Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 1/29/2006 5:18:34 PM EDT
I went to the gunshow in my area today and bought a Delta style scope mount for a carry handle AR. The scope is an A1Optics...sure not the best but I got a good deal on it. Anyway, I can look though the iron sights and then the scope and its WAY OFF. I also took the upper half off to kinda bore sight it. After looking through the barrel, I looked through the scope and it needs shimming or something. I counted the clicks from one extreme to the other on the scope and "mechanically zeroed" it by leaving it in the middle. It was 506 clicks total, so I left it at 253rd click. I did this for both elevation and windage. Am I screwed or what? It's a nice 3x9x40 illuminated scope and it does bring in the light real well. I got this Delta style mount to replace the mount that came with the scope in hopes that the mount was the problem. No dice. Any ideas?

Ken
Link Posted: 1/30/2006 4:22:15 AM EDT
[Last Edit: 1/30/2006 4:22:51 AM EDT by eklikwhoa]
mounted to high.

crap mount.

crap scope.



any remedy for this to work will probably cost more than what you have into it.
Top Top