User Panel
User Panel
User Panel
|
Posted: 3/6/2017 11:46:28 PM EDT
[#1]
|
|
|
|
TX, USA
|
Posted: 3/7/2017 10:58:20 PM EDT
[Last Edit: SBRPDW6]
[#2]
When "The Management" tells you to gear up and go to work
|
|
|
FL, USA
|
Posted: 3/8/2017 8:52:18 PM EDT
[Last Edit: 3D-Seth]
[#3]
My latest. 50 rounds down the pipe so far. This is going to be a shooter for sure. Stupid accurate in the first few rounds, and the shooter sucks to boot!
Rock River Matched Upper and Lower Receivers White Oak Armament 18" SPR Fluted Barrel, Mid Length SLR Rifle Works Titanium Sentry 7 Adjustable Gas Block Battle Comp 1.0 Midwest Industries G3 K-Series 12.6" Sharps Rifle Company NP3+ Bolt Carrier Group Geissele DMR JP Silent Captured Spring (H2 - plan on shooting suppressed) Magpul MOE SL Stock Magpul MOE Grip Vortex Viper PST (G1) 4-16x50 Magpul MBus Pro LR BUIS Cerakote by GCP Rifle Works In Venice, FL 
|
|
|
TX, USA
|
Posted: 3/8/2017 9:06:46 PM EDT
[#4]
Quote HistoryOriginally Posted By 3D-Seth:
My latest. 50 rounds down the pipe so far. This is going to be a shooter for sure. Stupid accurate in the first few rounds, and the shooter sucks to boot! Are the receivers hydro-dipped? That's a sexy boom-stick, Brother. |
|
|
|
Posted: 3/8/2017 9:12:09 PM EDT
[#5]
Nice rifle ^
|
|
|
|
FL, USA
|
Posted: 3/8/2017 9:12:14 PM EDT
[#6]
Quote HistoryOriginally Posted By SBRPDW6:
Are the receivers hydro-dipped? That's a sexy boom-stick, Brother. Thanks man! Its cerakoted by a local shop here. They did a phenomenal job with it! Seth |
|
|
|
Posted: 3/17/2017 12:40:05 AM EDT
[#7]
|
|
|
|
TX, USA
|
Posted: 3/17/2017 12:59:39 AM EDT
[Last Edit: RoadWarrior]
[#8]
Quote HistoryOriginally Posted By SBRPDW6:
When "The Management" tells you to gear up and go to work
http://i22.photobucket.com/albums/b341/pmguru2005/FullSizeRender_4.jpg http://i22.photobucket.com/albums/b341/pmguru2005/FullSizeRender.jpg http://i22.photobucket.com/albums/b341/pmguru2005/FullSizeRender_1.jpg http://i22.photobucket.com/albums/b341/pmguru2005/FullSizeRender_3.jpg http://i22.photobucket.com/albums/b341/pmguru2005/FullSizeRender_2.jpg http://i22.photobucket.com/albums/b341/pmguru2005/FullSizeRender_5.jpg |
|
|
|
Posted: 3/17/2017 9:56:58 AM EDT
[#9]
Quote HistoryOriginally Posted By 3D-Seth:
My latest. 50 rounds down the pipe so far. This is going to be a shooter for sure. Stupid accurate in the first few rounds, and the shooter sucks to boot! Rock River Matched Upper and Lower Receivers White Oak Armament 18" SPR Fluted Barrel, Mid Length SLR Rifle Works Titanium Sentry 7 Adjustable Gas Block Battle Comp 1.0 Midwest Industries G3 K-Series 12.6" Sharps Rifle Company NP3+ Bolt Carrier Group Geissele DMR JP Silent Captured Spring (H2 - plan on shooting suppressed) Magpul MOE SL Stock Magpul MOE Grip Vortex Viper PST (G1) 4-16x50 Magpul MBus Pro LR BUIS Cerakote by GCP Rifle Works In Venice, FL https://c1.staticflickr.com/1/623/32489241454_892a79f538_b.jpg https://c1.staticflickr.com/3/2922/33291108466_c584252bd9_b.jpg https://c1.staticflickr.com/4/3904/33204106671_4a9270d290_b.jpg https://c1.staticflickr.com/4/3945/33331948415_2ea11f84e9_b.jpg https://c1.staticflickr.com/1/716/32517628943_ac8ca4a127_b.jpg https://c1.staticflickr.com/1/667/32489256704_f0167279ee_b.jpg https://c1.staticflickr.com/1/731/33176680512_f310cc6fc4_b.jpg |
|
|
|
|
Posted: 3/17/2017 10:07:25 AM EDT
[#10]
Quote HistoryOriginally Posted By M4ger:
https://c1.staticflickr.com/3/2810/33460919515_a9c58df662_b.jpg |
|
|
|
TX, USA
|
Posted: 3/17/2017 11:26:55 AM EDT
[Last Edit: SBRPDW6]
[#11]
Quote HistoryOriginally Posted By RoadWarrior:
OK, this is yummy...spill your guts on the specs please. - Phase 5 Receiver and Barrel (7.5" bbl) - Phase 5 SNLP Rail System (7.5") - Phase 5 LittleBoy Hex Brake (Yes...very loud) - POF FTA Front Sight - Troy Rear BUIS Battle Sight - Magpul AFG - VDI LM BCG - NLA Scythe Ambi CH - SI Ultimate Dust Cover - SI Enhanced Forward Assist Lower: - Seekins SP223 (w/ Ambi Bolt Catch) - JP FCG (3 lbs) - Armaspec XPDW w/ H2 Stealth Recoil Spring - BAD Ambi Selector - SI Extended Take-down Pins - Ghost Firearms Skeletonized Pistol Grip - KNS GEN 2 MOD 2 Anti-rotation Pins - Odin Extended Mag Release Button - Norgon Ambi Mag Release Optic: ISM-IR Light: - MFT TBLWR I was flamed by someone in this forum who said I was bragging about dropping over $2K on a "useless" PDW. Never did I mention how much I spent on the parts. Didn't realize I had to run it by "him" to get approval on what to spend "my" money on. Majority of the parts were free (I do T&Es for certain manufacturers and one of the perks is that I get to keep the stuff at no cost). I thought they cleaned this place up, but I guess they still have a few "ego-maniacs" out there. Anyways, thanks for your comments RoadWarrior. |
|
|
TX, USA
|
Posted: 3/17/2017 11:36:49 AM EDT
[#12]
Quote HistoryOriginally Posted By M4ger:
https://c1.staticflickr.com/3/2810/33460919515_a9c58df662_b.jpg |
|
|
|
Posted: 3/17/2017 11:37:21 AM EDT
[#13]
Quote HistoryOriginally Posted By SBRPDW6:
I was flamed by someone in this forum who said I was bragging about dropping over $2K on a "useless" PDW. Never did I mention how much I spent on the parts. Didn't realize I had to run it by "him" to get approval on what to spend "my" money on. Majority of the parts were free (I do T&Es for certain manufacturers and one of the perks is that I get to keep the stuff at no cost). I thought they cleaned this place up, but I guess they still have a few "ego-maniacs" out there. Anyways, thanks for your comments RoadWarrior. |
|
|
|
TX, USA
|
Posted: 3/17/2017 12:14:34 PM EDT
[#14]
Quote HistoryOriginally Posted By BigMan74:
I've dropped over $1500 on an AR just because it was with the parts I wanted and it made me happy, I am in no way a tier anything operator, I plink and hunt. Would I be ok with a $500 PSA budget rifle, most likely yes but I like to support site sponsors. OP do what makes you happy, if you have the stuff laying around then more power to you to build it how you want |
|
|
|
Posted: 3/17/2017 12:30:52 PM EDT
[#15]
Quote HistoryOriginally Posted By SBRPDW6:
I was flamed by someone in this forum who said I was bragging about dropping over $2K on a "useless" PDW. Never did I mention how much I spent on the parts. Didn't realize I had to run it by "him" to get approval on what to spend "my" money on. Majority of the parts were free (I do T&Es for certain manufacturers and one of the perks is that I get to keep the stuff at no cost). I thought they cleaned this place up, but I guess they still have a few "ego-maniacs" out there. Anyways, thanks for your comments RoadWarrior. |
|
|
|
|
Posted: 3/19/2017 6:17:52 PM EDT
[#16]
|
|
|
|
ME, USA
|
Posted: 3/21/2017 8:32:55 AM EDT
[Last Edit: ward93264]
[#17]
My Black and Blue AR Build. A tribute to Law Enforcement. Thanks to all who have served!
|
|
|
|
Posted: 3/21/2017 4:25:15 PM EDT
[#18]
Quote HistoryOriginally Posted By ward93264:
My Black and Blue AR Build. A tribute to Law Enforcement. Thanks to all who have served! http://i1250.photobucket.com/albums/hh523/ward93264/BlackBlueAR_zpsbaiffznu.jpg 
|
|
|
|
|
Posted: 3/21/2017 4:27:54 PM EDT
[#19]
I havent shown this in a while. Took some pics over the weekend.
|
|
|
|
|
Posted: 3/24/2017 6:35:19 PM EDT
[#20]
|
|
|
|
|
Posted: 3/26/2017 12:00:27 PM EDT
[Last Edit: Soconmtneer]
[#21]
 Attached FileAero Precision upper and lower. Colt BCG Colt M4 barrel Pinned and weld Dead Air Keymount Brake Noveske NSR Rail LaRue MBT trigger BCM Buffer tube assembly Strike Industries Viper stock and charging handle. |
|
|
|
WI, USA
|
Posted: 3/26/2017 12:25:04 PM EDT
[#22]
Quote HistoryOriginally Posted By hfrog355:
Well, I've been coveting the 20" Wilson Combat 223 Wylde barrels for a while and when I saw them go on sale during the holidays, I couldn't resist snagging one. I was already going the lightweight route with my new build, so I decided to turn my original AR into a tack driving tank (the barrel alone is 63oz, lol). It's still a work in process - I'd like to get a higher powered scope (currently a 2-7) and a different stock - but I'm happy with where it's headed. These are my first shots after zeroing the rifle. Certainly not world beating, but not bad for me with a 7x optic. http://i.imgur.com/lTyDwCum.jpg Here's the gun as it sits now: http://i.imgur.com/y39yiVMl.jpg |
|
|
|
Posted: 3/26/2017 1:33:34 PM EDT
[#23]
Quote HistoryOriginally Posted By SBRPDW6: Damn...that's a nice set, Brother. Quote HistoryOriginally Posted By SBRPDW6: Damn...that's a nice set, Brother. Originally Posted By hfrog355: Hot. Originally Posted By mybronco2:
Looks like YHM owns this page. https://www.AR15.Com/media/mediaFiles/256472/IMAG1670-1-169760.JPG 
Knight's Legacy E3 barrel and BCG, gas block, tube, and URX2 10.75 installed to some Noveske Gen1 receivers. I pulled all the taupe furniture off and installed black yesterday. 
|
|
|
|
|
Posted: 3/26/2017 2:31:05 PM EDT
[#24]
Quote HistoryOriginally Posted By uplandgunner:
What fore end is that? |
|
|
|
TX, USA
|
Posted: 3/27/2017 12:02:32 AM EDT
[#25]
Stag Arms upper & lower
BCM buttstock & grip BCM BCG & Gunfighter A44 charging handle Larue Stealth 16" barrel with mid length gas system Midwest Industries G3 m lok handguard Magpul AFG & MBUS sights 
|
|
|
|
Posted: 3/27/2017 8:57:29 PM EDT
[#26]
12" LT Stealth barrel, BCM upper, KMR-A rail, LT BCG, MBT2, TA33R-8, and a can |
|
|
|
TX, USA
|
Posted: 3/27/2017 10:44:22 PM EDT
[#27]
Quote HistoryOriginally Posted By M4ger:
https://c2.staticflickr.com/4/3778/33278454665_25d885335f_k.jpg |
|
|
MO, USA
|
Posted: 4/2/2017 11:13:17 PM EDT
[#28]
Colt 14.5 socom. Even did the pin and weld myself.
|
|
|
|
Posted: 4/3/2017 9:57:59 AM EDT
[#29]
|
|
|
|
TX, USA
|
Posted: 4/4/2017 11:14:23 PM EDT
[Last Edit: Raahide]
[#30]
UPPER Spikes Complete Upper Reciever PRI Gas Buster Sionics Np3 Bolt LMT Enhanced Carrier Group w/ Voodoo Fireing Pin Midwest Industries Gen3 T-Series Handguard TangoDown "Stubby" 14.5" Ballistics Advantage Hansen Profile Barrel w/ Pinned Gas Block Surefire 3 Prong Flashider KAC Micro Rear 200-600m Sight Magpul Pro Front Sight w/ .034 post CQB Front Sling Mount Holosun Micro (503G) w/ ACSS SLR Absolute Witness Mount Aimpoint 3x-C Larue Flip To Side Mount LOWER Spikes Stripped Lower Strike Industried LPK Gisselle G2G Trigger Spikes Aluminium Trigger Gaurd Magpul Miad 1.1 Pistol Grip w/ 4oz bottle Spikes 6 Position Buffer Tube Springco "Blue" Spring H3 Buffer Bravo Company Gunfighter Mod 0 Stock CQD End Plate Edited: 7 apr 17 to add parts list. |
|
|
|
Posted: 4/5/2017 1:29:06 AM EDT
[#31]
Quote HistoryOriginally Posted By matticuski: This is nice 
The SI-Defense lower in the picture at the top of the page is going to be used on a different rifle I'm working on at present. Should be finished soon
|
|
|
|
|
Posted: 4/5/2017 4:50:03 PM EDT
[#32]
Quote HistoryOriginally Posted By SBRPDW6:
Upper: - Phase 5 Receiver and Barrel (7.5" bbl) - Phase 5 SNLP Rail System (7.5") - Phase 5 LittleBoy Hex Brake (Yes...very loud) - POF FTA Front Sight - Troy Rear BUIS Battle Sight - Magpul AFG - VDI LM BCG - NLA Scythe Ambi CH - SI Ultimate Dust Cover - SI Enhanced Forward Assist Lower: - Seekins SP223 (w/ Ambi Bolt Catch) - JP FCG (3 lbs) - Armaspec XPDW w/ H2 Stealth Recoil Spring - BAD Ambi Selector - SI Extended Take-down Pins - Ghost Firearms Skeletonized Pistol Grip - KNS GEN 2 MOD 2 Anti-rotation Pins - Odin Extended Mag Release Button - Norgon Ambi Mag Release Optic: ISM-IR Light: - MFT TBLWR I was flamed by someone in this forum who said I was bragging about dropping over $2K on a "useless" PDW. Never did I mention how much I spent on the parts. Didn't realize I had to run it by "him" to get approval on what to spend "my" money on. Majority of the parts were free (I do T&Es for certain manufacturers and one of the perks is that I get to keep the stuff at no cost). I thought they cleaned this place up, but I guess they still have a few "ego-maniacs" out there. Anyways, thanks for your comments RoadWarrior. 
|
|
|
|
|
Posted: 4/5/2017 11:46:40 PM EDT
[#33]
|
|
|
|
|
Posted: 4/5/2017 11:50:47 PM EDT
[#34]
16" Larue PredatAR barrel (won during super long giveaway), Aero upper and M-LOK hand guard in FDE, PA red dot on a LT mount. |
|
|
|
|
Posted: 4/6/2017 12:05:10 AM EDT
[#35]
Quote HistoryOriginally Posted By Freakinout:
http://poteau-oil.com/photography/firearm2017/fde0317-01.jpg 16" Larue PredatAR barrel (won during super long giveaway), Aero upper and M-LOK hand guard in FDE, PA red dot on a LT mount. |
|
|
|
|
Posted: 4/6/2017 9:07:18 PM EDT
[#36]
Parts arrived today which allowed me to complete this rifle.
The Guntec billet upper worked really well with the SI-Defense lower receiver in color and what I'd call visual compatibility. The way SI-Defense milled this lower, a standard forged upper just looked out of place to my eyes, so I began looking for some cleaner looking billets. I had considered using the Bootleg upper, but the way they milled it, the visual appearance looked 'backwards to me' so I kept the search up until I found the Guntec with F/A and port door from Primary Arms for $95. I had also done a littler research regarding the H&K 416/MR556 charging handle, and figured out a milspec charging handle would accept the 416/MR556 latch. I installed it on a CH today and am glad I picked it up for this project. I would compare it to a Raptor's latch in terms of size and texture. During the installation of the Fortis handguard, I discovered the way Guntec milled their receiver, the anti-rotation tabs on the REV2 would not allow it to be installed, so I removed them. It makes sense to me why Guntec chose to design their handguards like the Noveske NSR, with a flush mounted rail that goes over a barrel nut allowing 6 points of fastening. I'd like to see Guntec further eliminate some of the excess of their receiver, but all in all I think it was worth the $95 I paid for it. Also, the Magpul SL-K closes fully on a LMT buffer tube with the KAC non-rotational sling swivel mount PN 22051-1. 
|
|
|
|
|
Posted: 4/10/2017 1:21:46 PM EDT
[Last Edit: GySgt_D]
[#37]
 Attached FileSkyjacker Defense blem lower Unknown upper Brand X 18" .223 Wylde barrel Geissele G2S trigger Geissele forend Elcan OS4x scope with Vortex Venom RDS Magpul MOE stock and grip Vickers sling Aim Surplus NiB BCG Magpul MBUS Pro sights Gemtech/Smith Ent. Quickmount |
|
|
|
LA, USA
|
Posted: 4/11/2017 9:03:06 PM EDT
[#38]
|
|
|
|
Posted: 4/11/2017 11:34:38 PM EDT
[#39]
|
|
|
|
|
Posted: 4/12/2017 12:52:39 AM EDT
[Last Edit: TerryH]
[#40]
First build. Home defense style theme. Not done but far enough to shoot. First 50 down range tonight.
Del-Ton custom upper assy. 16" 1x9 M4 profile Del-Ton Forged upper Double T Tactical stripped lower Del-Ton LPK Custom paint on mag realease, safety, bolt catch, color fill. House of Kolor Passion Purple, base/clear All Magpul MOE furniture with M-Lok low pro hand stop MBUS rear sight Ozark Armament Rhino red dot Ambi single point sling 
|
|
|
|
|
Posted: 4/13/2017 4:21:24 PM EDT
[#41]
Trying out this Guntec billet upper on a handful of lowers has got me thinking it would be a good option for several MFGs.
I have pictured it with: SI Defense Gen4 Quentin Defense S&W Magpul edition I also tried it with my ADM UIC, but their installed bolt catch on the left side would not clear the cutout made in the Guntec billet upper. It was a very minimal amount of obstruction and I think if you were set on it, you could make it work by relieving the back side of the catch and refinishing. I also figured out the S&W Magpul edition lower lines up fairly well with a CMT upper 
|
|
|
|
TX, USA
|
Posted: 4/15/2017 10:43:02 PM EDT
[Last Edit: saint_attila]
[#42]
JR22, does the Odin Works Adjustable Gas Block make contact with the Geissele SMR MK8? My research indicates that the rail ID and gas block outer edge OD are both 1.35".
Odin Works Adjustable Gas Block Profile Dimensions Can you add a link/picture looking from the muzzle? Thanks. |
|
|
GA, USA
|
Posted: 4/16/2017 12:17:19 AM EDT
[#43]
No. They do not touch at all.
I have that same gas block / rail combo on two builds. Zero problems. I'll get some pics for you. |
|
|
TX, USA
|
Posted: 4/17/2017 8:35:50 PM EDT
[Last Edit: saint_attila]
[#44]
Quote HistoryOriginally Posted By JR22:
No. They do not touch at all. I have that same gas block / rail combo on two builds. Zero problems. I'll get some pics for you.
|
|
|
FL, USA
|
Posted: 4/17/2017 11:02:13 PM EDT
[#45]
 [/img]
finished this up today for hunting season this year! |
|
|
TX, USA
|
Posted: 4/25/2017 6:08:54 PM EDT
[#46]
First upper I've build...
|
|
|
USA
|
Posted: 4/26/2017 9:36:38 PM EDT
[Last Edit: Heretical45]
[#47]
Upper:
PSA Freedom with 1:7 nitride that they had on sale that I wanted to do a budget build on. 15" UTG Pro Handguard Chopped a2 FSB Standard PSA BCG and CH - Gonna run a durability and accuracy test with most of this stuff and swap out for fun. Lower: PSA Premium Lower - bought it close to 7 years ago Magpul MOE stock and grip CMMG LPK KWS trigger springs Stag mil-spec trigger 
My first full build back in November Upper: Aero Upper Rainier Arms 18" 223 wylde match barrel Toolcraft Nitride BCG and BCM Mod 3 CH Troy LP gas block BCM KMR-A 15" Lower: Aero Lower ALG ACT Trigger w/ JP reduced power springs Magpul Moe+ Grip Luth-AR Stock (rifle length) 
|
|
|
AL, USA
|
Posted: 4/27/2017 10:40:11 AM EDT
[#48]
I just got two tax stamps (control 20163225xx range if anyone is interested in where the AFT is at these days) back from the ATF last week and finished putting these together last night. The top one is a 5.56. It has a Seekins upper and lower, 12" Seekins MCSR hand guard, SD tactical brake (for the coming one of these days 8" SD Tactical Form 1 titanium suppressor) Seekins adjustable gas block, 14.5" FN made M249 spec carbine barrel, Rubber City full mass M16 bolt carrier and bolt, BCM charging handle, pistol grip, buffer tube and stock, Giessele SD-C trigger and twisted wire buffer spring with their H buffer, Mepro M-21 optic and Magpul Pro offset BUIS.
The stand alone upper goes on lower number 1. Aero upper, same MCSR hand guard, Noveske 8.5" 300 Blackout barrel with the SD Tactical brake (for the other coming one of these days 8" SD tactical Form 1 titanium suppressor), EOTech 512 optic and MI BUIS. The bottom one is an 11.5" budget (except for the Geissele SSA trigger and Aimpoint H-1 optic) build I did for Mama so she could have something light. Sabre lower. Off the shelf PSA 11.5" freedom upper. She's a lefty so there is an ambi charging handle and safety. It's just a tad over 6 lbs with the optic and BUIS. One of these days I may swap out the barrel for something with a light weight profile, and see if I can bring that down a little more. 
|
|
|
|
Posted: 4/30/2017 1:10:55 AM EDT
[#49]
Gave the AR15 some much needed upgrades tonight! Added a Larue tactical A-PEG grip, and a Magpul CTR with Larue tactical RISR.
Also the Magpul MS4 Sling and foregrip! And to finish her off a CMC triggers drop in flat 3.5# trigger! Cant wait to put some rounds through it now!  Attached File |
|
|
|
|
Posted: 5/3/2017 9:04:31 AM EDT
[#50]
black and blue ar |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
