User Panel
|
Anyone else having the windage and especially elevation act weird? I'll adjust the elevation to come up a bit, but the laser does a spiral all over the place up, down, left, right, and eventually settles. I can get it zeroed, but fine tuning the zero is a pain because up doesn't necessarily make it go up.
|
|
Quoted: Anyone else having the windage and especially elevation act weird? I'll adjust the elevation to come up a bit, but the laser does a spiral all over the place up, down, left, right, and eventually settles. I can get it zeroed, but fine tuning the zero is a pain because up doesn't necessarily make it go up. View Quote If it continues and your not happy and would like to get it looked at or replaced, let me know. We'll send ya an RMA and label at no cost to you of course. PM here if needed, here to always assist. |
|
Quoted: Anyone else having the windage and especially elevation act weird? I'll adjust the elevation to come up a bit, but the laser does a spiral all over the place up, down, left, right, and eventually settles. I can get it zeroed, but fine tuning the zero is a pain because up doesn't necessarily make it go up. View Quote I somehow lost all adjustment in windage. It worked, until it didn't. Bottoming the adjusting screw in both directions resulted in zero movement left or right. RMA in progress. |
|
If anyone wants to waste 6 minutes of their life, you can watch my video on the TOR mini IR here:
TNVC Steiner TOR MINI IR laser - short review and shooting |
|
Quoted: If anyone wants to waste 6 minutes of their life, you can watch my video on the TOR mini IR here: https://www.youtube.com/watch?v=VElMz5jSnhU View Quote Thanks for sharing! Sure looks like fun. Mine is sitting in the safe waiting for a surefire tape switch to free up the space on my rail. Can't wait to take it out. |
|
Quoted: If anyone wants to waste 6 minutes of their life, you can watch my video on the TOR mini IR here: https://www.youtube.com/watch?v=VElMz5jSnhU View Quote LOVE the light show first and foremost! Looks like artillery on the horizon. So glad you got to capture how sensitive a modern Gen 3 device can be, even at distance only using .2mW of power! My point early on designing this system was to make a very simple and affordable IR pointer with variable power to cut out the darn blooming with a .7mW laser by not having to mitigate it by adding additional IR Lum. I gotta ask, what suppressor were you using? Torward the end of the vid we virtually only heard the trigger, bolt and clang of the target! Or was that just the microphone not picking up the full shot report? Good stuff and thank you for sharing. |
|
Quoted: LOVE the light show first and foremost! Looks like artillery on the horizon. So glad you got to capture how sensitive a modern Gen 3 device can be, even at distance only using .2mW of power! My point early on designing this system was to make a very simple and affordable IR pointer with variable power to cut out the darn blooming with a .7mW laser by not having to mitigate it by adding additional IR Lum. I gotta ask, what suppressor were you using? Torward the end of the vid we virtually only heard the trigger, bolt and clang of the target! Or was that just the microphone not picking up the full shot report? Good stuff and thank you for sharing. View Quote View All Quotes View All Quotes Quoted: Quoted: If anyone wants to waste 6 minutes of their life, you can watch my video on the TOR mini IR here: https://www.youtube.com/watch?v=VElMz5jSnhU LOVE the light show first and foremost! Looks like artillery on the horizon. So glad you got to capture how sensitive a modern Gen 3 device can be, even at distance only using .2mW of power! My point early on designing this system was to make a very simple and affordable IR pointer with variable power to cut out the darn blooming with a .7mW laser by not having to mitigate it by adding additional IR Lum. I gotta ask, what suppressor were you using? Torward the end of the vid we virtually only heard the trigger, bolt and clang of the target! Or was that just the microphone not picking up the full shot report? Good stuff and thank you for sharing. I'm using an older Warlock 2 and pretty sure I've never cleaned it. I just love shooting my 22 uppers! So quiet. The NVG on my tripod is a fairly old Pitbull with an OMNI 4-ish tube, IIRC. My helmet mounted NVGs are better, but no where near Tier 1 supertubes. |
|
Quoted: I'm using an older Warlock 2 and pretty sure I've never cleaned it. I just love shooting my 22 uppers! So quiet. The NVG on my tripod is a fairly old Pitbull with an OMNI 4-ish tube, IIRC. My helmet mounted NVGs are better, but no where near Tier 1 supertubes. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: If anyone wants to waste 6 minutes of their life, you can watch my video on the TOR mini IR here: https://www.youtube.com/watch?v=VElMz5jSnhU LOVE the light show first and foremost! Looks like artillery on the horizon. So glad you got to capture how sensitive a modern Gen 3 device can be, even at distance only using .2mW of power! My point early on designing this system was to make a very simple and affordable IR pointer with variable power to cut out the darn blooming with a .7mW laser by not having to mitigate it by adding additional IR Lum. I gotta ask, what suppressor were you using? Torward the end of the vid we virtually only heard the trigger, bolt and clang of the target! Or was that just the microphone not picking up the full shot report? Good stuff and thank you for sharing. I'm using an older Warlock 2 and pretty sure I've never cleaned it. I just love shooting my 22 uppers! So quiet. The NVG on my tripod is a fairly old Pitbull with an OMNI 4-ish tube, IIRC. My helmet mounted NVGs are better, but no where near Tier 1 supertubes. Omni 4's still go on record as some of the toughest tubes out there! |
|
|
Quoted: My unit worked fine the day I received it. I had it in the safe for a week and took it out tonight to play with it and it won't turn on. I just tried 4 different brand new batteries and nothing. Has anyone else experienced this? View Quote @Biglumber Did you ever get this resolved? |
|
Quoted: @Biglumber Did you ever get this resolved? View Quote View All Quotes View All Quotes Quoted: Quoted: My unit worked fine the day I received it. I had it in the safe for a week and took it out tonight to play with it and it won't turn on. I just tried 4 different brand new batteries and nothing. Has anyone else experienced this? @Biglumber Did you ever get this resolved? I can tell ya from our end, we took care of him if he contacted us. |
|
|
|
My slightly unorthodox, but seemingly effective set up for night time beaver eradication and trout stream patrol.
Very happy so far with the TOR-mini, just need to get the beavers to cooperate. Attached File Attached File |
|
@TNVC - Can you tell about the changes to the mounting interface? I just got one of these a couple of weeks ago, and I've yet to see the rail clamp mine has pictured anywhere else, and I've seen no mention of any changes.
|
|
Quoted: @TNVC - Can you tell about the changes to the mounting interface? I just got one of these a couple of weeks ago, and I've yet to see the rail clamp mine has pictured anywhere else, and I've seen no mention of any changes. View Quote For better parts availability in the supply chain, it was decided to incorporate the PL mounting hardware. We'll get updated pics for the web site soon. Thank you! |
|
Can anyone see if it fits a HK45C? Rail space is short and I dont want to go passive with a MRDS.
|
|
Quoted: Is one setup any better than the other from a strength/longevity perspective? I'm not familiar with PL mounting hardware, but this looks a lot cleaner and less chintzy than the original cap screws. https://i.imgur.com/NiZr2ia.jpg https://i.imgur.com/6VYlSp9.jpg https://i.imgur.com/0WDpGGo.jpg View Quote Nope, nothing about longevity or strength, but all about streaming from the same parts pool instead of 4 more extra sku's for parts from other suppliers. Glad you like the look and thank you for the purchase! |
|
|
@lew I did! @TNVC replaced my unit immediately and I haven't had a single issue since. Absolutely love them and their amazing customer service!!
Edited to tag Lew since I forgot to quote in my reply. |
|
|
Quoted: Great pistola and I have one. Once I get back from outta town I will check the fit unless someone here reports back first. Thanks View Quote View All Quotes View All Quotes Quoted: Quoted: Can anyone see if it fits a HK45C? Rail space is short and I dont want to go passive with a MRDS. Great pistola and I have one. Once I get back from outta town I will check the fit unless someone here reports back first. Thanks Does not fit the 45C. I forgot HK has no rail slot of any kind. |
|
Quoted: Does not fit the 45C. I forgot HK has no rail slot of any kind. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Can anyone see if it fits a HK45C? Rail space is short and I dont want to go passive with a MRDS. Great pistola and I have one. Once I get back from outta town I will check the fit unless someone here reports back first. Thanks Does not fit the 45C. I forgot HK has no rail slot of any kind. Thanks for checking, guess I'm back to searching for the crimson trace IR that goes around the triggerguard... |
|
Quoted: Thanks for checking, guess I'm back to searching for the crimson trace IR that goes around the triggerguard... View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Can anyone see if it fits a HK45C? Rail space is short and I dont want to go passive with a MRDS. Great pistola and I have one. Once I get back from outta town I will check the fit unless someone here reports back first. Thanks Does not fit the 45C. I forgot HK has no rail slot of any kind. Thanks for checking, guess I'm back to searching for the crimson trace IR that goes around the triggerguard... Yea, sorry. I wish HK and others would stop with proprietary "rail systems"! |
|
In for the 11,000th read!
Heartfelt thank you for all the orders, so glad we're now getting large batches done each week. |
|
|
Large new batch starting to ship on Tuesday. Thanks for all the orders.
|
|
Quoted: Yea, sorry. I wish HK and others would stop with proprietary "rail systems"! View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Can anyone see if it fits a HK45C? Rail space is short and I dont want to go passive with a MRDS. Great pistola and I have one. Once I get back from outta town I will check the fit unless someone here reports back first. Thanks Does not fit the 45C. I forgot HK has no rail slot of any kind. Thanks for checking, guess I'm back to searching for the crimson trace IR that goes around the triggerguard... Yea, sorry. I wish HK and others would stop with proprietary "rail systems"! One reason I like my MK25 vs. other variants of 226; Sig used a proper rail instead of that Sigrail nonsense. My pistol LAMs lock up nice and tight like they're supposed to. |
|
Quoted: One reason I like my MK25 vs. other variants of 226; Sig used a proper rail instead of that Sigrail nonsense. My pistol LAMs lock up nice and tight like they're supposed to. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Quoted: Can anyone see if it fits a HK45C? Rail space is short and I dont want to go passive with a MRDS. Great pistola and I have one. Once I get back from outta town I will check the fit unless someone here reports back first. Thanks Does not fit the 45C. I forgot HK has no rail slot of any kind. Thanks for checking, guess I'm back to searching for the crimson trace IR that goes around the triggerguard... Yea, sorry. I wish HK and others would stop with proprietary "rail systems"! One reason I like my MK25 vs. other variants of 226; Sig used a proper rail instead of that Sigrail nonsense. My pistol LAMs lock up nice and tight like they're supposed to. Gotta agree with ya there Brother. |
|
Got myself a Sionyx up and running and looking into picking one of these up but reading a lot about the adjustment screws being loose. Did anyone confirm if they had a wandering zero?
|
|
I got one from the original batch that had no "loctite" on the screws and have had no problems with zero issues yet. I do have it mounted on a sig mpx though so take it for what it is. Does work great with the syonix btw.
|
|
Quoted: I got one from the original batch that had no "loctite" on the screws and have had no problems with zero issues yet. I do have it mounted on a sig mpx though so take it for what it is. Does work great with the syonix btw. View Quote Ive seen the videos of how well it worked and Im definitely wanting to stick with a made in USA option, just want it to hold zero. |
|
Quoted: Ive seen the videos of how well it worked and Im definitely wanting to stick with a made in USA option, just want it to hold zero. View Quote View All Quotes View All Quotes Quoted: Quoted: I got one from the original batch that had no "loctite" on the screws and have had no problems with zero issues yet. I do have it mounted on a sig mpx though so take it for what it is. Does work great with the syonix btw. Ive seen the videos of how well it worked and Im definitely wanting to stick with a made in USA option, just want it to hold zero. Holds zero fine. You will like the unit. |
|
Is the switch easy to use if it is not right next to a fixed sight?
|
|
|
|
Tagged, as I build my potential "bill of materials" list for jumping into NV.
I don't need the distance some others might, and De-TEST nose-heavy guns. So this might be what the doc ordered as it seems birthing/teething problems are being sorted out, which is cool to see. |
|
Don't have the IR version yet, but I do have the visible green laser. So far so good. Been three weeks and it's still not dead.
It's a marked improvement from the TOR Micro with its massive battery drain while "off" and a hard 1 week cap on battery life even if it's not used at all. Really though, this unit is great. Low profile but excellent power. I'm just nervous about its ability to hold charge while off after the experience with the TOR Micro. |
|
|
Full rate production is flowing well. Good amount of units are now in stock for immediate shipping!
Thank you for all the orders! |
|
Ordered 10-17-20, received 10-21-20. Unit looks nice, and easy to use, battery is funky. Where the hell do ya get those batteries anyway? Mounted on my duty rifle at 1200 waiting for my 14 to zero, qual and use. I'll post a NV noob review then. I haven't used NVGs since the PVS 7 was the shit. Fuck I'm old.
I see a lot of practice, trial and error in my future. |
|
Quoted: Ordered 10-17-20, received 10-21-20. Unit looks nice, and easy to use, battery is funky. Where the hell do ya get those batteries anyway? Mounted on my duty rifle at 1200 waiting for my 14 to zero, qual and use. I'll post a NV noob review then. I haven't used NVGs since the PVS 7 was the shit. Fuck I'm old. I see a lot of practice, trial and error in my future. View Quote Batts easy to find. Batts Thanks for the order, we look forward to your review. Enjoy the TOR! |
|
What's the best option for running an IR light in conjunction with this?
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.