Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/14/2006 10:24:52 PM EDT
..I'm in the middle of a project, and it's not readily apparent.

Link Posted: 1/14/2006 10:31:14 PM EDT
are you bored or is this a serious question?
Link Posted: 1/15/2006 7:58:10 AM EDT
Serious question. Don't want to dick them up too bad getting them off.

I have a $400 dollar visible laser I never, ever use, because it's a visible laser. Gonna stuff an IR laser in there, I says.

It is apparent in taking it apart that the adjusters should be one of the last steps in reassembly. The 'screw' on top of the adjuster seems to be part of the knob.

Just looking for some knowledge before I start breaking stuff.
Link Posted: 1/16/2006 1:12:10 AM EDT
Howdy
There is no need to remove then. Simply adjust them all the way up and out of the way. The tensioning device on the bottom is what is the problem. Is the new IR laser the same diamter as the brass barrel of the old visible laser?

IPSC_GUY
SIERRA II ALPHA
Link Posted: 1/16/2006 1:20:25 PM EDT
[Last Edit: 1/16/2006 3:51:08 PM EDT by eodinert]
IM sent to IPSC GUY.

Edited to add: That dang IM thing doesn't seem to be working so well. I have some pics if you send me an email.

eodinert@yahoo.com
Top Top