Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 5/6/2003 12:46:41 PM EDT
i tried to dissamble this thing to clean and relube and i had to pry out the cam pin. it is as tight as you know what. will this thing wear and losen up? i never noticed this with my bm cam pin although i could be wrong. and when i fire the gun with my new upper will it cause damage to the upper?
Link Posted: 5/6/2003 1:13:05 PM EDT
Since you have another AR, I guess there's no need to ask if the firing pin is removed and the cam pin twisted 90 degrees. Will the cam pin move freely when you pull the bolt in and out by the locking lugs?
Link Posted: 5/6/2003 3:03:12 PM EDT
after i remove the firing pin, i have to turn the cam pin with forceps. when i put the rifle together and pull the charging handle everything seems to work fine. maybe i just need to fire two or three hundred rounds through the weapon to break it all in.
Link Posted: 5/6/2003 10:41:52 PM EDT
With new parts and especially with a new cam pin, it will be hard to rotate the cam pin even though, quite obviously, the firing pin has been removed. Until there is a little wear, I have had to turn the cam pin with a pair of needle nose pliers and then pry it loose with a small blade screwdriver. Remember: "You stroke me long time GI, and I get vely loosey." In time you will not have this tight of a fit. Charles Tatum Alamo Professional Arms
Link Posted: 5/7/2003 4:02:18 AM EDT
i kinda figured that. thanks alot y'all.
Top Top