Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 3/27/2006 2:56:04 PM EDT
[Last Edit: 3/27/2006 6:37:25 PM EDT by new_master]
Hi all. I'm building up a AR now, and I have a DPMS stock. The stock has quite a bit of play in it, and I wanted to see what peoples opinions are on the
Vletor and Magpull stocks. Same time of play ? Any you would reccomend ?

I figure I would ask the helpful crew here before I drop $200

Thanks
Link Posted: 3/28/2006 11:13:26 PM EDT
save your money. remove the stock from the tube and wrap in an old T-shirt. place the stock in a vise and tighten gently until snug. use a blow dryer or heat gun on the stock until warm. then, tighten vise slowly a 1/4 to 1/2 turn. let stock sit overnight and then install. the stock will take the new shape and be snug. enjoy.
Link Posted: 3/29/2006 2:03:25 AM EDT
i recently put a magpul on my rifle,and it is very tight and dos'ent rattle at all.i especially like the fact that i can lock it into posistion just my 0.2-fed
Link Posted: 3/29/2006 2:12:19 AM EDT
+1 on the blowdryer trick. I've done five that way and it really works.
Link Posted: 3/29/2006 5:12:04 AM EDT
If you want the best get the LMT SOPMOD stock. No play and ithas the best cheekweld out of any of the AR stocks bar none. There is no better collapseable stock out there.

Now if you want a adjustable precision stock the Magpul PRS is the best out there. But this stock does not collapse. This stock is great when you are using large scopes that need higher rings to mount properly.

Link Posted: 3/29/2006 6:12:07 AM EDT
+1 on the heat gun trick except on mine, i just pushed the soft plastic in with a rounded dowl rod in one spot on the top of the stock where there already is a hole on mine and kept pressure on dowl rod until plastic cooled ( about 1 minute ) the reinstalled. Made a nice tight fit.
Top Top