Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
Posted: 10/22/2002 8:05:01 PM EDT
Will that combination fit? I am really just wanting to know if the ARMS#40 will still have room once the ACOG is mounted using the #19ACOG mount. Thanks.
Link Posted: 10/22/2002 8:49:01 PM EDT
No, but the ARMS #19ACOG will fit without the #40.
Link Posted: 10/22/2002 10:37:50 PM EDT
So your stuck with the Knights then eh? Or anything but the #40...
Link Posted: 10/23/2002 6:45:27 AM EDT
Hopefully coldblue will correct me if I'm wrong; but I don't think you can mount any back up iron sight with RAS-II and a #19ACOG.

The RAS-II is made to work with Trijicon's TA51 flattop mount. With the #19ACOG, there isn't enough room to mount that and a rear sight.

If you use the TA51 mount, you have more room to mount a back-up iron sight and you can mount any sight that will fit under an ACOG on a TA51 - which does exclude the ARMS #40.
Link Posted: 10/23/2002 11:23:45 PM EDT
so you cant mount a arms #40 under a TA01 NSN acog correct??
Link Posted: 10/23/2002 11:27:32 PM EDT

Originally Posted By FREEFALLE6:
so you cant mount a arms #40 under a TA01 NSN acog correct??



No it won't, the #40 is 0.950" tall and won't clear.

I went this route with GG&G
Link Posted: 10/24/2002 2:12:12 PM EDT
If you go to the ARMS web. they show it does fit and that I know mine does.
Good Shootin, Jack
Link Posted: 10/24/2002 6:55:00 PM EDT
Yea but the acog was mounted on a SIR system which raises the ACOG.
Link Posted: 10/24/2002 11:57:16 PM EDT
I understand now. I recently saw an ACOG and the #19 mount together, I did not realize how much bigger the #19 is from the stock mount.

Link Posted: 10/25/2002 8:35:11 PM EDT
I just received my ACOG(TA01 NSN) and it will fit with the arms #40. you just have to move the ACOG forward,not a great setup but it will work, also you can mount it normaly but the pressure of the acog pushes the arms#40 down more than is intended,which wears the finish off my $650 scope OUCH! so what im doing is getting a gg&g BUIS or one of the bushmaster BUIS's, but if you like mounting the ACOG forward it will work but not with the RAS 2.
Link Posted: 10/25/2002 8:47:17 PM EDT
Got to be careful how far forward you mount the TAO1nsn. It requires somewhat of a tight eye relief to get the most out of the sight. Mount it too far forward and you will be unable to get propper eye relief.
Link Posted: 10/26/2002 6:47:58 PM EDT
True, I decided on the gg&g sight, the bushmaster BUIS, requires me to move my ACOG too far forward.
Top Top