10:30:31 AM EDT
[Last Edit: paindocGA]
[#34]
AR15 Build
Charging handle: Grab a Gun 11/26/21 Luth AR 601 Retro triangle $24 21.8g Barrel nut/Hand-guard: Jag Composites 11/26/21 13.5 Ultra Lightweight $230 111g with screws and mount Upper: OpticsPlanet 11/25/21 2a Balios lite $234 168.6g Lower: MSC Firearms 11/23/21 Tegra AR15-CFL Stripped Carbon Fiber Lower Receiver $39.14 105g Barrel: OpticsPlanet 11/25/21 Faxon pencil w/ Integral Flash Hider, 15A58M16NPQ-IMDF $200.57 564.9g including barrel nut Lower parts kit: NewFrontierArmory 11/23/21 NFA Polymer LPK $35.99 119.1g (includes pistol grip Stock: WingTactical 11/25/21 BAD Sabertube, JP Enterprises spring, Aero Precision buffer $179, $13, $18.75 45.8g spring 83.9g buffer 198.1g saber tube with stock Gas Block: WingTactical 11/25/21 Master of Arms Ti adj, Aero Precision Melanite tube mid length $155 $15 16.1g MOA gas block 19g tube BCG Brownells M16 Nitride $170 236.8 3.73 lbs = 1670 g $1314.45 https://www.dropbox.com/s/2w00cvqkvsd8q5d/IMG-2087.jpg?raw1 |
|
|
|
Posted: 12/12/2021 10:54:24 AM EDT
[Last Edit: Alaska511]
[#35]
Quote HistoryOriginally Posted By paindocGA: AR15 Build Not letting me upload photo? You're doing it wrong. 
|
|
|
|
|
Posted: 12/12/2021 12:14:57 PM EDT
[Last Edit: Blackie]
[#36]
 • Aero Precision M4E1 Stripped Lower • Aero Precision M4E1 Threaded Stripped Upper - no FA • Noveske Takedown/Pivot Pins • Aero Precision AR15/M4E1 Field Repair Kit • Aero Precision AR15 Ejection Port Cover • Aero Precision AR15 ATLAS S-ONE 15" M-LOK Handguard w/ Magpul Type 2 Covers • Impact Weapons Finger Stop • Wilson Combat BCG (NiB) • Wilson Combat, 5.56 NATO, RECON Barrel, 16", 1:8 Twist, Fluted, Stainless Steel, Glass Bead • Wilson Combat Low Profile Gas Block • Wilson Combat Gas Tube - Intermediate Length • Wilson Combat ACCU-TAC Flash Hider • Seekins Precision Bolt Catch • Seekins Precision Billet Magazine Release Button • Colt AR-15/M16 Magazine Release • Magpul MOE+ Grip • BCM GUNFIGHTER QD End Plate • BCM GUNFIGHTER Charging Handle - Mod 3B • BCM Milspec Carbine Stock Hardware Mounting Kit • ALG Defense ACT Trigger • Radian Talon Ambidextrous Selector • Magpul MOE SL Stock • Swampfox Tomahawk 1x8 & Hostile Engagement mount 8.1 pounds with an empty mag |
|
|
|
NV, USA
|
Posted: 12/17/2021 8:10:27 PM EDT
[#37]
 Current configuration with GG&G SFG short vertical forward grip, Viking light mount, Magpul SL grip, Magpul SL-K buttstock, Magpul MBUS2 BUIS and Vortex Sparc AR RDS.  First changes in 2010: Daniel Defense EZ CAR 7.0 drop-in rails (not in production) Knight's Armament vertical forward grip Magpul rail covers Magpul MOE triggerguard Magpul MOE grip Magpul MOE buttstock Magpul MBUS rear sight Stag Arms ambi selector BCM mil-spec buffer tube Surefire G2 light Daniel Defense offset light mount Specter Gear MOUT single point sling Beta C-mag 100rds  Original build configuration in 2006: RRA factory A4 upper half with bolt and charging handle RRA stripped LAR-15 A4 lower receiver RRA 9mm lower parts kit RRA 9mm buffer & buffer spring Hahn Precision bottom load mag adapter Duckbill grip Ace M4 SOCOM aluminum buttstock Daniel Defense receiver end plate sling mount Colt detachable carry handle Colt 32 rd magazine I assembled the lower half myself which was my 3rd build, the fit of the upper and lower receiver was super tight, I had to use synthetic pin punch to move the takedown pins. |
|
|
OH, USA
|
Posted: 12/29/2021 9:08:10 AM EDT
[#38]
Aero M4 E1 upper
BA lower Colt 14.5 SOCOM p/w Toolcraft cage code bcg 
|
|
|
OH, USA
|
Posted: 12/29/2021 9:21:21 AM EDT
[Last Edit: Order66]
[#39]
Aero M5 upper/lower
BA bcg 16" med profile Gamma MD Leupold 2-7x33 in a WARNE mount KAC backups 12" enhanced hg Harris bipod  |
|
|
OR, USA
|
Posted: 12/29/2021 11:12:03 PM EDT
[#40]
For my 50th bday I decided to go completely apeshit. Because if not now, when? Here is the result.
 4lb-9oz bare weight. 5lb-1oz as shown. I can trim another 3 oz pretty easily but will see how this combo works first. I have a Nomad-Ti in jail so not planning a muzzle device. V-Seven: 2055LR Li-Al receiver 2055 Li-Al buffer tube 9.2” Ultralight HG Ti safety, mag release, CN/EP, etc. BSF 10.5” .300AAC Walker Defense Research Ti BCG SLR Ti .875 adj. block Geissele SD-E Radian Raptor SD-SL Kynshot RB-5000L / Sprinco Yellow Brigand Arms CF pistol grip Future Forged handstop Thordsen Customs cheekrest |
|
|
PA, USA
|
Posted: 12/30/2021 8:12:59 PM EDT
[Last Edit: W4hl]
[#41]
Always wanted an FDE build
.jpg) Aero M4E1 FDE upper & Lower Eotech EXPS3 Strike Industries lower parts Magpul Stuff I can’t figure out how to get the picture, I’ve tried everything BUT the correct way. Carry on. |
|
|
TX, USA
|
Posted: 1/8/2022 6:50:16 PM EDT
[Last Edit: RhinelandArms]
[#42]
These are Ar15 Variant chassis, They dont look like a typical AR but its 100% AR inside. The first one we will build will use Odin works bolt and barrel in 6.5 Grendel, CMMG trigger.
|
|
|
TX, USA
|
Posted: 1/13/2022 6:12:51 PM EDT
[#43]
I have this on my build post but thought I'd post the pic here too.
I built this as my Hog Gun. I wanted it for day & night hunting. As a semi-auto & straight pull bolt action. Bolt action is quieter when suppressed. Anyway, it's not to everyone's taste but is purpose built for my needs. 
|
|
|
|
Posted: 1/13/2022 8:59:30 PM EDT
[Last Edit: eddster]
[#44]
 Centurion 14.5" midlength CHF lightweight barrel Geissele Mk14 Aero M4E1 receivers Larue MBT2S Holosun 515 on an LT751 Holosun 3x magnifier (for now) Troy BUIS (still experimenting with placement of the rear sight) VCAS sling, and SBA4 until I get the $200 extortion paperwork Bout 75% of the parts on it are courtesy of @micmac  
|
|
|
|
TX, USA
|
Posted: 1/16/2022 5:47:46 PM EDT
[Last Edit: Abbysdaddy04]
[#45]
Swampfox Arrowhead 1-8 Aero mount Aero Upper Ballistic Advantage 16” barrel Midwest Industries Combat Rail Strike Industries charging handle PSA lower (now has a 17 Design lower, which I hate) Tom’s Tactical 2 stage trigger Some unknown lower parts kit Unknown cheap bcg that will be replaced BCM all furniture Since pic taken, now sporting an Ambi safety of some make Vortex Diamondback Tactical 4-12x40 Aero mount Aero M4E1Upper Aero handguard Ballistic Advantage18” Barrel PSA nickel boron bcg Geissele charging handle Aero M4E1 Lower Tom’s Tactical lower parts Kit Geissele SSA-E trigger Magpul MOE pistol grip A2 stock of some origin Since pic taken, now sporting a Radian ambi safety SIG Romeo 5 B. King complete upper with 11.5” barrel and blast can Aero M4E1 lower Tom’s Tactical lower parts kit with enhanced trigger Tango Down pistol grip SBA4 pistol brace |
|
|
|
Posted: 1/23/2022 6:58:40 AM EDT
[#46]
 Attached FileGibbz side charging upper / Gibbz lower cerakoted sniper grey 224 Valkyrie 18" Proof Research CFW PRI handguard with SPR top rail SLR Sentry 7 adj gas block JP LMOS bolt carrier with FailZero 6.8 bolt TriggerTech Diamond trigger ERGO TDX-0 Smoke Composites adjustable stock JP silent capture spring Atlas bipod currently has a Iray Bravo thermal on it for predator hunting, but typically wears a S&B 3-20. Suppressor is a Griffin Optimus Micro |
|
|
|
NC, USA
|
Posted: 1/23/2022 12:14:56 PM EDT
[#47]
|
|
|
MT, USA
|
Posted: 1/24/2022 4:20:26 PM EDT
[Last Edit: Rezarf2]
[#48]
ncgoober's build above makes me feel like I cheated by slapping parts together. Cool build man.
  Started this build like 18 months ago. Finally found a pawn shop optic for it. Upper: Aero enhanced receiver Aero enhanced 15” handguard MLOK Ballistic Advantage 18” SS premium barrel Surefire Brake Comp Magpul sling QD BCM gunfighter Noveske marked Aim Surplus Nitride BCG Aero Gas system Lower: Aero Enhanced Lower receiver Aero LPK CMC 2.5# Flat trigger Seekins? (Can’t remember) Bolt release/mag catch Noveske 60* safety Magpul K2 grip Magpul UBR Gen 2 Tubbs flatwire spring (best cheap mod ever) Dual QD cup from the guy here on ARF OPTIC: ADM Scout Recon FDE Leupold 3-9x40 Rifleman scope |
|
|
KY, USA
|
Posted: 2/3/2022 5:56:28 PM EDT
[Last Edit: Jaa0109]
[#49]
My C7 clone/ tribute is finally complete.
Basically no parts are clone correct, but it looks right, and I added a bigger leaf to the right hand side for a bit of a personal touch / fair      Upper is a Fulton(??) C7 upper with a Delton Barrel and handguards cerakoted in Noveske Bazooka Green. (Delton's rifle HGs are surprisingly nice. This one is thinner and more comfortable than a USGI A2 I own) BCG is generic, C7 charging handle latch from Smokies Leather Triad Rail is an imported (Irish, of all things...) airsoft repo because the real thing was complete unobtanium at least at the time... Lower is a custom engraved job from MOA Customs. Buttstock and pistol grip are Colt, also cerakoted in NBG Colt Ambi safety Generic Ambi mag release Pretty generic LPK (either Delton or Anderson. Do not recommend. Tolerance stacking kinda bit me with this one...), but with a PSA polished FCG and JP Enterprises reduced power spring kit Canadian Maple Leaf stamped Thermold mag, because what else could it have? I haven't had a chance to take this out to the range yet, but prior to the custom lower this was my go-to rifle. |
|
|
|
Posted: 2/10/2022 1:57:40 AM EDT
[#50]
Quote HistoryOriginally Posted By eddster93: https://www.ar15.com/media/mediaFiles/497516/signal-2022-01-10-16-38-10-068__1___01-2239442.jpg Centurion 14.5" midlength CHF lightweight barrel Geissele Mk14 Aero M4E1 receivers Larue MBT2S Holosun 515 on an LT751 Holosun 3x magnifier (for now) Troy BUIS (still experimenting with placement of the rear sight) VCAS sling, and SBA4 until I get the $200 extortion paperwork Bout 75% of the parts on it are courtesy of @micmac Nice build. @micmac is a stand up guy. He has helped me out alot. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
