Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 12/30/2005 9:34:50 AM EDT
I AM BUILDING A KAC MARK 11 MOD 0 CLONE USING MY DPMS LR308 AS A BASE RIFLE. I WANT TO FIND A GAS BLOCK THAT CAN BE TURNED DOWN SO A SUPPRESSOR CAN INDEX OVER IT AND SCREW ON TO THE END OF THE BARREL. SIMILAR TO THE KNIGHTS ARMAMENT VERSION BUT IT WILL INDEX ONLY NOT QUICK DETACH MOUNT TO IT. DOES ANYONE KNOW WHERE I CAN HAVE A GAS BLOCK LIKE THIS MADE?
THANKS
Link Posted: 12/30/2005 9:47:06 AM EDT
I had inquired with the folks at G.A. Precision about having one made for my SR25 since they have a Mk11 Mod0 at the shop.
After speaking with George Gardner (owner) at length about it, it was determined that the amount of machining operations involved to make one would take too much time and not be cheap unless you were making a good quantity of them.
Luckily, I managed to find myself a Mk11 Mod0 gas block.
Link Posted: 12/31/2005 11:10:04 PM EDT
[Last Edit: 12/31/2005 11:19:46 PM EDT by Randall_Rausch]
Link Posted: 12/31/2005 11:34:22 PM EDT
[Last Edit: 12/31/2005 11:34:48 PM EDT by exocet]

Originally Posted By Randall_Rausch:

There is also a 0.875" version.
If your barrel is a 0.940" diameter bull profile, I could re-profile the front end to fit the 0.875" gas block.



I might be interested in that.
Link Posted: 1/1/2006 1:13:49 AM EDT
Link Posted: 1/3/2006 6:58:45 PM EDT
THAT WOULD WORK HOWEVER I NEED IT TO HAVE A PICATINNY RAIL FOR THE FLIP UP FRONT SIGHT. DO YOU HAVE ANYTHING LIKE THAT?
THANKS
SSLIGH
Link Posted: 1/3/2006 7:27:34 PM EDT
[Last Edit: 1/3/2006 7:28:54 PM EDT by Randall_Rausch]
Link Posted: 1/3/2006 9:34:52 PM EDT
that is very nice Randall.
Link Posted: 1/3/2006 9:52:07 PM EDT

Originally Posted By exocet:
that is very nice Randall.

+1. Very nice work indeed.
Link Posted: 1/3/2006 10:09:37 PM EDT
[Last Edit: 1/3/2006 10:11:57 PM EDT by Randall_Rausch]
Link Posted: 1/3/2006 10:12:19 PM EDT
Randall do you have a photo with the suppressor installed or was that made for something else? That looks nice even though it may be old!
Link Posted: 2/10/2006 4:13:40 AM EDT
JUST IN CASE ANYONE IS INTERESTED THERE IS A SOURCE IN FLORIDA FRO THE MARK 11 MOD 0 GAS BLOCK. IT IS PRICEY BUT AT LEAST IT IS AVAILABLE. HERE IS THE LINK BELOW.


http://www.titusvillearmory.com/ItemDetails.asp?PART_ID=1084&MFG_ID=14
Top Top