Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/25/2006 4:53:56 PM EDT
how are they anygood? I want both a laser and tac light on my ar and this seems like a good combo. Any thoughts/opinions would be great
Link Posted: 2/25/2006 4:55:46 PM EDT
[Last Edit: 2/25/2006 4:58:15 PM EDT by 1IV]
NOT made for rifle accuracy. They are excelent on pistols.
Link Posted: 2/25/2006 4:59:06 PM EDT
is there a combo like this that is good for a rifle?
Link Posted: 2/26/2006 7:23:26 AM EDT
The Streamlight TLR2 is a light/laser combo with an 80 lumen LED output. New for 2006. Might be worth a look.

Paladin
Link Posted: 2/26/2006 4:25:15 PM EDT
Insight Tech makes a nice laser/light combo.
Link Posted: 2/26/2006 5:29:48 PM EDT

Originally Posted By Phoebus:
Insight Tech makes a nice laser/light combo.



Phoebus, are you from Phoebus,VA?

And +1 for the TLR-2.
Link Posted: 2/26/2006 6:40:24 PM EDT
I have a Insight M6X light/laser combo with the rail grabber interface. I thnk the key is getting the proper set up for a rifle. You need the unit with the rail grabber grabber interface and the long gun back plate with pressure switch. The new unit is 125 lumens and the laser can be zeroed in now and the unit is waterproof to 66'. I think Streamlight has the same light/laser combo also. I originally purchased this unit with the springloaded latch bar mount but noticed some play when it was mounted on my AR so I swapped it out for the rail grabber model. The rail grabber interface locks to the rails nice and solid. I also have the long gun back plate for it that allows the use of the included pressure switch. The pressure switch is nice but a little longer and does not fit in the Tango Down VFG cavity. Tango Down is designing a new VFG for the military for the Insight pressure switch and I have been told this will be available to the public after the military gets a hold of them.
Top Top