Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/11/2006 1:10:43 PM EDT
Hello all, I did a search and didn't see any post that asked this. I have a M4 setup, (16" barrel) with an Aimpoint. What distance do you guys recommend sighting it in for, and what is the best procedure? Thanks!
Link Posted: 2/11/2006 1:12:22 PM EDT
Most prefer 50 yards for both an Aimpoint and a BUIS.
Link Posted: 2/11/2006 3:28:36 PM EDT
50 Yards.

Center the dot in an 8 inch shoot and see target. Adjust until your groups are in the center.
Link Posted: 2/11/2006 3:39:16 PM EDT
50yds along with my irons
Link Posted: 2/11/2006 4:38:31 PM EDT

Originally Posted By eklikwhoa:
50yds along with my irons



thats the only way to go
Link Posted: 2/11/2006 6:25:45 PM EDT
Ok, one more question,

What's the acceptable grouping for an Aimpoint?
Link Posted: 2/11/2006 6:48:14 PM EDT
You should be able to cover a 5 shot group with a Quarter at 50 yds with a 4MOA Dot. give or take an Inch with XM193 ammo.

All depends on you really.....
Link Posted: 2/12/2006 11:35:16 AM EDT
FYI - a quarter is 15/16" in diameter. Used them to measure distance from the bottom edge of my lapel to where the branch insignia needed to be.
Link Posted: 2/12/2006 11:48:39 AM EDT
[Last Edit: 2/12/2006 12:01:19 PM EDT by mm34b]
Link Posted: 2/12/2006 11:55:03 AM EDT

Originally Posted By guardian855:
Ok, one more question,

What's the acceptable grouping for an Aimpoint?



Well, considering that a 4MOA Aimpoint's red dot is 2" at 50 yards, it's hard to get more precise than a 2" group at 50 yards due to the dot being 2" itself.
Link Posted: 2/12/2006 2:29:44 PM EDT
Just cause it's 4MOA does not mean you cannot turn out a decent group





Top Top