User Panel
You need to contact Ron directly, he will not respond to this post as he is not a member anymore. But I do know he can engrave he just did a suppressor for me and his engraving is very good I will be doing a form 1 shortly and will have him do the engraving. Also you should talk to him on the grease gun mags and block he does for standard 223 lowers. I have them for 10mm, 45acp and 50 GI they run great even in FA.
|
|
|
Originally Posted By TheMountaineer:
I think you missed the part where I said I want to use it with an existing SBR I'm not looking to buy a whole new rifle or SBR another lower - I've got enough projects already sucking the bills from my wallet I know of Rudy's USC block, but is it drop-in/easy-out requiring no mod to the lower? View Quote View All Quotes View All Quotes Originally Posted By TheMountaineer:
Originally Posted By BadgerArms:
Originally Posted By TheMountaineer:
Haven't read through the whole thread, but are any of the .45 mag well adapters drop-in for a regular lower? I would love the option to slap a .45 upper on an existing SBR without the expense of having to get a dedicated lower SBRed... The .45 ACP in a double-column magazine will not fit into the AR-15 magazine well. You would have to use an UZI .45 magazine which is 16 rounds, IIRC. I suppose it is possible to use an AR-10 lower, but that would be a massive gun. Just buy an Thureon Defense Glock-mag gun. I think you missed the part where I said I want to use it with an existing SBR I'm not looking to buy a whole new rifle or SBR another lower - I've got enough projects already sucking the bills from my wallet I know of Rudy's USC block, but is it drop-in/easy-out requiring no mod to the lower? The USC adapter IS drop in easy.......but just hang on till hopefully October.......we have a new mag almost in production, ( I am waiting on the first production samples in the next 30 days as of June 15 2015) that will run with DI uppers in a standard lower .....that will use a drop in mag block that uses the standard mag catch and has last round bolt hold open. Pardon the tardy reply....but I was on a vacation................. |
|
Officially endorsed builder of DI45 uppers for CNC Guns and GWACS Armory and the endorsed builder of DI and blowback uppers for Quartercicle 10
|
Lord, God, King, & Almighty Ruler of the Universe
NC, USA
|
Originally Posted By Mad-Machinist:
The USC adapter IS drop in easy.......but just hang on till hopefully October.......we have a new mag almost in production, ( I am waiting on the first production samples in the next 30 days as of June 15 2015) that will run with DI uppers in a standard lower .....that will use a drop in mag block that uses the standard mag catch and has last round bolt hold open. View Quote All of this is fine and I would love to see what you have, but I stand by my point that the standard AR-15 lower does not allow for a true double-stack magazine. If the point is JUST to get .45 ACP AR-15's, why not use a 1911 magazine? |
"I just couldn't stop pulling the trigger!" -- My daughter, the first time she shot a semi-automatic.
http://bit.ly/1GlG7Wm <--- YouTube Suppressor Playlist |
Reising mags are double stack and fit in a standard AR lower. I have a video on youtube proving this. Grease gun mags fit if you remove the outer reinforcing plate on the top. Uzi mags are double stack and fit a standard lower. Thompson mags fit a standard lower but require bolt carrier mods to work.
|
|
كافر
|
Lord, God, King, & Almighty Ruler of the Universe
NC, USA
|
Originally Posted By TANGOCHASER:
Reising mags are double stack and fit in a standard AR lower. I have a video on youtube proving this. Grease gun mags fit if you remove the outer reinforcing plate on the top. Uzi mags are double stack and fit a standard lower. Thompson mags fit a standard lower but require bolt carrier mods to work. View Quote Do you have a link for your channel? Uzi mags are not true double-stack. Reising mags are rare and expensive. I did not know Thompson mags fit, but then again, I haven't ever owned one, so have nothing to compare to. I'll admit that I'm a little frustrated by the fact that there ISN'T a good solution out there. Everything seems to be 'roll-your-own' or, "we plan on having it ready in three months" type posts from 2010. Where are the Thompson-mag guns, if it fits? Where are the dedicated Glock-mag lowers. Every few months, I do a thorough search. Apart from buying a Thureon .45 Glock-Mag gun, I'm pretty much out of luck. |
"I just couldn't stop pulling the trigger!" -- My daughter, the first time she shot a semi-automatic.
http://bit.ly/1GlG7Wm <--- YouTube Suppressor Playlist |
What exactly are you looking for? If it's a standard lower that takes pistol mags, there are Glock mag lowers out there but only 1 or 2 manufacturers. If it's a lower that takes high capacity mags, RMW uses Bazokka Bros lower for GG mags as well as the CNC lower that takes GG mags.
I don't get the want for a long gun that takes hand gun mags. All you achieve is a little more distance but you're still ahooting a pistol caliber. Olympic Arms makes a 15 rd mag that fits a standard lower. The real reason there aren't more options is the market doesn't justify the cost of bringing new .45 AR parts to the market. I don't have access to youtube anymore because I don't want to get a goggle email account. I already have several to keep track of. It is titled Reising mag test 2. |
|
كافر
|
Originally Posted By TANGOCHASER:
RMW uses Bazokka Bros lower for GG mags as well as the CNC lower that takes GG mags. View Quote Ron at RMW Xtreme has his own grease gun lower that he uses for his complete guns and also has it available stripped if someone wants to build the lower themselves. |
|
|
He started out using Bazooka Bros lowers for his .45 uppers. Wasn't aware he was manufacturing his own lowers now. Picture on his website looks like the BB lower minus the finger groves on the front of the mag well. Quite possible they are BB lowers with a marking variance for RMW.
|
|
كافر
|
Originally Posted By TANGOCHASER:
He started out using Bazooka Bros lowers for his .45 uppers. Wasn't aware he was manufacturing his own lowers now. Picture on his website looks like the BB lower minus the finger groves on the front of the mag well. Quite possible they are BB lowers with a marking variance for RMW. View Quote When he got them he told me they were not bb, he sourced them from another provider machined to his specs. I have 2 of his lowers and they are nice lowers. |
|
|
I can supply an upper that will run on the following....CNC Guns AR45, Bazooka Brothers BAZ45, GWACS Cav Arms with Hahn Precision adapter....all use Grease Gun mags. My uppers also run on the Quartercircle 10 Large frame Glock lower.....and we have an adapter available that uses HK USC Mags in a standard lower. The USC conversion was designed primarily for those in ban states due to the availability of 10 round magazines as well as the 15 round mags.
I also have a magazine I designed that the first production test models are supposed to be in my hands by 31 July 2015. As soon as I do final test and approval I will be dropping a purchase order for 5000 of the mags.....and hope to have complete conversion kits in quantity available both DI and blowback for Knob Creek in October. and have a revised website with a shopping cart available in November. Combined with a top load magwell adapter we will be producing......it will be a plug and play conversion for both our DI uppers and our new Blowback series of uppers that will soon be in production. Keep an eye on the Macon Armory Industry forum .....it will be the first place we make announcements concerning all the new products and developments. As soon as we have the production mags in I'll get video up of some of the testing. The new mag is designed to fit a standard lower and use the stock mag catch and have last round bolt hold open. It is compatible with both the Blowback and DI uppers. I have played with grease gun mags peeled and squeezed to fit a standard lower....and I wouldn't trust my life to it.....Thompson mags are too wide......while you can open up a standard lower to accept them you also must modify the upper to clear the feed lips and trying to get a DI upper to feed from the double feed mag is not a pleasant task. Reising mags are also too wide for a standard lower...at least the ones I have are.................I have original and some of the 30 round Ken Christie mags that I have worked with...not a satisfactory solution for a production system although once again they can be made to work by a dedicated builder. I can do a 1911 mag holder/adapter.....but haven't primarily as the demand just isn't there......(My Opinion)......the amount of time and money that has to be expended to produce something like that is in the thousands when you figure labor, programming, materials, tooling and fixtures to make it......and it just isn't economical to sell 3 or 4....with that said...it is on my to do list.....but I just have more economically viable projects on the same list ahead of it. Rudy |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Lord, God, King, & Almighty Ruler of the Universe
NC, USA
|
Originally Posted By TANGOCHASER:
What exactly are you looking for? If it's a standard lower that takes pistol mags, there are Glock mag lowers out there but only 1 or 2 manufacturers. If it's a lower that takes high capacity mags, RMW uses Bazokka Bros lower for GG mags as well as the CNC lower that takes GG mags. View Quote View All Quotes View All Quotes Originally Posted By TANGOCHASER:
What exactly are you looking for? If it's a standard lower that takes pistol mags, there are Glock mag lowers out there but only 1 or 2 manufacturers. If it's a lower that takes high capacity mags, RMW uses Bazokka Bros lower for GG mags as well as the CNC lower that takes GG mags. I have sent off an email to RMW. I am looking for a full-up factory gun. I was hoping to avoid the Grease Gun route, but might end up going that way. I don't get the want for a long gun that takes hand gun mags. All you achieve is a little more distance but you're still ahooting a pistol caliber. Olympic Arms makes a 15 rd mag that fits a standard lower. I want to a suppressor-friendly carbine. Yeah, I can suppress a 9mm carbine, but in the end it's a 147gr bullet with a .355" cross-section. The .45 is a 230gr bullet with a .452" cross section. I'd call that a significant difference. My 7th grade math says that's almost 60% greater diameter and bullet weight As far as the 'takes handgun mags' analogy. I already have a few dozen Glock 21 magazines for my G21. The Korean .45 mags work well and hold 26ish rounds. The suppressor changes the game as far as utility goes. I see tac-tards with .300 Whisper, uh, I mean 300 AAC MotherF***ing BLACKOUT! guns that are a .30 caliber bullet cruising at, uh, subsonic. Why not get a heavier bullet that's pre-expanded? Still wasn't able to find the youtube video. I do like the Thureon Defense .45 guns on paper, but I've not seen one in the wild... only their 9mm's and their early ones at that. Thanks for clarifying the RMW situation. At least that gives me an option. This thread is TL:DR and I must have missed that one. |
"I just couldn't stop pulling the trigger!" -- My daughter, the first time she shot a semi-automatic.
http://bit.ly/1GlG7Wm <--- YouTube Suppressor Playlist |
Lord, God, King, & Almighty Ruler of the Universe
NC, USA
|
Originally Posted By Mad-Machinist:
I can supply an upper that will run on the following....CNC Guns AR45, Bazooka Brothers BAZ45, GWACS Cav Arms with Hahn Precision adapter....all use Grease Gun mags. My uppers also run on the Quartercircle 10 Large frame Glock lower.....and we have an adapter available that uses HK USC Mags in a standard lower. The USC conversion was designed primarily for those in ban states due to the availability of 10 round magazines as well as the 15 round mags. I also have a magazine I designed that the first production test models are supposed to be in my hands by 31 July 2015. As soon as I do final test and approval I will be dropping a purchase order for 5000 of the mags.....and hope to have complete conversion kits in quantity available both DI and blowback for Knob Creek in October. and have a revised website with a shopping cart available in November. Combined with a top load magwell adapter we will be producing......it will be a plug and play conversion for both our DI uppers and our new Blowback series of uppers that will soon be in production. Keep an eye on the Macon Armory Industry forum .....it will be the first place we make announcements concerning all the new products and developments. As soon as we have the production mags in I'll get video up of some of the testing. The new mag is designed to fit a standard lower and use the stock mag catch and have last round bolt hold open. It is compatible with both the Blowback and DI uppers. I have played with grease gun mags peeled and squeezed to fit a standard lower....and I wouldn't trust my life to it.....Thompson mags are too wide......while you can open up a standard lower to accept them you also must modify the upper to clear the feed lips and trying to get a DI upper to feed from the double feed mag is not a pleasant task. Reising mags are also too wide for a standard lower...........I have original and some of the 30 round Ken Christie mags that I have worked with...not a satisfactory solution for a production system although once again they can be made to work by a dedicated builder. View Quote Very interesting info. Is the magazine you designed a double-stack, single feed? Capacity? |
"I just couldn't stop pulling the trigger!" -- My daughter, the first time she shot a semi-automatic.
http://bit.ly/1GlG7Wm <--- YouTube Suppressor Playlist |
Yes...double stack single feed within the limitations of the magwell and adapter.......the initial mags are slated to be 16 round capacity....the prototype have been found to be compatible with both our DI and Blowback 45 uppers that will be available in the near future.
I have another mag that still has either follower, rib design, or material issues that will take a different style (2 piece) adapter or a dedicated lower that is on the back burner for now.....it is 20 round capacity....we are concentrating on the 16 round mag for now due to it's compatibility with a standard lower........ I'll be honest...I love my CNC lowers.......a 16 inch upper on a CNC lower with an M68 aimpoint is what rides in my truck with me daily. Not callin Bill...TANGOCHASER, out on the Reising.....but the mags I have are too wide for any of the 2 dozen different manufacture of lowers I have on hand....... And Bill.......give me a call dammit..... haven't heard from you in a while...... |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Originally Posted By Mad-Machinist: Yes...double stack single feed within the limitations of the magwell and adapter.......the initial mags are slated to be 16 round capacity....the prototype have been found to be compatible with both our DI and Blowback 45 uppers that will be available in the near future.
I have another mag that still has either follower, rib design, or material issues that will take a different style (2 piece) adapter or a dedicated lower that is on the back burner for now.....it is 20 round capacity....we are concentrating on the 16 round mag for now due to it's compatibility with a standard lower.. View Quote Hate to say it, but I'd be very reluctant to buy a proprietary magazine from a small manufacturer. I get that it solves a lot of problems, but magazine availability is what kills semi-autos. It could be the greatest magazine ever invented, but I wouldn't touch your design until someone else was making it in quantity. Kudos to your inventiveness - magazines are seemingly the most difficult part to design and build properly in small-arms. |
|
Thanks to HammerHammer for the Team Membership.
|
I already have the first 10,000 mags funded.......springs are made by Newcomb Spring out of heat treated 17-7 stainless to lessen/eliminate the issues of compression set.......and that is heat treated AFTER they are wound.......and the first 10,000 springs are in transit to Macon Armory right now. rest assured....we are here to stay.......I'm producing them because all the mag manufacturers I contacted weren't interested .....or want ridiculous money for initial tooling.......and the mag body, floorplate, and follower are all steel......
Had one want me to make a follower to run in their 9mm mag...... Also, the new mag should be usable with existing Uzi mag pouches and accessories. |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Originally Posted By Mad-Machinist: I already have the first 10,000 mags funded.......springs are made by Newcomb Spring out of heat treated 17-7 stainless to lessen/eliminate the issues of compression set.......and that is heat treated AFTER they are wound.......and the first 10,000 springs are in transit to Macon Armory right now. rest assured....we are here to stay.......I'm producing them because all the mag manufacturers I contacted weren't interested .....or want ridiculous money for initial tooling.......and the mag body, floorplate, and follower are all steel......
Had one want me to make a follower to run in their 9mm mag...... Also, the new mag should be usable with existing Uzi mag pouches and accessories. View Quote Are they compatible w/ .45" ACP Uzis, or can they be modified to work? If it's cross-compatible, or another mag can be modified & substituted for yours, that would be a much-more viable platform, and I'd be a lot more interested. |
|
Thanks to HammerHammer for the Team Membership.
|
The new adapter will run with modded Uzi mags....I don't see the new mag running with Uzi's though although it isn't impossible.....the LRBHO feature would probably keep it form going in the grip......I have a couple of UZI kits that I'm gonna build as post samples eventually, will try and look at a grip/magwell tomorrow....but bottom line...it is an AR45 mag and we aren't planning on shortages ....I have one company making them now and we are talking to another in case....
|
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
I should have added the Reising mags need the squeeze dance but work fine afterward. I did not continue with Reising R&D due to the cost of the mags. Thompson mags need squeezing as well but also require upper mods and won't work with a BB set up as the bolt won't pick up the rounds. I'm talking about an Oly .45 set up. I have seen a Colt BB version using an opened up 9mm Colt bolt that worked but sadly the maker passed away.
I have a CNC lower machined to take GG mags and Thompson mags. The upper and the bolt carrier need machining similar to the ARs that take AK mags. Mine is about 60% complete. My youtube Reising video is probably archived as it dates back to 2005. |
|
كافر
|
Originally Posted By Mad-Machinist: The new adapter will run with modded Uzi mags....I don't see the new mag running with Uzi's though although it isn't impossible.....the LRBHO feature would probably keep it form going in the grip......I have a couple of UZI kits that I'm gonna build as post samples eventually, will try and look at a grip/magwell tomorrow....but bottom line...it is an AR45 mag and we aren't planning on shortages ....I have one company making them now and we are talking to another in case.... View Quote Ok, fair enough. If there's an alternate supply of mags, then you're good. No one plans on shortages. Looked for .22" LR lately? |
|
Thanks to HammerHammer for the Team Membership.
|
Originally Posted By backbencher:
Ok, fair enough. If there's an alternate supply of mags, then you're good. No one plans on shortages. Looked for .22" LR lately? View Quote View All Quotes View All Quotes Originally Posted By backbencher:
Originally Posted By Mad-Machinist: The new adapter will run with modded Uzi mags....I don't see the new mag running with Uzi's though although it isn't impossible.....the LRBHO feature would probably keep it form going in the grip......I have a couple of UZI kits that I'm gonna build as post samples eventually, will try and look at a grip/magwell tomorrow....but bottom line...it is an AR45 mag and we aren't planning on shortages ....I have one company making them now and we are talking to another in case.... Ok, fair enough. If there's an alternate supply of mags, then you're good. No one plans on shortages. Looked for .22" LR lately? Another reason I contracted the mags to a sheet metal company not in the firearms industry...... |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Lord, God, King, & Almighty Ruler of the Universe
NC, USA
|
I'm sorry, but a 16-round capacity is not what I am looking for. I can get that in my Glock. I can get a shoulder stock kit and from-1 my Glock then I have a Glock AND an SBR when I want one. And I can get a 26-round magazine for it if I want. I also understand that using a standard AR-15 lower is a draw. The problem there is that you end up making too many compromises doing it that way. I think the G2 DPMS AR-10 might be the perfect platform for a DI .45. The mag well is large enough and re-cored AR-10 mag should work dandy as it's already the right size. I did get a quote for a GG mag gun that would fit my needs, but I am still thinking that a Glock-mag lower is the only reasonable path at this point.
|
"I just couldn't stop pulling the trigger!" -- My daughter, the first time she shot a semi-automatic.
http://bit.ly/1GlG7Wm <--- YouTube Suppressor Playlist |
Couldn't agree more.....the standard lower DOES place a restriction.....unless you want to make the mags stupid long......so I do concentrate on compatibility....the Macon Armory DI 45 upper will run on CNC AR45, BAZ45, GWACS Cav arms with Hahn Magwell adapter(all grease gun options) QC10 Large frame as well as the standard lower offering we have. The new blowback option has been run on a standard lower as well as a QC10 and a version to work with the CNC and BAZ lowers is in the works as well.
If we can be of assistance don't hesitate to give us a shout........ |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Any chance the blowback system will be sold as a parts kit? Barrel/bolt/buffer combo?
|
|
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Originally Posted By Mad-Machinist:
Giving that some serious thought right now......... View Quote View All Quotes View All Quotes Originally Posted By Mad-Machinist:
Originally Posted By m6z:
Any chance the blowback system will be sold as a parts kit? Barrel/bolt/buffer combo? Giving that some serious thought right now......... Good to know. Any idea on what SBR/Pistol length barrels you are going to offer? 6", 8" or ? Hopefully threaded 5/8x24. I may of missed it.... When are you planning on having the blowback stuff for sale? I've got an Octane 45 & a slick side upper. Just waiting for you to release your parts and a KAC URX4 handguard. Thinking about getting a Glock large frame lower and getting the form 1 in the mail. I'll probably wait till your mags are out though. I could go either way and if I can use a standard lower it'll save me the cost of the Glock lower and the tax stamp. |
|
|
Qc10 has 45 blowback barrels in stock and their bolts are 3 weeks out.
|
|
|
Originally Posted By m6z:
Good to know. Any idea on what SBR/Pistol length barrels you are going to offer? 6", 8" or ? Hopefully threaded 5/8x24. I may of missed it.... When are you planning on having the blowback stuff for sale? I've got an Octane 45 & a slick side upper. Just waiting for you to release your parts and a KAC URX4 handguard. Thinking about getting a Glock large frame lower and getting the form 1 in the mail. I'll probably wait till your mags are out though. I could go either way and if I can use a standard lower it'll save me the cost of the Glock lower and the tax stamp. View Quote View All Quotes View All Quotes Originally Posted By m6z:
Originally Posted By Mad-Machinist:
Originally Posted By m6z:
Any chance the blowback system will be sold as a parts kit? Barrel/bolt/buffer combo? Giving that some serious thought right now......... Good to know. Any idea on what SBR/Pistol length barrels you are going to offer? 6", 8" or ? Hopefully threaded 5/8x24. I may of missed it.... When are you planning on having the blowback stuff for sale? I've got an Octane 45 & a slick side upper. Just waiting for you to release your parts and a KAC URX4 handguard. Thinking about getting a Glock large frame lower and getting the form 1 in the mail. I'll probably wait till your mags are out though. I could go either way and if I can use a standard lower it'll save me the cost of the Glock lower and the tax stamp. Standard muzzle thread is 5/8 x 24.......first mags are supposed to ship to me for testing 31 July....I will run hell out of them the following week.....and if all is well drop a PO for a production run the following Friday....hope to have them ready for sale before Knob Creek in October (we'll be there with DI and blow back uppers)....I'm open to suggestions for barrel lengths....working on the 16 inch program right now.....and will be doing one long enough to put Front sight base boss in the proper position for a carbine handguard......and one for a free float 7 inch handguard to put the flash suppressor out in front of it by about 1/8th of an inch.......and will be running some 5 inch as well...... |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Those lengths sound good. A 5" will work for my needs.
Shoot me a PM when you've got a 5" barrel and a bolt ready for sale. |
|
|
I'll have 5 inch and bolts before the mags....possibly by next week............
|
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
|
who is selling/making the mag blocks for the .45?
when can I get .45 BCG, mags, mag block & Barrel? Originally Posted By Mad-Machinist: Hope to have these in production in time for Christmas.............first offering will be 20 rounds and will run with both the DI and Blowback 45 upper........on a standard lower....as soon as it is rolling we have plans for 10 round mags to service those of you behind enemy lines...........uses a magwell adapter and and runs in a STANDARD AR15 lower......uses standard mag catch and will be bullet button compatible. https://www.youtube.com/watch?v=tPvaOt0RbA8 View Quote |
|
Funny how brave are the little chipmunks when posting from the security of their Mom's basement
|
That would be me....aka Macon Armory....... as I mentioned...we hope to have the mags, new adapter and parts in full production by Christmas...
that was just a teaser...as soon as I have parts on the shelf...I'll post up in the Macon Armory Vendor forum prices and how to order......working on the website too.... |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Just got back from the final preproduction review....we will have the first test batch of production mags on the 30th of Oct 2015.....less than 10 days..................................and we are having some 10 round bodies made as well.......
|
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Originally Posted By Mad-Machinist:
Just got back from the final preproduction review....we will have the first test batch of production mags on the 30th of Oct 2015.....less than 10 days..................................and we are having some 10 round bodies made as well....... View Quote Great news Rudy!! |
|
|
...
|
|
|
Nope....had to find another vendor....over a year with no success......the new guys put a fully functional prototype in my hand in 4 weeks.......Cleveland isn't a loss though.....we will be using the follower they made...it was good and the new vendor designed around it......
But the speed and flexibility of the new vendor will allow us to do some pretty cool things in the future......looking into the possibility of some pistol caliber AK's down the road |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Saw one here earlier but have others picked up Glock mag lowers? How are they working?
ETA: Should my DI45 be fine with 45 Super w/ heavier buffer? |
|
Extremism in defense of liberty is no vice. Tolerance in the face of tyranny is no virtue. - Barry Goldwater, 1964
|
Originally Posted By Mad-Machinist:
Nope....had to find another vendor....over a year with no success......the new guys put a fully functional prototype in my hand in 4 weeks.......Cleveland isn't a loss though.....we will be using the follower they made...it was good and the new vendor designed around it...... But the speed and flexibility of the new vendor will allow us to do some pretty cool things in the future......looking into the possibility of some pistol caliber AK's down the road View Quote Any update for us? The mag issue is one of the few things staying my hand to start an AR45. |
|
|
working on final tweaks on the new design...having issues with loading when nearing capacity...it runs great...just want to make sure it is right before we go to production.
|
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
hey I am new to the sight! I AM AN 11 YEAR MILITARY VETERAN I have been building my own 80% AR,s since 2006. I decided to build an AR-45 I done some research and decided to use a advantechprecision 80 % lower, I ordered it on Dec 22 2015, it was supposed to be delivered in 2-3 weeks it is now march 11 2016 numerous phone calls and e-mails have never been returned. I have filed a claim with the B.B.B. and contacted my bank to investigate the charge for failure to deliver the product as stated on there WEB site. DO NOT BUY FROM [ADVANTECHPRECISION] THEY WILL NOT DELIVER THERE PRODUCT.
|
|
|
I see a ton of vapor wear on this thread.
I need a .45ACP SBR blow back complete upper. Now. What is available right now? Some of this shit has been promised for years and still isn't available anywhere I can find. Not a fucking thing in stock. I could use a bolt and barrel compatible with GG mags, as I have a standard upper in my junk bin, but prefer to have a complete upper ready to run. Save me from another Oly upper. Please. Do it. Does anyone sell Oly at a discount, or will I need extra pepper for my angus? |
|
Ignorance is not a point of view.
|
Built an upper last month from a QC!0 bolt and barrel. Had to get them from Rainier Arms and JSE Surplus. Was already sitting on a RRA Upper and SLR handguard. You just have to look and/or be patient.
|
|
|
I use exclusively 230 gr plated round nose over full loads of Win 231, which you said was too fast for DI. If this remains true, can you email me a quote for a 8" blowback complete flat top upper, no carry handle, and can I order over the intarwebs or phone?
I have a CNC lower and GG mag. .578x28 threaded Gemtech GM-45 will go on it, but I guess there are different adapters to match a variety of threads. What threads will it come with? I will probably run a Midwest Industries handguard and barrel nut, so if it doesn't come with that, I won't need it to be that complete if I can get just the remaining parts. Is your ejector like the Oly? I couldn't find pics when I took a look through the thread. I am off to do a form 1 right now........... |
|
Ignorance is not a point of view.
|
Originally Posted By wildearp:
I use exclusively 230 gr plated round nose over full loads of Win 231, which you said was too fast for DI. If this remains true, can you email me a quote for a 8" blowback complete flat top upper, no carry handle, and can I order over the intarwebs or phone? I have a CNC lower and GG mag. .578x28 threaded Gemtech GM-45 will go on it, but I guess there are different adapters to match a variety of threads. What threads will it come with? I will probably run a Midwest Industries handguard and barrel nut, so if it doesn't come with that, I won't need it to be that complete if I can get just the remaining parts. Is your ejector like the Oly? I couldn't find pics when I took a look through the thread. I am off to do a form 1 right now........... View Quote I don't recall the conversation on the load...as long as it is within 45 ACP parameters shouldn't be an issue.....what is the muzzle velocity on the load......the blowback is a Colt pattern.....and unfortunately won't run with a grease gun lower...needs a feed ramp.......ejector is in the mag adapter.......like a 9mm. give me a shout at the shop and lets get something figured out for you.....DI is the answer for you....if the load is more in the 45 super range.......we can always lake a barrel with a little longer gas system......either way I'll get you squared away. |
|
Builder Specializing in both DI and Blowback pistol caliber uppers....Endorsed by CNC Guns, GWACS Defense, and Quartercircle 10
45 ACP, 10mm, 40S&W, 9mm and 7.62 Tokarev. |
Ignorance is not a point of view.
|
An easy work around is possible too: use a lower that accepts Glock magazines, and build it in 45 GAP.
Replace the bolt with one that has a .473 face on it, and you're good to go. That's what I'm doing. G. |
|
|
I built the first AR in .45 GAP (as far as I know). Used a Thompson SMG barrel by shortening the breach. Ran like a raped ape with an Oly blowback set up. It used 9mm Sten mags with the feed lips opened up a little.
|
|
كافر
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.