Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 4/22/2003 10:59:29 AM EDT
That thing's loud as hell, I have had it. Can I do it at home and where do I start? It looks like it's very secured fixed in place.
Link Posted: 4/22/2003 12:04:13 PM EDT
[Last Edit: 4/22/2003 12:04:32 PM EDT by Mugzilla]
I think someone sells a cover that connects OVER the mini-y. It causes all gas to be ported forward... I'll look around for a link.
Link Posted: 4/22/2003 12:48:04 PM EDT
If it is on a 16 or 20 inch barrel, you can use a hammer and punch to knock out the tapered pin underneath that holds it on. Then shoot the rifle a few times until it flies off. If it's mounted to a 14.5 inch barrel, it is welded on by bushmaster and will have to be removed by a machinist.
Link Posted: 4/22/2003 1:48:37 PM EDT
[Last Edit: 4/22/2003 1:51:06 PM EDT by Beyond_Visual_Range]
Is the barrel on M4 type 14.5" right, this is it. I was going to get it off and put on a CAR15 type of muzzlebrake for it to be legal 16". How's it welded on? Blind pinned from bottom and then welded shut, like ATF wanted? If I can break the weld I might be able to get it off. Anyone ever attempted such things at home?
Link Posted: 4/22/2003 2:47:54 PM EDT
Here ya go... [url]http://www.assaultweb.net/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=004329[/url]
Link Posted: 4/23/2003 11:34:36 PM EDT
i replaced mine just the other day. its pined and welded on the top and bottom,mine also had locktite on the threds. i used a dremel tool to grind the pins just deep enuf to see the threds. then i used the dremel to cut slots on the top and bottom and used a big screwdriver to split the break and it came rite off. my new kkf g1a3 tac brake looks a lot beter
Link Posted: 4/24/2003 10:47:51 PM EDT
get rid of the whole bushy but that's just me
Link Posted: 4/25/2003 12:03:06 AM EDT
Why get rid of a Bushmaster, J-Bar? The VAST majority seem to be more than just happy with theirs.
Link Posted: 4/25/2003 10:57:23 PM EDT
Some bushys just seem to have problems That don’t happen in other rifles, but like I sed That is just I, I not saying that bushy parts are bad I’m just saying that, there are a few things that bushy douse That I personally don’t like, but bushy parts are ok
Link Posted: 5/5/2003 7:28:24 PM EDT
well damn my bushmaster was hardcore never had a misfire and in fact it was abou the best lookin one id ever seen or fired
Link Posted: 5/6/2003 12:18:11 AM EDT
Uh-oh.... [:K] I LOVE my Bushy, and I'm NEVER going to get rid of it. I'm just wondering... what IS a good weapon to get, since you'd get rid of the Bushy, J-Bar?
Link Posted: 5/7/2003 9:09:28 AM EDT
Originally Posted By Beyond_Visual_Range: That thing's loud as hell, I have had it. Can I do it at home and where do I start? It looks like it's very secured fixed in place.
View Quote
Or, just drill it out. Get a drill bit a size larger than the opening and ream it out. Takes the blast away.
Link Posted: 5/7/2003 7:24:12 PM EDT
That thing's loud as hell, I have had it. ____________________________________________ How loud is loud? Does it hurt your ears even with plugs in? I ask because I am thinking of buying the same thing. Does the Y-comp have other disadvantages?
Link Posted: 5/7/2003 8:32:39 PM EDT
[Last Edit: 5/7/2003 8:34:40 PM EDT by markmcjunkins]
I don't want to hi-jack this topic but, I'm interested in getting rid of my AK-74 brake. Does anyone know if I can follow the same operation as the Mini removal? Are all of the Bushy barrels threaded? Can I screw on one of Kurt's A3 tac brakes then pin and weld?
Top Top